Nealon Posted February 7, 2021 Share Posted February 7, 2021 Am I the only one who can't get the "Documentary Shows" and "Anime Shows" counters working? Not sure how it's pulling this genre information, or if I could change it to pull a different genre, but mine just show N/A: I'd love to get these working and be able to tweak them if possible. Haven't been able to dig up anything on how to do that though. Also, I'd love to add a map that shows all the locations of the IP addresses I've ever streamed to (not just the one's I'm actively streaming to) if possible. Any help is appreciated! This is so cool though, thanks to everyone who put time/effort into it. What a wonderful tool. 1 Quote Link to comment
falconexe Posted February 7, 2021 Author Share Posted February 7, 2021 On 1/26/2021 at 7:12 PM, mattekure said: safe travels Thanks for that. I'm back in town. Quote Link to comment
falconexe Posted February 7, 2021 Author Share Posted February 7, 2021 55 minutes ago, Nealon said: Am I the only one who can't get the "Documentary Shows" and "Anime Shows" counters working? Not sure how it's pulling this genre information, or if I could change it to pull a different genre, but mine just show N/A: I'd love to get these working and be able to tweak them if possible. Haven't been able to dig up anything on how to do that though. Also, I'd love to add a map that shows all the locations of the IP addresses I've ever streamed to (not just the one's I'm actively streaming to) if possible. Any help is appreciated! This is so cool though, thanks to everyone who put time/effort into it. What a wonderful tool. You need to edit the query by selecting your proper Plex Library section. If your library section names happen to mach the UUD (mine since I'm the developer) exactly, they will just magically work. So edit the panel, head over to the query, and click the library section tag and select from the auto populated drop own menu. Do this for all fo the N/As and you'll be in business. You can also copy any of these, change the color if you want, pick a different section, and change the name. So you can add things like Stand-Up, UFC, Home Movies, etc. This is just a template. Make it your own... And for the map that shows all locations, that should be possible. I'll see what I can figure out. 1 Quote Link to comment
hogfixer Posted February 7, 2021 Share Posted February 7, 2021 1 hour ago, Nealon said: Am I the only one who can't get the "Documentary Shows" and "Anime Shows" counters working? Not sure how it's pulling this genre information, or if I could change it to pull a different genre, but mine just show N/A: I'd love to get these working and be able to tweak them if possible. Haven't been able to dig up anything on how to do that though. Also, I'd love to add a map that shows all the locations of the IP addresses I've ever streamed to (not just the one's I'm actively streaming to) if possible. Any help is appreciated! This is so cool though, thanks to everyone who put time/effort into it. What a wonderful tool. Like falconexe said, "You need to edit the query by selecting your proper Plex Library section. If your library section names happen to mach the UUD (mine since I'm the developer) exactly, they will just magically work. So edit the panel, head over to the query, and click the library section tag and select from the auto populated drop own menu. Do this for all fo the N/As and you'll be in business." You should also change the Panel title and Alias by fields to the new type of show. 1 Quote Link to comment
falconexe Posted February 7, 2021 Author Share Posted February 7, 2021 39 minutes ago, hogfixer said: Like falconexe said, "You need to edit the query by selecting your proper Plex Library section. If your library section names happen to mach the UUD (mine since I'm the developer) exactly, they will just magically work. So edit the panel, head over to the query, and click the library section tag and select from the auto populated drop own menu. Do this for all fo the N/As and you'll be in business." You should also change the Panel title and Alias by fields to the new type of show. Ha Ha. Love the “Japanese Monster Movies”. You have a whole section just for them. Nice... Quote Link to comment
