comet424 Posted October 25, 2020 Share Posted October 25, 2020 (edited) i use a share for all my downloads from windows to download to backups etc and i wasnt able to to make directories etc.. also had a glitch last night audio files play back.. so today i couldnt write.. its likes share has gone read only.. a reboot didnt help... but i did run the docker safe and seems to fixed it.. also i running the new permissions as i not sure realyl which one to run to give all access to all the files.. wouldnt even know how u could setup everyhting is read only unless a certain account logs in an then its full access read write.. but is it good to have a daily permission fix on entire array.. what could be causing this issue... what is some good practices to fix or keep this from happening persmissions gone crazy i guess.. as i just use to windows and its always full access unless i set it to read only Edited October 25, 2020 by comet424 Quote Link to comment
comet424 Posted October 25, 2020 Author Share Posted October 25, 2020 guess i should done diagnostic before i ran the docker safe and new permissions i bet?? but here it is after i ran those tower-diagnostics-20201025-0953.zip Quote Link to comment
trurl Posted October 25, 2020 Share Posted October 25, 2020 On mobile now so can't look at Diagnostics yet. Is this just some files? How are these files created? Quote Link to comment
comet424 Posted October 25, 2020 Author Share Posted October 25, 2020 it was all files at least my download.. i had issues last night with my music folder music was glitching or something but this morning my sister sent me some of her home videos in moi format so i ran the mkvtool i normally convert to mkv and it wasnt allowing it.. it was giving errors couldnt write new file.. but if i coped the files to windows to my regular ntfs and ran mktool had no issues.. and then i wasnt able to create a directory forgot the error now.. but once i ran the docker safe.. and ran the mkvtool on my sisters video files it was able to write to the directory on the array.. i use the "downloads" share for all downloads.. Quote Link to comment
trurl Posted October 25, 2020 Share Posted October 25, 2020 Do you have docker applications downloading? Quote Link to comment
comet424 Posted October 25, 2020 Author Share Posted October 25, 2020 I use transmission and deluge but had them off.. well transmission was in pause mode. but those 2 they download to a temp share on the array for incomplete and then moves to a "downloads\transmission complete" and a "downloads\deluge complete" folder i was thinking going to use an unassigned drive for downloading.. and then when complete moves to the array? not sure which is better so windows be "downloads\windows download" sisters stuff "downloads\sisters stuff" Quote Link to comment
comet424 Posted October 25, 2020 Author Share Posted October 25, 2020 and when i mentioned i had music issues.. i a DJ and have my music on the array and i play directly from there.. but had 2 really messed up crashes and then this morning i couldnt write to the array least the Downloads... so i was thinking maybe whole array was a read only or parts i have no idea but my luck it wont show any errors in diagnostics as i didnt do it prior to a reboot and then ran new persmissions new docker tools Quote Link to comment
trurl Posted October 25, 2020 Share Posted October 25, 2020 Nothing obvious in Diagnostics and maybe wouldn't tell us anything at the file level anyway. Is this a new problem? Many applications will have a setting somewhere which controls permissions of files it creates. For example, transmission has umask in settings.json in its appdata. We really need to take a look at a specific file or folder that is exhibiting the problem, so next time it happens post again to this thread before fixing it. Quote Link to comment
comet424 Posted October 25, 2020 Author Share Posted October 25, 2020 (edited) ah ok well that sucks right.. now the unmask is that the same as the pgid and pid? and or do you have to edit the settings.json? and isn there just a broad template always give full access? or is that pgid pid key 5 key6 always learning still not smart enough at linux thats for sure but ya this morning it was i guess folder issue it didnt like any files so it was like "downloads" folder was read only it seemed but who knows.. but ill do that ill post ahead of time.. and then the weird music software crashing on me technology is great till it breaks then you curse at it lol Edited October 25, 2020 by comet424 Quote Link to comment
comet424 Posted November 1, 2020 Author Share Posted November 1, 2020 (edited) @trurl so its happened again had glitchs with music and then my download folder I found my transmission downloads wont let me rename files when I normally can.. can not delete and my music share /map network drive went into a read only mode too it seems.. it wasn't able to write to that directory I didn't reboot but I waited 8 hours to make diagnostic file so dunno it if it helps? and in transmission json what rights would I be looking for... and why my map drive went into a read only mode for like 20 min.. I have tried different peoples ideas I read for the 2 rights 0 0 or 100 99 or 1000 0 but the 0 0 seemed to work best here and in krusader but not sure what the 2 rights really should be for admin access tower-diagnostics-20201101-0913.zip Edited November 1, 2020 by comet424 Quote Link to comment
comet424 Posted November 1, 2020 Author Share Posted November 1, 2020 1 hour ago, trurl said: PUID=99 PGID=100 ill re try that I used to have that too under Krusader but it was giving me Issuesm as I reported in the krusader form issues but it seemed to fix if I went 0 0 from the 99 100... so when I went to the 0 0 in krusader it fixed that issue reason I guess I had transmission set to 0 0 and does the diagnostics say anything why my Mapped drive on Unraid my "music" share was stuck in a read only last night for a while but ill change it back transmission what does the 0 0 I have it set do what kinda permission is that and what is the 1000 user permission.. ill have to google these later too later to read up on them so much easier check box's on permissions lol Quote Link to comment
trurl Posted November 1, 2020 Share Posted November 1, 2020 0 0 is root user and root group 99 100 is nobody user and users group. This is what you need to access files from another computer on the network. Quote Link to comment
comet424 Posted November 1, 2020 Author Share Posted November 1, 2020 so 0 0 is ok for Krusader but Transmission to set to 99 100 is not on a different computer... its a docker for unraid so shouldn't it be 0 0 or the files need to be saved as 99 100 so then I can access the files from other computers so should I be changing the 0 0 on krusader back to 99 100 I did it because I was having issues transferring files from unassigned ntfs drives and 0 0 fixed that issue as I planning to re changed my transmission to saved to a NTFS unassigned drive so it keeps the array shut down to save drives instead of saving to array and what is a 1000 user? Quote Link to comment
comet424 Posted November 1, 2020 Author Share Posted November 1, 2020 the reason I changed the krusader to use 0 0 is when I had issues transferring like I mentioned unassigned drive to array or vise versa but when I did it in windows from the unassigned drive share to the array windows had no issues and vice versa minus windows protected like windows folder but I wanted to plug into server and do it krusader so it goes faster and the 99 100 couldn't transfer but the 0 0 did so when do you use 99 100 and 0 0 but then have full access to files from Windows as id want root access all the time wouldn't I? or do you after using Krusader should then use the Docker Safe or New Permissions tool so fixes all root moved files Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.