iilied Posted October 15, 2020 Share Posted October 15, 2020 (edited) Hello, Server was scheduled today for parity check, and from what is shown the check did not finish as disk 2 had read errors then was disabled. First time having a disabled disk, not sure what is the next step. Thank you and appreciate the help Edited October 16, 2020 by iilied Quote Link to comment
JorgeB Posted October 15, 2020 Share Posted October 15, 2020 Disk2 dropped offline, so there's no SMART, check connections and post new diags. Quote Link to comment
iilied Posted October 15, 2020 Author Share Posted October 15, 2020 (edited) 19 hours ago, JorgeB said: Disk2 dropped offline, so there's no SMART, check connections and post new diags. all connections look good, the udma crc errors are old and the cables have been changed since then. Edited October 16, 2020 by iilied Quote Link to comment
JorgeB Posted October 15, 2020 Share Posted October 15, 2020 Those diags are the same, or the disk is still offline, if you don't want to check connections you need to at least power cycle the server to see if it comes back online. Quote Link to comment
iilied Posted October 15, 2020 Author Share Posted October 15, 2020 5 minutes ago, JorgeB said: Those diags are the same, or the disk is still offline, if you don't want to check connections you need to at least power cycle the server to see if it comes back online. the server was shut down and the connections were checked again, they are good. powered back the server again, but the disk is still disabled and did not start the array yet. should i start the array and see what happens or what exactly to do here? Quote Link to comment
JorgeB Posted October 15, 2020 Share Posted October 15, 2020 Disk disable is normal, the question is if it came back online, post new diags. Quote Link to comment
iilied Posted October 15, 2020 Author Share Posted October 15, 2020 (edited) 18 hours ago, JorgeB said: Disk disable is normal, the question is if it came back online, post new diags. that was very stupid of me, did not notice that the same diags were uploaded. my bad. attached are the one that was supposed to be uploaded in the previous post, and another latest one. Edited October 16, 2020 by iilied Quote Link to comment
JorgeB Posted October 15, 2020 Share Posted October 15, 2020 Disk looks healthy, most likely a power/connection issue, if you already replaced/checked them you can rebuild on top, but start the array and make sure the emulated disk mounts and contents looks correct before doing it. https://wiki.unraid.net/Troubleshooting#Re-enable_the_drive Quote Link to comment
iilied Posted October 15, 2020 Author Share Posted October 15, 2020 (edited) should be built and ready in about 6 hours thanks @JorgeB Edited October 16, 2020 by iilied 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.