Nealon Posted February 7, 2021 Share Posted February 7, 2021 2 hours ago, falconexe said: You need to edit the query by selecting your proper Plex Library section. If your library section names happen to mach the UUD (mine since I'm the developer) exactly, they will just magically work. So edit the panel, head over to the query, and click the library section tag and select from the auto populated drop own menu. Do this for all fo the N/As and you'll be in business. You can also copy any of these, change the color if you want, pick a different section, and change the name. So you can add things like Stand-Up, UFC, Home Movies, etc. This is just a template. Make it your own... And for the map that shows all locations, that should be possible. I'll see what I can figure out. Ahhh, they're just the library names... so if I wanted the documentary portion to work, I'd have to split out all my documentaries into separate libraries. Got it. Thank you very much for clarifying that. And let me know if I can help at all on the all locations map, though I'm guessing it'd be more difficult to collaborate. Mostly just didn't mean to shove that off on you, thank you for your help though! And thanks to @hogfixer too! 1 Quote Link to comment
Pope Viper Posted February 10, 2021 Share Posted February 10, 2021 Hi folks - I'm trying to get the Varken side of things working, and seem to be having some difficulties. Is there an existing support thread for it somewhere? The Installation guide on the wiki seems to be blank. I'm updating the Varken.ini with the API keys to Tatulli, and after I do so, Varken refuses to start. I'm sure it's something obvious, but I'm banging my head against it. Quote Link to comment
ChatNoir Posted February 10, 2021 Share Posted February 10, 2021 There was a complete video tutorial posted some pages back if I remember correctly. Quote Link to comment
LTM Posted February 10, 2021 Share Posted February 10, 2021 10 hours ago, Pope Viper said: Hi folks - I'm trying to get the Varken side of things working, and seem to be having some difficulties. Is there an existing support thread for it somewhere? The Installation guide on the wiki seems to be blank. I'm updating the Varken.ini with the API keys to Tatulli, and after I do so, Varken refuses to start. I'm sure it's something obvious, but I'm banging my head against it. Can you post your unRAID log of Varken? My guess is that you did not go through the process of getting a maxmind license key and it's failing to download the database upon start which would cause it to fail. You can sign up for a free account here: https://www.maxmind.com/en/geolite2/signup Quote Link to comment
ChatNoir Posted February 10, 2021 Share Posted February 10, 2021 (edited) I am quite happy with 1.5, some adjustments are needed for my configuration obviously and I tackle this once in a while. Most of the time I manage to make the changes on my own but a few things are not that easy for me. I'd rather have the Array / Plex growth on the last 7d / 30d / 365d rather than the active week / month / year. I think it would provide a more regular progression and not have such a big change one day to the other. If you agree and integrate this into 1.6, I'll live with it until then. If not, I'd appreciate some help on how to change this on my side. The other point is quite strange and I suppose that it is not widespread or other people would definitely have reported it. My Docker RAM Graph can reach several Exabyte. My server is good, but not THAT good ! any idea where to look ? Edited February 11, 2021 by ChatNoir un-necessary image Quote Link to comment
Energen Posted February 11, 2021 Share Posted February 11, 2021 (edited) I finally took the time to set this up and it's pretty cool... I saw it when it was first announced but never had time to figure out what to do with it. I will say that I thought I had Plex stats working, and then they weren't.. so did I ever have them working? IDK... so I was thinking to myself "hmm".. and started looking around... on page 24, I think, of this thread I saw to create a varken data source for UUD which I guess I never created... or wasn't saved? Not sure... Someone, really, absolutely, needs to create a new, updated, step by step installation guide for every single aspect of this and get it posted in the first thread... There are way too many steps involved and too many pages to go through to find every little detail of this. Very neat addon but very detailed to install, but not worth scouring 32+ pages of information.. Also, don't know how useful it would be to add or display, but since this is the "ultimate" dashboard, is there a way to integrate stats from / like this: Edited February 11, 2021 by Energen Quote Link to comment
