October 30, 2025Oct 30 Good morning,It turns out I'm having trouble getting my Coral M.2 Accelerator A+E key to work. It used to work perfectly through an M.2 adapter, but now that I’ve changed the motherboard (due to a warranty issue), I can’t get it to work anymore.Here are the details of the change:Previously, I had this motherboard:cwwkCWWK N100/i3-N305 six-bay NAS monster board/4x 2.5G/6x SA...CWWK is committed to developing a reliable, secure, and customizable firewall or VPN appliance for network professionals and enthusiasts.And now I’ve switched to this one:https://cwwk.net/collections/nas/products/cwwk-eight-slot-10g-nas-motherboard-n150-n305-n355-dual-2-5g-network-card-10g-10g-port-single-ddr5-dual-nvme-nas-motherboardThe new board has an M.2 E-Key PCIe & CNVi Wi-Fi socket (I’m not sure if it’s supposed to work there).I’ve tried both that connector and the M.2 slot with the adapter I already had, but neither works — I get the error:“No PCI-based Coral TPU found!”I’m attaching pictures of everything.Thanks! Edited October 30, 2025Oct 30 by Lerk
October 30, 2025Oct 30 Author 5 hours ago, Lerk said:Good morning,It turns out I'm having trouble getting my Coral M.2 Accelerator A+E key to work. It used to work perfectly through an M.2 adapter, but now that I’ve changed the motherboard (due to a warranty issue), I can’t get it to work anymore.Here are the details of the change:Previously, I had this motherboard:cwwkCWWK N100/i3-N305 six-bay NAS monster board/4x 2.5G/6x SA...CWWK is committed to developing a reliable, secure, and customizable firewall or VPN appliance for network professionals and enthusiasts.And now I’ve switched to this one:https://cwwk.net/collections/nas/products/cwwk-eight-slot-10g-nas-motherboard-n150-n305-n355-dual-2-5g-network-card-10g-10g-port-single-ddr5-dual-nvme-nas-motherboardThe new board has an M.2 E-Key PCIe & CNVi Wi-Fi socket (I’m not sure if it’s supposed to work there).I’ve tried both that connector and the M.2 slot with the adapter I already had, but neither works — I get the error:“No PCI-based Coral TPU found!”I’m attaching pictures of everything.Thanks!Did you try to unisntall the plugin and install it again?
October 30, 2025Oct 30 33 minutes ago, yayitazale said:Did you try to unisntall the plugin and install it again?Yes.The only difference (not sure if this is expected) is that the repository is from Limetech. As far as I understand, it’s the official one and the same I’ve successfully used before.I’ll need to check if there’s an option in the BIOS to enable PCIe/CVNI.
November 2, 2025Nov 2 Recently replaced my Coral A+E m.2 TPU with a Hailo-8L B+M m.2 TPU, which has made Frigate stable, with the TPU itself never going offline in the weeks since. However, today I noticed the following error keeps popping up associated with the kernel, such that when it does it happens numerous times that day, but then it won't happen for at least a week or so. Is this a concern?Log excerpt hereNov 2 09:47:26 server kernel: ------------[ cut here ]------------ Nov 2 09:47:26 server kernel: WARNING: CPU: 2 PID: 2683488 at include/linux/rwsem.h:80 find_vma+0x29/0x60 Nov 2 09:47:26 server kernel: Modules linked in: xt_connmark iptable_mangle xt_comment iptable_raw wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha udp_diag nft_masq nft_chain_nat nf_conntrack_netlink xt_nat veth xt_conntrack xfrm_user xfrm_algo xt_addrtype dm_crypt dm_mod hailo_pci(O) md_mod zfs(PO) spl(O) xt_MASQUERADE xt_tcpudp xt_mark tun nf_tables nfnetlink ip6table_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ntfs3 tcp_diag inet_diag nct6775 nct6775_core hwmon_vid apex(O) gasket(O) ip6table_filter ip6_tables iptable_filter ip_tables x_tables efivarfs bridge stp llc bonding tls intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel i915 kvm iosf_mbi drm_buddy ttm i2c_algo_bit drm_display_helper drm_kms_helper crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 sha256_ssse3 drm