October 1, 20205 yr Hello, I have a new Unraid instance I have setup on a Dell r620 (10x 1TB drives). I find all the drives fine, however it will not find the network. The server has both a IPMI Motherboard port as well as a 4 port 10Gb card - I am assuming the issue is with the Port bonding settings, however - being new to unraid, I am not familiar with how I should properly configure it. Any advice would be appreciated. Fix: for r620 servers - make sure you are running bios 2.9.0, also depending on the riser card installed, disable port bonding. Edited October 1, 20205 yr by iwearshoes
October 1, 20205 yr Community Expert Please post the diagnostics, you can get them by typing "diagnostics" on the console.
October 1, 20205 yr Author I actually figured out the fix, had to update the bios and it worked on the riser card ports. I am having some other issues, but I will start a new thread for those. Thank you for your reply! Edited October 1, 20205 yr by iwearshoes
Archived
This topic is now archived and is closed to further replies.