Energen Posted February 11, 2021 Share Posted February 11, 2021 22 hours ago, Pope Viper said: Hi folks - I'm trying to get the Varken side of things working, and seem to be having some difficulties. Is there an existing support thread for it somewhere? The Installation guide on the wiki seems to be blank. I'm updating the Varken.ini with the API keys to Tatulli, and after I do so, Varken refuses to start. I'm sure it's something obvious, but I'm banging my head against it. I was having this problem as well............. it SEEMS to be down to the startup order of the docker containers. My startup order is now influxdb -> telegraf -> tautulli -> varken -> grafana Previously varken was somewhere closer to influxdb and was always not-running. Changed the order and haven't had a problem since. * if this is accurate then it's a good tip for a guide to setting this up! Quote Link to comment
Pope Viper Posted February 11, 2021 Share Posted February 11, 2021 OK, I had most of this up and running with GUS, but decided I would rather not have all services within one docker, so I removed GUS, and went the InfluxDB/Telegraf/Grafana route. Influx went fine, I'm currently jacking around with Telegraph. I've got the basic telegraf.conf in place, however, the post arguments don't seem to be working for me. I've tried to telegraf console to install the smartmontools, but I'm apparently not getting the syntax down correctly. I've tried the apk add commands, but not getting anywhere. I'm an old school Windows guy, and getting there slowly with Linux, any help would be greatly appreciated! Quote Link to comment
Pope Viper Posted February 12, 2021 Share Posted February 12, 2021 Ok, I worked on it today, and finally have made some progress. I've got Varken up and running, feeding data into UUD, turns out that I hadn't designated the set the Varken DB into the various panels. So, that being said. I've got a few questions: 1) During my first attempt at this, I was able to designate my Cache/Array/Parity/Flash drives. On this attempt, when I select the drop down for a given drive, my only option is "None" I am seeing array stats, and the drives are showing up under the Drive S.M.A.R.T Health overview So I'm really not sure why the drives aren't populating in the Flash/Cache/Parity/Array areas. 3) Some panels indicate that they require IPMI and REGEX. I've installed the IPMI tools, but not sure how to do REGEX. Also, I'm seeing this in my telegraf log: 2021-02-12T23:17:50Z E! [inputs.sensors] Error in plugin: failed to run command /usr/bin/sensors -A -u: exit status 1 - So I need some assistance in addressing that. Thanks for any help! Quote Link to comment
FreeMan Posted February 19, 2021 Share Posted February 19, 2021 Is the `Array Growth (Day)` chart designed to show new data added since midnight <My timezone>? If so, I don't think mine's working right. Here's what it's showing currently: And here's my TZ setting: I can only account for about 3GB of data added since midnight. I've checked my backup directory and have had very little added there of late. As I was typing this, I got to wondering if this shows the data added in the previous 24 hours, as noted in the TZ settings screen shot. If that's the case, why does the growth graph start at zero for a little while before climbing? Does that not show growth over the time period? Quote Link to comment
falconexe Posted February 19, 2021 Author Share Posted February 19, 2021 1 hour ago, FreeMan said: Is the `Array Growth (Day)` chart designed to show new data added since midnight <My timezone>? If so, I don't think mine's working right. Here's what it's showing currently: And here's my TZ setting: I can only account for about 3GB of data added since midnight. I've checked my backup directory and have had very little added there of late. As I was typing this, I got to wondering if this shows the data added in the previous 24 hours, as noted in the TZ settings screen shot. If that's the case, why does the growth graph start at zero for a little while before climbing? Does that not show growth over the time period? Are you using Cache? It won’t show anything until the mover runs and the data hits the actual array. It is designed to pick up data changes within 30 seconds (assuming your Telgraf config update interval matches). The selected Grafana timeframe has no impact on these growth queries because they are set to explicit relative time intervals individually. In the upper right you’ll see “Today so far” in blue. This means that the graph starts at Midnight. The uptick may have been your mover. Mine works perfectly... Quote Link to comment