sha1_ssse3 aesni_intel crypto_simd cryptd rapl mei_hdcp mei_pxp wmi_bmof intel_wmi_thunderbolt nvme Nov 2 09:47:26 server kernel: i2c_i801 intel_gtt intel_cstate intel_uncore e1000e i2c_smbus agpgart nvme_core mei_me mei ahci i2c_core libahci intel_pch_thermal video wmi backlight acpi_tad acpi_pad button Nov 2 09:47:26 server kernel: CPU: 2 UID: 0 PID: 2683488 Comm: frigate.detecto Tainted: P W O 6.12.24-Unraid #1 Nov 2 09:47:26 server kernel: Tainted: [P]=PROPRIETARY_MODULE, [W]=WARN, [O]=OOT_MODULE Nov 2 09:47:26 server kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z390 Pro4, BIOS P4.70 01/20/2021 Nov 2 09:47:26 server kernel: RIP: 0010:find_vma+0x29/0x60 Nov 2 09:47:26 server kernel: Code: 90 0f 1f 44 00 00 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 48 89 34 24 48 8b 87 a8 00 00 00 48 85 c0 75 02 <0f> 0b 48 83 c7 40 48 83 ca ff 48 89 e6 e8 b5 a6 88 00 48 8b 54 24 Nov 2 09:47:26 server kernel: RSP: 0018:ffffc90024547da8 EFLAGS: 00010246 Nov 2 09:47:26 server kernel: RAX: 0000000000000000 RBX: ffff8881ac335600 RCX: 0000000000000080 Nov 2 09:47:26 server kernel: RDX: 0000000000000070 RSI: 0000148f839e0000 RDI: ffff8881f8bc7900 Nov 2 09:47:26 server kernel: RBP: ffffc90024547e38 R08: 0000000000000dc0 R09: 00000000ffffffff Nov 2 09:47:26 server kernel: R10: ffff88817ba392f8 R11: 0000148fcc9fb5c0 R12: 0000000000000000 Nov 2 09:47:26 server kernel: R13: 0000148fcc9fb5c0 R14: ffff8881bcdf1100 R15: 0000000000000000 Nov 2 09:47:26 server kernel: FS: 0000148fcc9fd6c0(0000) GS:ffff88884e080000(0000) knlGS:0000000000000000 Nov 2 09:47:26 server kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 2 09:47:26 server kernel: CR2: 0000148fa8153028 CR3: 000000045a59e005 CR4: 00000000003726f0 Nov 2 09:47:26 server kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Nov 2 09:47:26 server kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Nov 2 09:47:26 server kernel: Call Trace: Nov 2 09:47:26 server kernel: <TASK> Nov 2 09:47:26 server kernel: hailo_vdma_buffer_map+0xa0/0x590 [hailo_pci] Nov 2 09:47:26 server kernel: hailo_vdma_buffer_map_ioctl+0x10b/0x210 [hailo_pci] Nov 2 09:47:26 server kernel: hailo_pcie_fops_unlockedioctl+0x1ed/0x5b0 [hailo_pci] Nov 2 09:47:26 server kernel: vfs_ioctl+0x1b/0x30 Nov 2 09:47:26 server kernel: __do_sys_ioctl+0x52/0x80 Nov 2 09:47:26 server kernel: do_syscall_64+0x68/0xe0 Nov 2 09:47:26 server kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e Nov 2 09:47:26 server kernel: RIP: 0033:0x148fd1fc3d5b Nov 2 09:47:26 server kernel: Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00 Nov 2 09:47:26 server kernel: RSP: 002b:0000148fcc9fb510 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 Nov 2 09:47:26 server kernel: RAX: ffffffffffffffda RBX: 0000148fcc9fb810 RCX: 0000148fd1fc3d5b Nov 2 09:47:26 server kernel: RDX: 0000148fcc9fb5c0 RSI: 00000000c0287604 RDI: 0000000000000057 Nov 2 09:47:26 server kernel: RBP: 0000000004e98380 R08: 0000000000000001 R09: 0000000000000000 Nov 2 09:47:26 server kernel: R10: 0000000000001900 R11: 0000000000000246 R12: 0000000004e98410 Nov 2 09:47:26 server kernel: R13: 0000000004e98438 R14: 0000148f839e0000 R15: 0000000004e98380 Nov 2 09:47:26 server kernel: </TASK> Edited November 2, 2025Nov 2 by john_smith
November 4, 2025Nov 4 Author On 11/2/2025 at 6:58 PM, john_smith said:Recently replaced my Coral A+E m.2 TPU with a Hailo-8L B+M m.2 TPU, which has made Frigate stable, with the TPU itself never going offline in the weeks since. However, today I noticed the following error keeps popping up associated with the kernel, such that when it does it happens numerous times that day, but then it won't happen for at least a week or so. Is this a concern?Log excerpt hereNov 2 09:47:26 server kernel: ------------[ cut here ]------------ Nov 2 09:47:26 server kernel: WARNING: CPU: 2 PID: 2683488 at include/linux/rwsem.h:80 find_vma+0x29/0x60 Nov 2 09:47:26 server kernel: Modules linked in: xt_connmark iptable_mangle xt_comment