1q8448q1 Posted October 29, 2020 Share Posted October 29, 2020 (edited) I got an error message that there has been an error with one of the disks. It had been disabled and only reenabled after a reboot. You can find my diagnostics plus the SMART report attached. Is there something I should do or can I safely keep the server operated? Thank you very much for your support! naskiller-diagnostics-20201029-1300.zip naskiller-smart-20201029-1321.zip Edited November 16, 2020 by 1q8448q1 new info Quote Link to comment
Frank1940 Posted October 29, 2020 Share Posted October 29, 2020 I would start by hooking up a monitor and keyboard to your server and seeing what is on the screen. There is something going on with Disk 2 but I would still think that the server should still boot up... But you are probably seem to be aware of that. Quote Link to comment
1q8448q1 Posted October 29, 2020 Author Share Posted October 29, 2020 Sorry, I edited the post while you were answering. The reboot just took quite a while and after that I was able to get the disks SMART report. Unraid is now rebuilding... Is there something I should do or can I safely keep the server operated? Quote Link to comment
JorgeB Posted October 29, 2020 Share Posted October 29, 2020 That disk has a lot of remapped sectors:Elements in grown defect list: 16320 It should be replaced. Quote Link to comment
1q8448q1 Posted November 15, 2020 Author Share Posted November 15, 2020 On 10/29/2020 at 1:54 PM, JorgeB said: That disk has a lot of remapped sectors: Elements in grown defect list: 16320 It should be replaced. Thank you! I just replaced the disk, but unfortunately Unraid does not detect the new disk even tough the SAS-controller does. I created a new thread for this: Quote Link to comment
1q8448q1 Posted November 16, 2020 Author Share Posted November 16, 2020 (edited) I successfully replaced the drive now. Thank you very much for your help!!! Edited November 16, 2020 by 1q8448q1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.