I want an direct graphic output to my monitor connected to the pc, where the vm is running.

I already installed the .rom for my graphics card and deleted the part, that is blocking the passthrough.

But then i get the Picture below.

unraid-diagnostics-20200920-2326.zip unraid-syslog-20200920-2127.zip

Might be worth a look here as your sys log is full with thousands of lines of:

Sep 20 14:24:23 Unraid kernel: vfio-pci 0000:01:00.0: BAR 1: can't reserve [mem 0xc0000000-0xcfffffff 64bit pref]

 

 

 

On 9/21/2020 at 5:34 PM, Decto said:

Might be worth a look here as your sys log is full with thousands of lines of: 8 ball pool

 

Sep 20 14:24:23 Unraid kernel: vfio-pci 0000:01:00.0: BAR 1: can't reserve [mem 0xc0000000-0xcfffffff 64bit pref]

 

 

 

Ok, that is clear now. Thank you for your answer.

Edited October 26, 20205 yr by vivaneel

Hey all is anyone able to tell me a soloution to this? i have same issue one minute i can passthrough fine next minute my game crashed now i can start my VM but don't get output from tv any ideas please driving me mental........

 

Oct 5 08:09:37 MovBuster kernel: br0: port 2(vnet0) entered blocking state
Oct 5 08:09:37 MovBuster kernel: br0: port 2(vnet0) entered forwarding state
Oct 5 08:09:38 MovBuster avahi-daemon[10156]: Joining mDNS multicast group on interface vnet0.IPv6 with address fe81::fc55:ff:fe39:50bd.
Oct 5 08:09:38 MovBuster avahi-daemon[10156]: New relevant interface vnet0.IPv6 for mDNS.
Oct 5 08:09:38 MovBuster avahi-daemon[10156]: Registering new address record for fe81::fc55:ff:fe39:50bd on vnet0.*.
Oct 5 08:10:02 MovBuster kernel: vfio-pci 0000:09:00.0: vfio_ecap_init: hiding ecap 0x19@0x900
Oct 5 08:10:02 MovBuster kernel: vfio-pci 0000:09:00.0: No more image in the PCI ROM
Oct 5 08:10:02 MovBuster acpid: input device has been disconnected, fd 9
Oct 5 08:10:02 MovBuster acpid: input device has been disconnected, fd 10
Oct 5 08:10:02 MovBuster acpid: input device has been disconnected, fd 11
Oct 5 08:10:02 MovBuster acpid: input device has been disconnected, fd 6
Oct 5 08:10:02 MovBuster acpid: input device has been disconnected, fd 7
Oct 5 08:10:02 MovBuster acpid: input device has been disconnected, fd 8
Oct 5 08:10:12 MovBuster kernel: usb 3-2: reset full-speed USB device number 2 using xhci_hcd
Oct 5 08:10:12 MovBuster kernel: usb 5-4.1: reset full-speed USB device number 5 using xhci_hcd
Oct 5 08:10:12 MovBuster kernel: usb 5-4.4: reset full-speed USB device number 6 using xhci_hcd
Oct 5 08:10:46 MovBuster avahi-daemon[10156]: Interface vnet0.IPv6 no longer relevant for mDNS.
Oct 5 08:10:46 MovBuster avahi-daemon[10156]: Leaving mDNS multicast group on interface vnet0.IPv6 with address fe81::fc55:ff:fe39:50bd.
Oct 5 08:10:46 MovBuster kernel: br0: port 2(vnet0) entered disabled state
Oct 5 08:10:46 MovBuster kernel: device vnet0 left promiscuous mode
Oct 5 08:10:46 MovBuster kernel: br0: port 2(vnet0) entered disabled state
Oct 5 08:10:46 MovBuster avahi-daemon[10156]: Withdrawing address record for fe81::fc55:ff:fe39:50bd on vnet0.
Oct 5 08:10:46 MovBuster kernel: usb 5-4.4: reset full-speed USB device number 6 using xhci_hcd
Oct 5 08:10:46 MovBuster kernel: usb 5-4.1: reset full-speed USB device number 5 using xhci_hcd
Oct 5 08:10:46 MovBuster kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4.1/5-4.1:1.0/0003:046D:C534.0013/input/input51
Oct 5 08:10:46 MovBuster kernel: hid-generic 0003:046D:C534.0013: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0b:00.3-4.1/input0
Oct 5 08:10:46 MovBuster kernel: input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4.1/5-4.1:1.1/0003:046D:C534.0014/input/input52
Oct 5 08:10:46 MovBuster kernel: input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4.1/5-4.1:1.1/0003:046D:C534.0014/input/input53
Oct 5 08:10:46 MovBuster kernel: input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb5/5-4/5-4.1/5-4.1:1.1/0003:046D:C534.0014/input/input54
Oct 5 08:10:46 MovBuster kernel: hid-generic 0003:046D:C534.0014: input,hiddev97,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0b:00.3-4.1/input1
Oct 5 08:10:46 MovBuster kernel: usb 3-2: reset full-speed USB device number 2 using xhci_hcd
Oct 5 08:10:47 MovBuster kernel: input: Logitech G502 HERO SE as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-2/3-2:1.0/0003:046D:C08B.0015/input/input57
Oct 5 08:10:47 MovBuster kernel: hid-generic 0003:046D:C08B.0015: input,hidraw4: USB HID v1.11 Mouse [Logitech G502 HERO SE] on usb-0000:06:00.3-2/input0
Oct 5 08:10:47 MovBuster kernel: input: Logitech G502 HERO SE Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-2/3-2:1.1/0003:046D:C08B.0016/input/input58
Oct 5 08:10:47 MovBuster kernel: input: Logitech G502 HERO SE Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-2/3-2:1.1/0003:046D:C08B.0016/input/input59
Oct 5 08:10:47 MovBuster kernel: input: Logitech G502 HERO SE System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-2/3-2:1.1/0003:046D:C08B.0016/input/input60
Oct 5 08:10:47 MovBuster kernel: hid-generic 0003:046D:C08B.0016: input,hiddev99,hidraw5: USB HID v1.11 Keyboard [Logitech G502 HERO SE] on usb-0000:06:00.3-2/input1
Oct 5 08:10:48 MovBuster kernel: vfio-pci 0000:09:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem

Edited October 5, 20205 yr by Dava2k7