realdiel Posted October 31, 2020 Share Posted October 31, 2020 (edited) Greetings UNRAID community. I received the status report below via my email notifications. Disk 5 is active and seems to be working fine, but there are read errors documented in the attached log file. A smart short self-test passed. Do I need to stop and restart my array/dig deeper into the operation of disk 5 further? It's only ~3 months old or so. It's under warranty if I need to replace it. I believe what precipitated this was my UPS inexplicably powered off a few days ago. Parity was rechecked successfully after the UPS turned itself off. There was no power outage with our electrical grid so not sure why the UPS powered off (working on that with CyberPower to figure out what happened there). Here's the emailed report: Event: Unraid Status Subject: Notice [TOWER] - array health report [FAIL] Description: Array has 7 disks (including parity & cache) Importance: warning Parity - WDC_WD120EMFZ-11A6JA0_9RJ5LLHC (sde) - active 32 C [OK] Disk 1 - WDC_WD120EMAZ-11BLFA0_8CK40JJE (sdd) - active 32 C [OK] Disk 2 - ST8000VN0022-2EL112_ZA1AMVH3 (sdg) - active 35 C [OK] Disk 3 - WDC_WD120EMAZ-11BLFA0_8CJWDE6E (sdf) - active 34 C [OK] Disk 4 - WDC_WD120EMFZ-11A6JA0_9JHG38XT (sdc) - active 29 C [OK] Disk 5 - WDC_WD120EMFZ-11A6JA0_XJG0KLNM (sdi) - active 34 C (disk has read errors) [NOK] Cache - Samsung_SSD_860_EVO_1TB_S3Z8NB0K301204A (sdj) - active 36 C [OK] Parity is valid Last checked on Thu 29 Oct 2020 01:02:56 PM CDT (2 days ago), finding 0 errors. Duration: 1 day, 37 minutes, 28 seconds. Average speed: 135.4 MB/s syslog.txt Here's my UNRAID server build: MB: ASRock E3C246D4U CPU: Xeon E-2288G CPU cooler: Noctua NH-U9S CPU Cooler RAM: x2 M391A4G43MB1-CTD - Samsung 32GB DDR4-2666 ECC UDIMM PC4-21300V-E Dual Rank x8 Module PSU: RM Series™ RM850 — 850 Watt 80 PLUS® Gold Certified Fully Modular PSU Storage: x5 12TB WD Easystor (shucked Red/white label NAS drive), 1x 8TB Seagate Iron Wolf Case: Silverstone CS380 Case cooling: 3x Noctua NF-F12s Cache: SAMSUNG 860 EVO Series 2.5" 1TB SATA III V-NAND 3-bit MLC Internal Solid State Drive (SSD) Edited October 31, 2020 by realdiel Quote Link to comment
Vr2Io Posted October 31, 2020 Share Posted October 31, 2020 55 minutes ago, realdiel said: Do I need to stop and restart my array/dig deeper into the operation of disk 5 further? No, simple execute extend / long test for disk5, if fail, go warranty. 1 Quote Link to comment
realdiel Posted November 1, 2020 Author Share Posted November 1, 2020 Thanks for the response. I'll give a long SMART test a shot then. Quote Link to comment
realdiel Posted November 3, 2020 Author Share Posted November 3, 2020 It passed the long SMART test. The array health report failed again (disk 5) with the prior read errors which are now documented on the main dashboard for UNRAID. Anything to be concerned about, or am I good to go? Quote Link to comment
Vr2Io Posted November 3, 2020 Share Posted November 3, 2020 If long test pass, then problem should not on disk side, pls troubleshoot on controller, cable, etc. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.