FreeMan Posted February 19, 2021 Share Posted February 19, 2021 41 minutes ago, falconexe said: Are you using Cache? It won’t show anything until the mover runs and the data hits the actual array. It is designed to pick up data changes within 30 seconds (assuming your Telgraf config update interval matches). The selected Grafana timeframe has no impact on these growth queries because they are set to explicit relative time intervals individually. In the upper right you’ll see “Today so far” in blue. This means that the graph starts at Midnight. The uptick may have been your mover. Mine works perfectly... Ah! That makes perfect sense and, yeah, I knew that. This makes sense - that's yesterday's growth, since it was all written to cache and the mover ran around 01:30 today. Quote Link to comment
AnimusAstralis Posted February 20, 2021 Share Posted February 20, 2021 Is there a straightforward way to make Telegraf read data from NUT plugin instead of APC UPS daemon? I can't find info on this anywhere. Quote Link to comment
GilbN Posted February 20, 2021 Share Posted February 20, 2021 2 hours ago, AnimusAstralis said: Is there a straightforward way to make Telegraf read data from NUT plugin instead of APC UPS daemon? I can't find info on this anywhere. https://technicalramblings.com/blog/monitoring-your-ups-stats-and-cost-with-influxdb-and-grafana-on-unraid-nut-edition/ Use this as a starting point. Quote Link to comment
PLAY3R Posted February 21, 2021 Share Posted February 21, 2021 (edited) Help! What am I doing wrong? Thanks fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/main/x86_64/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/community/x86_64/APKINDEX.tar.gz v3.12.3-119-gadcf08925b [http://dl-cdn.alpinelinux.org/alpine/v3.12/main] v3.12.3-114-g726dc65b43 [http://dl-cdn.alpinelinux.org/alpine/v3.12/community] OK: 12751 distinct packages available OK: 58 MiB in 36 packages OK: 58 MiB in 36 packages 2021-02-21T02:12:38Z I! Starting Telegraf 1.17.2 2021-02-21T02:12:38Z I! Using config file: /etc/telegraf/telegraf.conf 2021-02-21T02:12:38Z E! [telegraf] Error running agent: Error loading config file /etc/telegraf/telegraf.conf: plugin inputs.smart: line 2329: configuration specified the fields ["endpoint"], but they weren't used telegraf.conf Edited February 21, 2021 by PLAY3R Quote Link to comment
GilbN Posted February 21, 2021 Share Posted February 21, 2021 7 hours ago, PLAY3R said: Help! What am I doing wrong? Thanks fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/main/x86_64/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/v3.12/community/x86_64/APKINDEX.tar.gz v3.12.3-119-gadcf08925b [http://dl-cdn.alpinelinux.org/alpine/v3.12/main] v3.12.3-114-g726dc65b43 [http://dl-cdn.alpinelinux.org/alpine/v3.12/community] OK: 12751 distinct packages available OK: 58 MiB in 36 packages OK: 58 MiB in 36 packages 2021-02-21T02:12:38Z I! Starting Telegraf 1.17.2 2021-02-21T02:12:38Z I! Using config file: /etc/telegraf/telegraf.conf 2021-02-21T02:12:38Z E! [telegraf] Error running agent: Error loading config file /etc/telegraf/telegraf.conf: plugin inputs.smart: line 2329: configuration specified the fields ["endpoint"], but they weren't used telegraf.conf 274.47 kB · 2 downloads You have uncommented the endpoint line in [[inputs.docker_log]] but not uncommented "[[inputs.docker_log]]" Quote Link to comment
PLAY3R Posted February 21, 2021 Share Posted February 21, 2021 Yep, its always something i forget. Thanks, its running now Quote Link to comment
weltern Posted February 23, 2021 Share Posted February 23, 2021 IDK if anyone has done this with their Grafana Dashboard for this yet but I wanted to share it with everyone in case anyone else was curious. There are times when I am not home that I like to check on my server using Grafana and often wondered how I could tell if my UPS was using the AC or the Battery at any given time. I wondered this more so when I knew there was questionable weather near my house. Attached are screenshots of a Query I made that shows you whether or not your UPS is currently using the battery or if it is using the AC power. I'm not particularly good with grafana, I'm still learning, so I don't know if this will work for everyone's setup and UPS but if it does I hope you find it as useful as I do. 1 Quote Link to comment
Gog Posted February 24, 2021 Share Posted February 24, 2021 I must be missing something obvious but is there a way to save the selections in the drive dropdowns? My selections reset every time Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.