Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

[SOLVED] Disk in error state (disk dsbl) and mandatory smart command failed

Featured Replies

Hello,

 

Server was scheduled today for parity check, and from what is shown the check did not finish as disk 2 had read errors then was disabled. First time having a disabled disk, not sure what is the next step.

 

Thank you and appreciate the help

 

Edited by iilied

Disk2 dropped offline, so there's no SMART, check connections and post new diags.

  • Author
19 hours ago, JorgeB said:

Disk2 dropped offline, so there's no SMART, check connections and post new diags.

all connections look good, the udma crc errors are old and the cables have been changed since then.

 

Edited by iilied

Those diags are the same, or the disk is still offline, if you don't want to check connections you need to at least power cycle the server to see if it comes back online.

  • Author
5 minutes ago, JorgeB said:

Those diags are the same, or the disk is still offline, if you don't want to check connections you need to at least power cycle the server to see if it comes back online.

the server was shut down and the connections were checked again, they are good. powered back the server again, but the disk is still disabled and did not start the array yet. should i start the array and see what happens or what exactly to do here?

Disk disable is normal, the question is if it came back online, post new diags.

  • Author
18 hours ago, JorgeB said:

Disk disable is normal, the question is if it came back online, post new diags.

that was very stupid of me, did not notice that the same diags were uploaded. my bad.

attached are the one that was supposed to be uploaded in the previous post, and another latest one.

 

 

Edited by iilied

  • Author

should be built and ready in about 6 hours

thanks @JorgeB 

 

Edited by iilied

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.