Problem after I enabled SLL and removed it again?


Recommended Posts

Hi All

 

For a very long time I had problems using the Unraid certf. on a UNIFI router and I had to make these changes:

 

After that I only used my local IP address after that!

But by mistake I enabled SLL and I did remove it afterwards in the file ident.cfg file

 

# Generated settings:
NAME="PLEXZONE"
timeZone="Europe/Paris"
COMMENT="The Ultimate Media Server"
SECURITY="user"
WORKGROUP="WORKGROUP"
DOMAIN=""
DOMAIN_SHORT=""
hideDotFiles="no"
localMaster="yes"
enableFruit="no"
USE_NETBIOS="yes"
USE_WSD="yes"
WSD_OPT=""
USE_NTP="yes"
NTP_SERVER1="time1.google.com"
NTP_SERVER2="time2.google.com"
NTP_SERVER3="time3.google.com"
NTP_SERVER4="time4.google.com"
DOMAIN_LOGIN="Administrator"
DOMAIN_PASSWD=""
SYS_MODEL="Xeon E-2100G based 24-bay NAS system"
SYS_ARRAY_SLOTS="24"
SYS_CACHE_SLOTS="1"
USE_SSL="no"
PORT="80"
PORTSSL="443"
LOCAL_TLD="local"
BIND_MGT="no"
USE_TELNET="yes"
PORTTELNET="23"
USE_SSH="yes"
PORTSSH="22"
USE_UPNP="no"
START_PAGE="Main"

# Generated settings:
NAME="Tower"
timeZone="Europe/Paris"
COMMENT="The Ultimate Media Server"
SECURITY="user"
WORKGROUP="WORKGROUP"
DOMAIN=""
DOMAIN_SHORT=""
hideDotFiles="no"
localMaster="yes"
enableFruit="no"
USE_NETBIOS="yes"
USE_WSD="yes"
WSD_OPT=""
USE_NTP="yes"
NTP_SERVER1="time1.google.com"
NTP_SERVER2="time2.google.com"
NTP_SERVER3="time3.google.com"
NTP_SERVER4="time4.google.com"
DOMAIN_LOGIN="Administrator"
DOMAIN_PASSWD=""
SYS_MODEL="Xeon E-2100G based 24-bay NAS system"
SYS_ARRAY_SLOTS="24"
SYS_CACHE_SLOTS="1"
USE_SSL="no"   <------- ok?
PORT="80"
PORTSSL="443"
LOCAL_TLD="local"
BIND_MGT="no"
USE_TELNET="yes"
PORTTELNET="23"
USE_SSH="yes"
PORTSSH="22"
USE_UPNP="no"
START_PAGE="Main"

I also removed any certificate in the folder: \flash\config\ssl

(I have a SWAG/Lets encrypt docker running using port 443 so I guess that would also interfere with the auto creation of a temp Unraid certificate?)

 

But how do I re-enable connection by IP to my server without rebooting the server?

No matter what I do now right now it will translate my local IP to a Servername.local that breaks my access to the server?

 

I cant remember what I need to do? Very long time ago, I removed this with the help of Limetech support because I couldnt connect to my server

 

My GO file is like this:

#!/bin/bash
# Start the Management Utility
/usr/local/sbin/emhttp &

#Setup drivers for iGPU hardware transcoding in Plex
modprobe i915
chown -R nobody:users /dev/dri
chmod -R 777 /dev/dri

And in my Ident menu I dont have any http/Sll options available

I have tried googling and reading the forum post but so far no luck

 

 

 

 

 

 

 

 

 

 

 

 

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.