Hello everyone. I am new here and I just put together my Unraid NAS. Got the following error. It's a brand new drive.

ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 155 hours (6 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 53 d8 07 cc 1d 40 Error: ICRC, ABRT 216 sectors at LBA = 0x001dcc07 = 1952775 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 e8 f8 cb 1d e0 08 17:34:21.516 READ DMA EXT 47 00 01 12 00 00 a0 08 17:33:23.930 READ LOG DMA EXT 47 00 01 00 00 00 a0 08 17:33:23.914 READ LOG DMA EXT 47 00 01 13 00 00 a0 08 17:33:23.885 READ LOG DMA EXT 47 00 01 00 00 00 a0 08 17:33:23.856 READ LOG DMA EXT

 

Can someone tell me what this error means and if I should be worried?

You should post a diagnostics report.