Skip to content
View in the app

A better way to browse. Learn more.
Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Unraid Summer Sale in live: 20% off Starter and Unleashed + buy one, get one 50% off

Are all drives failing? Controller?

rawfuls
in Storage Devices and Controllers

Featured Replies

Woke up this morning to a plethora of issues in the email notification system.

Had a similar instance in which disk1/disk3 also had the same failures. I ran SMART long test and it all passed. Assuming it was a bad cable connection, I unplugged and replugged, then rebuilt the drive (set drive as NA, started array. Stopped, set drive as identifier, started array. Rebuilt).

 

However, this time around it seems disk1/2/5 are seeing issues.

However, I also noticed when I logged into the WebGUI this morning, only disk1 was showing disabled on the dashboard.

I tried stopping the array, it wouldn't; so about 45mins later, I rebooted. It's never come up since (server is at my parent's house). (can't ping server IP via VPN).

I do plan on stopping by sometime this upcoming week to take a look, but want to see if anybody had some insight.

Should I start shopping for a new controller?

 

Controller: SAS9201-8I LSI

 

**** disk1 (ST4000LM024-2AN17V_WFF0FXMF) is disabled ****

**** parity (WDC_WD100EMAZ-00WJTA0_JEKU74UZ) has read errors ****

**** disk1 (ST4000LM024-2AN17V_WFF0FXMF) has read errors ****

**** disk2 (ST4000LM024-2AN17V_WCK2F91N) has read errors ****

**** disk3 (ST4000LM024-2AN17V_WCK2SVE2) has read errors ****

**** disk4 (ST4000LM024-2AN17V_WCK2SV4V) has read errors ****

**** disk5 (WDC_WD50EZRX-00MVLB1_WD-WX31D15P76C3) has read errors ****

**** parity2 (WDC_WD100EMAZ-00WJTA0_JEKTZ10Z) has read errors ****

**** /var/log is getting full (currently 84 % used) ****

**** Unable to write to disk1 ****

**** Unable to write to disk2 ****

**** Unable to write to disk5 ****   

hoangserver-diagnostics-20200913-0836.zip

  • Quote

    Looks like a controller issue. make sure it's well seated and sufficiently cooled, you should also upgrade it to latest firmware (20.00.07.00), and can also try a different slot if available.

  • Quote
    • Author

    Ah, that's what I feared.

    I removed the low profile mount and never bought a full size mount, but do recall reseating the board cleanly.

     

    Since my time is limited, I think having a replacement on hand is probably smarter than trying something and having it fail again in a week.

    Thanks!

  • Quote

    • Archived

    This topic is now archived and is closed to further replies.

    Go to topic listing

    Account

    Navigation

    Search

    Search

    Configure browser push notifications
    Chrome (Android)
    1. Tap the lock icon next to the address bar.
    2. Tap Permissions → Notifications.
    3. Adjust your preference.
    Chrome (Desktop)
    1. Click the padlock icon in the address bar.
    2. Select Site settings.
    3. Find Notifications and adjust your preference.