iptable_raw wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha udp_diag nft_masq nft_chain_nat nf_conntrack_netlink xt_nat veth xt_conntrack xfrm_user xfrm_algo xt_addrtype dm_crypt dm_mod hailo_pci(O) md_mod zfs(PO) spl(O) xt_MASQUERADE xt_tcpudp xt_mark tun nf_tables nfnetlink ip6table_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ntfs3 tcp_diag inet_diag nct6775 nct6775_core hwmon_vid apex(O) gasket(O) ip6table_filter ip6_tables iptable_filter ip_tables x_tables efivarfs bridge stp llc bonding tls intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel i915 kvm iosf_mbi drm_buddy ttm i2c_algo_bit drm_display_helper drm_kms_helper crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha512_ssse3 sha256_ssse3 drm sha1_ssse3 aesni_intel crypto_simd cryptd rapl mei_hdcp mei_pxp wmi_bmof intel_wmi_thunderbolt nvme Nov 2 09:47:26 server kernel: i2c_i801 intel_gtt intel_cstate intel_uncore e1000e i2c_smbus agpgart nvme_core mei_me mei ahci i2c_core libahci intel_pch_thermal video wmi backlight acpi_tad acpi_pad button Nov 2 09:47:26 server kernel: CPU: 2 UID: 0 PID: 2683488 Comm: frigate.detecto Tainted: P W O 6.12.24-Unraid #1 Nov 2 09:47:26 server kernel: Tainted: [P]=PROPRIETARY_MODULE, [W]=WARN, [O]=OOT_MODULE Nov 2 09:47:26 server kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z390 Pro4, BIOS P4.70 01/20/2021 Nov 2 09:47:26 server kernel: RIP: 0010:find_vma+0x29/0x60 Nov 2 09:47:26 server kernel: Code: 90 0f 1f 44 00 00 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 48 89 34 24 48 8b 87 a8 00 00 00 48 85 c0 75 02 <0f> 0b 48 83 c7 40 48 83 ca ff 48 89 e6 e8 b5 a6 88 00 48 8b 54 24 Nov 2 09:47:26 server kernel: RSP: 0018:ffffc90024547da8 EFLAGS: 00010246 Nov 2 09:47:26 server kernel: RAX: 0000000000000000 RBX: ffff8881ac335600 RCX: 0000000000000080 Nov 2 09:47:26 server kernel: RDX: 0000000000000070 RSI: 0000148f839e0000 RDI: ffff8881f8bc7900 Nov 2 09:47:26 server kernel: RBP: ffffc90024547e38 R08: 0000000000000dc0 R09: 00000000ffffffff Nov 2 09:47:26 server kernel: R10: ffff88817ba392f8 R11: 0000148fcc9fb5c0 R12: 0000000000000000 Nov 2 09:47:26 server kernel: R13: 0000148fcc9fb5c0 R14: ffff8881bcdf1100 R15: 0000000000000000 Nov 2 09:47:26 server kernel: FS: 0000148fcc9fd6c0(0000) GS:ffff88884e080000(0000) knlGS:0000000000000000 Nov 2 09:47:26 server kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 2 09:47:26 server kernel: CR2: 0000148fa8153028 CR3: 000000045a59e005 CR4: 00000000003726f0 Nov 2 09:47:26 server kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Nov 2 09:47:26 server kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Nov 2 09:47:26 server kernel: Call Trace: Nov 2 09:47:26 server kernel: <TASK> Nov 2 09:47:26 server kernel: hailo_vdma_buffer_map+0xa0/0x590 [hailo_pci] Nov 2 09:47:26 server kernel: hailo_vdma_buffer_map_ioctl+0x10b/0x210 [hailo_pci] Nov 2 09:47:26 server kernel: hailo_pcie_fops_unlockedioctl+0x1ed/0x5b0 [hailo_pci] Nov 2 09:47:26 server kernel: vfs_ioctl+0x1b/0x30 Nov 2 09:47:26 server kernel: __do_sys_ioctl+0x52/0x80 Nov 2 09:47:26 server kernel: do_syscall_64+0x68/0xe0 Nov 2 09:47:26 server kernel: entry_SYSCALL_64_after_hwframe+0x76/0x7e Nov 2 09:47:26 server kernel: RIP: 0033:0x148fd1fc3d5b Nov 2 09:47:26 server kernel: Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00 Nov 2 09:47:26 server kernel: RSP: 002b:0000148fcc9fb510 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 Nov 2 09:47:26 server kernel: RAX: ffffffffffffffda RBX: 0000148fcc9fb810 RCX: 0000148fd1fc3d5b Nov 2 09:47:26 server kernel: RDX: 0000148fcc9fb5c0 RSI: 00000000c0287604 RDI: 0000000000000057 Nov 2 09:47:26 server kernel: RBP: 0000000004e98380 R08: 0000000000000001 R09: 0000000000000000 Nov 2 09:47:26 server kernel: R10: 0000000000001900 R11: 0000000000000246 R12: 0000000004e98410 Nov 2 09:47:26 server kernel: R13: 0000000004e98438 R14: 0000148f839e0000 R15: 0000000004e98380 Nov 2 09:47:26 server kernel: </TASK>There is a open discussion for this issue:https://github.com/blakeblackshear/frigate/discussions/18850#discussioncomment-14717742
