KoNeko Posted November 2, 2020 Share Posted November 2, 2020 (edited) i have a very slow parity check going at this moment. I had this problem before and when i reset unraid its all fine again. ( Atleast last time) I didnt reset it yet this time but i have put it on pause. it was going with 4-9 MB/sec Unraid Status Notice [THANEKOS] - array health report [PASS] 1604272801 Array has 8 disks (including parity & cache) normal Parity - WDC_WD120EDAZ-11F3RA0_5PG67DBF (sdi) - active 38 C [OK] Disk 1 - WDC_WD120EDAZ-11F3RA0_5PG611EF (sdh) - active 38 C [OK] Disk 2 - WDC_WD120EDAZ-11F3RA0_8CKZESUF (sdf) - active 40 C [OK] Disk 3 - WDC_WD30EFRX-68AX9N0_WD-WMC1T0904397 (sdb) - active 38 C [OK] Disk 4 - WDC_WD30EFRX-68AX9N0_WD-WMC1T0969769 (sdc) - active 39 C [OK] Disk 5 - WDC_WD80EDAZ-11TA3A0_VDKUVMNK (sdg) - active 39 C [OK] Cache - Samsung_SSD_860_EVO_250GB_S4CJNZFN116988V (sdd) - active 34 C [OK] Cache 2 - Samsung_SSD_840_PRO_Series_S12RNEAD700080B (sde) - active 27 C [OK] Parity check in progress. Total size: 12 TB Elapsed time: 50 minutes Current position: 29.3 GB (0.2 %) Estimated speed: 4.7 MB/sec Estimated finish: 29 days, 6 hours, 3 minutes Sync errors corrected: 0 added my diag Edit: i let the integrity check finsh and resumed the parity and now it goes ok again. Not top speed but around 100-130 MB/s thanekos-diagnostics-20201102-0320.zip Edited November 2, 2020 by KoNeko Solved Quote Link to comment
KoNeko Posted November 2, 2020 Author Share Posted November 2, 2020 (edited) it might be that File Integrity is running on the same disk at this time but in the File Integrity settings i have the When parity operation is running: don't start But i cant see that anywhere. in the Gui. Edited November 2, 2020 by KoNeko Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.