linuxserver.io Posted September 27, 2020 Share Posted September 27, 2020 (edited) As off June 13, 2022 this image has been deprecated, read the notice here https://info.linuxserver.io/issues/2022-06-13-scrutiny/ Application Name: Scrutiny Application Site: https://github.com/AnalogJ/scrutiny Docker Hub: https://hub.docker.com/r/linuxserver/scrutiny/ Github: https://github.com/linuxserver/docker-scrutiny Please post any questions/issues relating to this docker you have in this thread. If you are not using Unraid (and you should be!) then please do not post here, rather use the linuxserver.io forum for support. Edited June 13, 2022 by linuxserver.io 1 Quote Link to comment
sonic6 Posted September 27, 2020 Share Posted September 27, 2020 i can't install the docker, till i delete the ":ro" from "UDEV: /run/udev:ro" Quote Link to comment
ndetar Posted September 27, 2020 Share Posted September 27, 2020 (edited) I also had to remove the ":ro" from UDEV. However, I also have an issue where only 4 of my drives are showing up on the dashboard. Edit: I have two controllers in my server and it looks like only the drives connected directly to the motherboard are showing up on the dashboard. Edited September 27, 2020 by ndetar Quote Link to comment
abhi.ko Posted September 27, 2020 Share Posted September 27, 2020 (edited) I have it installed - but all disks show up with no data. What should it do to get the SMART data populated? Edited September 27, 2020 by abhi.ko Addec screenshot Quote Link to comment
Squid Posted September 27, 2020 Share Posted September 27, 2020 44 minutes ago, abhi.ko said: I have it installed - but all disks show up with no data. What should it do to get the SMART data populated? Try going into the shell (click on it's icon, and select shell) then run scrutiny-collector-metrics run Quote Link to comment
abhi.ko Posted September 27, 2020 Share Posted September 27, 2020 (edited) Thanks! That worked, but I only have metrics for sdb-sdg. What about the rest of the drives? How do I get those? Edited September 27, 2020 by abhi.ko Quote Link to comment
sonic6 Posted September 27, 2020 Share Posted September 27, 2020 at this time i can find 3 versions from scrutiny in the Community Application. What are the difference and which one should i use? Quote Link to comment
saarg Posted September 27, 2020 Share Posted September 27, 2020 3 hours ago, sonic6 said: i can't install the docker, till i delete the ":ro" from "UDEV: /run/udev:ro" 2 hours ago, ndetar said: I also had to remove the ":ro" from UDEV. However, I also have an issue where only 4 of my drives are showing up on the dashboard. Edit: I have two controllers in my server and it looks like only the drives connected directly to the motherboard are showing up on the dashboard. That was my bad. It's fixed now. 1 Quote Link to comment
DarphBobo Posted September 27, 2020 Share Posted September 27, 2020 23 minutes ago, sonic6 said: which one should i use? Based upon where you've posted the question, the answer will probably be the linuxserver version... Quote Link to comment
sonic6 Posted September 27, 2020 Share Posted September 27, 2020 okay, you are right... this question was dumb, but what are the difference to the other versions? Quote Link to comment
Squid Posted September 28, 2020 Share Posted September 28, 2020 All OT discussion regarding this has been moved to the lounge Quote Link to comment
tallguydirk Posted September 29, 2020 Share Posted September 29, 2020 I am not able to see any of the drives behind my 3ware controller. INFO[0003] Publishing smartctl results for type=metrics INFO[0003] Collecting smartctl results for sdaa type=metrics INFO[0003] Executing command: smartctl -x -j /dev/sdaa type=metrics { "json_format_version": [ 1, 0 ], "smartctl": { "version": [ 7, 1 ], "svn_revision": "5022", "platform_info": "x86_64-linux-4.19.107-Unraid", "build_info": "(local build)", "argv": [ "smartctl", "-x", "-j", "/dev/sdaa" ], "messages": [ { "string": "Smartctl open device: /dev/sdaa failed: AMCC/3ware controller, please try adding '-d 3ware,N',", "severity": "error" }, { "string": "you may need to replace /dev/sdaa with /dev/twlN, /dev/twaN or /dev/tweN", "severity": "error" } ], "exit_status": 2 } } ERRO[0003] smartctl returned an error code (2) while processing sdaa type=metrics ERRO[0003] smartctl could not open device type=metrics INFO[0003] Publishing smartctl results for type=metrics INFO[0003] Main: Completed type=metrics Quote Link to comment