November 4, 2025Nov 4 2 hours ago, yayitazale said:There is a open discussion for this issue:https://github.com/blakeblackshear/frigate/discussions/18850#discussioncomment-14717742If they're harmless, why are the messages coming up?
December 2, 2025Dec 2 Looks like Google Coral TPU can run YOLO v9 object detection models. I didnt get it to work, but i think it is more related to unraid and where to place the models. Maybe someone else has more luck: https://github.com/dbro/frigate-detector-edgetpu-yolo9On reddit several guys confirmed that is working.
December 3, 2025Dec 3 Author 13 hours ago, sylus said:Looks like Google Coral TPU can run YOLO v9 object detection models. I didnt get it to work, but i think it is more related to unraid and where to place the models. Maybe someone else has more luck: https://github.com/dbro/frigate-detector-edgetpu-yolo9On reddit several guys confirmed that is working.I wasn't aware of this, but since the Merge request has already been accepted, I assume this option will be released as a feature in the next version. Just be patient.
January 4Jan 4 Can someone please point this noob in the right direction? I've bought two Tapo c110 cameras and wanted to integrate them into my unraid server. I've setup Frigate through the community applications and got my two cameras working through rtsp. All great. Then I set up mosquitto and tried to link it to Frigate and my Home Assistant docker container for notifications. I did not get this to work. After trying for a while I found out that there's a blueprint for HA. But this blueprint requires a frigate add on in HA installed through HACS. HA on Unraid doesn't have HACS and now I'm stuck. Can someone point me in the right direction?
January 4Jan 4 12 minutes ago, ontosan said:Can someone please point this noob in the right direction? I've bought two Tapo c110 cameras and wanted to integrate them into my unraid server. I've setup Frigate through the community applications and got my two cameras working through rtsp. All great. Then I set up mosquitto and tried to link it to Frigate and my Home Assistant docker container for notifications. I did not get this to work. After trying for a while I found out that there's a blueprint for HA. But this blueprint requires a frigate add on in HA installed through HACS. HA on Unraid doesn't have HACS and now I'm stuck. Can someone point me in the right direction?You didn’t provide many details about how you are running HA on Unraid but the HACS docs cover multiple install methods for different scenarios.https://www.hacs.xyz/docs/use/download/download/#to-download-hacs
January 5Jan 5 22 hours ago, wgstarks said:You didn’t provide many details about how you are running HA on Unraid but the HACS docs cover multiple install methods for different scenarios.https://www.hacs.xyz/docs/use/download/download/#to-download-hacsExactly the nudge I needed, I found the HA docs and the Frigate docs but didn't look for HACS docs. Thanks so much, it works! And to be fair, I did mention I run HA as a docker container in Unraid :-) Edited January 5Jan 5 by ontosan
January 5Jan 5 3 minutes ago, ontosan said:to be fair, I did mention I run HA as a docker container in Unraid :-)Yeah, apologies. I just missed it.😊
January 6Jan 6 Hi guys, very sorry if this is a stupid request butr for the love no money can i get Frigate installed on my Unraid server.Now i download through the apps and leave everything on default apart from deleting the Coral and Nvidia stuff it then installs. I have to click logs quick to get the username and password which it nevers gives, and i have tried more than 10 times to install and delete with different settings in the install part.I have looked online for guides (idiot proof ones) and videos with out any success.Could anybody help a noob out please as im loosing the will to live....
