Hello everyone- 

 

I just logged into my server after quite a bit of time of just letting it run (Yay for stability) and I noticed that one of my drives is showing Disabled. I started doing some digging to see if I could figure out what the issue is, but last time I got this deep I ended up losing a ton of data. 

 

I have attached a copy of the diagnostics would one of you awesome people be willing to take a look and help me out? 

 

Thanks a bunch

unraid-diagnostics-20201006-1137.zip

1 minute ago, heystek said:

logged into my server after quite a bit of time of just letting it run (Yay for stability) and I noticed

You shouldn't have to login to know you have a problem. Setup Notifications to alert you immediately by email or other agent as soon as a problem is detected. Don't let one unnoticed problem become multiple problems and data loss. 

 

On mobile now will look at Diagnostics later. 

Diags are after rebooting so we can't see what happened, disk look fine, replace/swap cables to rule them out and rebuild.

 

Also, the docker image is corrupt and needs to be recreated, and like trurl mentioned make sure you enable system notifications.

Thank you for the replies. I did have notifications set up with PushBullet, but I never had any error come across about a disk issue at least that I noticed (I do have notifications turned on for Sonarr/Radarr and may be been lost in a batch). 

 

My UnRaid server is in a Dell PE R510 with the disk bays in front.  I can try sliding the disk out and back in to see if maybe the connect rattled loose. 

 

What is the proper way to rebuild?

 

I truly appreciate all the help!

 

Edit: I went through PushBullet and on Sep 15 10:41 I did receive and alert "Alert [UNRAID] - Disk 6 in error state [disk dsbl] so it does look like it alerted me and I missed it. *DOH*

Edited October 6, 20205 yr by heystek
More info

5 minutes ago, heystek said:

I can try sliding the disk out and back in to see if maybe the connect rattled loose. 

Use a different slot if available.

 

5 minutes ago, heystek said:

What is the proper way to rebuild?

https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive

Thanks @JorgeB I just started the rebuild. Hopefully that get me back and running. Should I play it safe and wait for the array to rebuild before messing with rebuilding the Docker image? 

It's OK to do it now, it's not a heavy operation.

1 hour ago, heystek said:

rebuilding the Docker image

Do you know how? 

@trurl Yup! That one I have had to do before. 

 

Thanks to you both for the help!

Update: Ran the rebuild, deleted and recreated the docker image and now I am up and working 100%. Thanks a bunch for the help!