October 26, 20205 yr Hello I have been having a long running issue with my parity check where it is processing at less than 1mb/s. The parity is currently only 1tb and specifies it will take at least 11 days to complete which is ridiculous I would think. I have the parity running in safe mode with no plugins or anything and that is the speed which is currently being recorded. If anyone can provide any assistance that would be appreciated. Please find the attached diagnostics package Hardware: Motherboard: Supermicro x8DTU-LN4+, Version 2.0 CPU: Dual Xeon X5550 Memory: 141.7gib Cheers Josh auxillium-diagnostics-20201026-1523.zip
October 27, 20205 yr Community Expert Run the diskspeed docker to check devices and controllers are performing normally.
October 28, 20205 yr Author Hey Johnnie that seemed to do the trick, There was one drive that was only writing at 1mb/s which is what was triggering the limit. I have replaced it and its now doing the data re-build so once its complete ill do the parity check again but I believe this should be done. I will update the thread when I know for sure Thanks! Josh
October 28, 20205 yr Author I can confirm that replacing the drive that was marked by the diskspeed docker did the trick Cheers! Josh
Archived
This topic is now archived and is closed to further replies.