January 7Jan 7 20 hours ago, xtremedetailz said:Hi guys, very sorry if this is a stupid request butr for the love no money can i get Frigate installed on my Unraid server.Now i download through the apps and leave everything on default apart from deleting the Coral and Nvidia stuff it then installs.I have to click logs quick to get the username and password which it nevers gives, and i have tried more than 10 times to install and delete with different settings in the install part.I have looked online for guides (idiot proof ones) and videos with out any success.Could anybody help a noob out please as im loosing the will to live....Have you added a config.yml file in your Frigate folder, usally /mnt/user/appdata/frigate?
January 7Jan 7 Author On 1/6/2026 at 5:46 PM, xtremedetailz said:Hi guys, very sorry if this is a stupid request butr for the love no money can i get Frigate installed on my Unraid server.Now i download through the apps and leave everything on default apart from deleting the Coral and Nvidia stuff it then installs.I have to click logs quick to get the username and password which it nevers gives, and i have tried more than 10 times to install and delete with different settings in the install part.I have looked online for guides (idiot proof ones) and videos with out any success.Could anybody help a noob out please as im loosing the will to live....Please give us some info. Copy and paste de error logs for example
January 7Jan 7 5 hours ago, flosken said:Have you added a config.yml file in your Frigate folder, usally /mnt/user/appdata/frigate?52 minutes ago, yayitazale said:Please give us some info. Copy and paste de error logs for exampleOk guys i have now got it installed and can log in and even find a camera. (had to set static ip i think in the camera)Now the cameras i have are hikvision 4k ones and for the love nor money understand how to edit the yml so i can see the high resolution for recording 24/7 or even when viewing in the frigate viewer.I appreciate your helps guys.When i got to config editor this is what i have.mqtt: enabled: false cameras: name_of_your_camera: # <------ Name the camera enabled: true ffmpeg: inputs: - path: rtsp://viewer:[email protected].***:554/streaming/channels/102 # <----- The stream you want to use for detection roles: - detect - path: rtsp://viewer:[email protected].***:554/streaming/channels/101 roles: - record detect: enabled: false # <---- disable detection until you have a working camera feed width: 3840 height: 2160 detect: enabled: true version: 0.16-0
January 8Jan 8 Author 14 hours ago, xtremedetailz said:Ok guys i have now got it installed and can log in and even find a camera. (had to set static ip i think in the camera)Now the cameras i have are hikvision 4k ones and for the love nor money understand how to edit the yml so i can see the high resolution for recording 24/7 or even when viewing in the frigate viewer.I appreciate your helps guys.When i got to config editor this is what i have.mqtt:enabled: false cameras:name_of_your_camera: # <------ Name the camera enabled: true ffmpeg: inputs: - path: rtsp://viewer:[email protected].***:554/streaming/channels/102 # <----- The stream you want to use for detection roles: - detect - path: rtsp://viewer:[email protected].***:554/streaming/channels/101 roles: - record detect: enabled: false # <---- disable detection until you have a working camera feed width: 3840 height: 2160detect:enabled: trueversion: 0.16-0Are you following the getting started?https://docs.frigate.video/guides/getting_started#configuring-frigateAre you looking in the logs for errors?
February 27Feb 27 hoping for some help as I can not get my GPU ( Nvidia 4060) workingfrigate-logs.txtWhen I installed frigate it was using the GPU, then after adding a few camera it just sits idle, and only uses the CPUIs there something I need to change in the config file?