hernandito Posted September 29, 2020 Share Posted September 29, 2020 I wish there was a way to enter custom display data for each of your drives... Just seeing /dev/sdb is not informative enough. You should be able to give the disk a custom name, and to display things like the serial number... stuff displayed on the Main tab in our beloved GUI. Also... how does one initiate a new scan of the drive(s)? That could be a button. Thanks for making the Docker guys! 1 Quote Link to comment
CoZ Posted September 30, 2020 Share Posted September 30, 2020 Well I got this error message when I ran the "scrutiny-collector-metrics run" in the dockers CLI: 2020/09/29 23:13:22 ERROR: Post http://localhost:8080/api/devices/register: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) I changed the WebUI port to 8085 but other than that, everything was left 'default'. Any ideas? Quote Link to comment
Pducharme Posted September 30, 2020 Share Posted September 30, 2020 Is there a second part I need to install to have this working? I only see this in the WEB UI. When trying the command mentioned, it cannot find the command. Quote Link to comment
Zotarios Posted September 30, 2020 Share Posted September 30, 2020 22 minutes ago, Pducharme said: it cannot find the command. Are you running the command on unRAID terminal or the docker console? Quote Link to comment
cagemaster Posted September 30, 2020 Share Posted September 30, 2020 I'm also trying and can not get this to work. Container settings: Run the command: yaml file: What should i do more? Quote Link to comment
Pducharme Posted September 30, 2020 Share Posted September 30, 2020 Got it working, I was running the command on the Unraid Terminal instead of the Docker's terminal 😮 Look great. Will that run automatically periodically or I'll have to run the command manually each time I want most newest data ? Quote Link to comment
cagemaster Posted September 30, 2020 Share Posted September 30, 2020 (edited) 1 minute ago, Pducharme said: Got it working, I was running the command on the Unraid Terminal instead of the Docker's terminal 😮 Look great. Will that run automatically periodically or I'll have to run the command manually each time I want most newest data ? I read somewhere that that command runs once every day. Link to quote: https://github.com/AnalogJ/scrutiny#usage Edited September 30, 2020 by cagemaster Quote Link to comment
Pducharme Posted September 30, 2020 Share Posted September 30, 2020 @cagemaster thanks. Quote Link to comment
cagemaster Posted September 30, 2020 Share Posted September 30, 2020 (edited) 1 minute ago, Pducharme said: @cagemaster thanks. How'd you make it work? Because it's not working for me. Edited September 30, 2020 by cagemaster Quote Link to comment
Zotarios Posted September 30, 2020 Share Posted September 30, 2020 2 minutes ago, cagemaster said: I read somewhere that that command runs once every day. Yep! Quote Link to comment
Pducharme Posted September 30, 2020 Share Posted September 30, 2020 1 minute ago, cagemaster said: How'd you make it work? Because it's not working for me. I only opened a "Terminal" on the scrutinity docker, then run the scrutinity-collector-metrics run command. After that, It ran than the WEB UI was populated with my 16 drives + NVMe drive. Quote Link to comment
cagemaster Posted September 30, 2020 Share Posted September 30, 2020 Just now, Pducharme said: I only opened a "Terminal" on the scrutinity docker, then run the scrutinity-collector-metrics run command. After that, It ran than the WEB UI was populated with my 16 drives + NVMe drive. Hmm.. That was literally the first thing i tried. Quote Link to comment
Pducharme Posted September 30, 2020 Share Posted September 30, 2020 Just now, cagemaster said: Hmm.. That was literally the first thing i tried. I suppose there is some bugs or your system has something special that make it not working. Maybe the dev will find a fix! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.