February 28Feb 28 Author 22 hours ago, rbf351 said:hoping for some help as I can not get my GPU ( Nvidia 4060) workingfrigate-logs.txtWhen I installed frigate it was using the GPU, then after adding a few camera it just sits idle, and only uses the CPUIs there something I need to change in the config file?With such little info is not easy to help you.Are you using the GPU just for video decoding or also for detection?In case that you are using it for detection, did you installed the proper branch?Did you configured the ffmpeg hardware acceleration properly? https://docs.frigate.video/configuration/hardware_acceleration_videoIn case that you are using it for detection, did you followed the steps to generate de model and configured it properly? https://docs.frigate.video/configuration/object_detectors#nvidia-tensorrt-detector...
February 28Feb 28 1 hour ago, yayitazale said:With such little info is not easy to help you.Are you using the GPU just for video decoding or also for detection?In case that you are using it for detection, did you installed the proper branch?Did you configured the ffmpeg hardware acceleration properly? https://docs.frigate.video/configuration/hardware_acceleration_videoIn case that you are using it for detection, did you followed the steps to generate de model and configured it properly? https://docs.frigate.video/configuration/object_detectors#nvidia-tensorrt-detector...I'm using it for both, or at least that it what I thought I was doingI'm using the ghcr.io/blakeblackshear/frigate:stable-tensorrt branchlooks like I was missingffmpeg:hwaccel_args: preset-nvidia from the config filenow I am seeing this when running nvidia-smiI am unable to get the detector to functionwhen i put this line into the config filedetectors:tensorrt:type: tensorrtdevice: 0 #This is the default, select the first GPUFrigate crashes. Edited February 28Feb 28 by rbf351
February 28Feb 28 Author 7 minutes ago, rbf351 said:I'm using it for both, or at least that it what I thought I was doingI'm using the ghcr.io/blakeblackshear/frigate:stable-tensorrt branchlooks like I was missingffmpeg:hwaccel_args: preset-nvidia from the config filenow I am seeing this when running nvidia-smiI am unable to get the detector to functionwhen i put this line into the config filedetectors:tensorrt:type: tensorrtdevice: 0 #This is the default, select the first GPUFrigate crashes.You have configure onnx https://docs.frigate.video/configuration/object_detectors/#onnx
February 28Feb 28 31 minutes ago, yayitazale said:You have configure onnx https://docs.frigate.video/configuration/object_detectors/#onnxI ran the command for YOLOv9 for other detectors. It completed with no issues, but there is no /config/model_cache/yolo.onnx file.the script says exporting to client directory, but where exactly is that?
February 28Feb 28 Author 9 minutes ago, rbf351 said:I ran the command for YOLOv9 for other detectors. It completed with no issues, but there is no /config/model_cache/yolo.onnx file.the script says exporting to client directory, but where exactly is that?The same Path where you are running the script I suppose
February 28Feb 28 Just now, yayitazale said:The same Path where you are running the script I supposejust found it in the root directory, and moved it to where it needs to beseems like it's now running properly.Thank you
March 27Mar 27 Hello First I LOVE Frigate and if i cant fix this i ok with it. I hope this is a good place to ask .. been running frigate for some time with no problems all the ways up to v17 now and i seem to be having a problem. the screen as you are watching live only shows 1 ever 2 or 3 sec. nothing has changed here that i know of. Frigate is running on a Server as i UN-Raid server :Supermicro X9QR7-TF+/X9QRi-F+ , Version 123456789American Megatrends Inc, Version 3.0aBIOS dated: Thu 3 Apr 2014 12:00 AMProcessors 4 of Intel® Xeon® CPU E5-4650 v2 @ 2.40GHz Memory: 128 GiB DDR3 Multi-bit ECCno Video Card but i have a Coral TPU PCI based TPU installed: 1 detectors: coral: type: edgetpu device: pci:0 classify: truethe only thing that is running is MQTT server and Plex (No one is using plex but me and it make no differences that i can see )I only have 3 cameras. I don't under understand why it is so slow all play back is at full speed (even with Audio) the cameras are all POE. They are all on there own wired network with nothing but cameras and Un-Raid 2nd port on the server set to the same address group Here is the Config From Frigate:thanks for any help .. I am hoping some one see the problem i cant Frigat_config.txt
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.