Disk Errors in pre-clear


Recommended Posts

Thanks for the response and advice.

 

I checked the connections and plugged the sata from the drive above into a different socket on the SATA card. Started the array again and ran clear on the disc - no errors this time, but 2 CRC errors. Formatted the disc and thought I was fine.

 

I started moving files onto the array, and everything seemed fine, so left it for a couple of hours. When I came back, both this drive, and the other 12tb drive I added recently, are displaying errors - see image attached.

 

I am assuming now that this is the SATA card i'm using (Ziyituod (https://www.amazon.co.uk/gp/product/B07T8XNQT6/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1)) or I need new sata cables, but I would have assumed if the cables were faulty it would be a binary issue.

 

Grateful for any further advice you may have.

unraid disk issue.JPG

teletran-diagnostics-20201109-1401.zip

Link to comment

It's possible, even likely:

 

Nov  9 05:07:22 Teletran kernel: ata7.15: limiting SATA link speed to 3.0 Gbps
Nov  9 05:07:27 Teletran kernel: ata7.15: softreset failed (1st FIS failed)
Nov  9 05:07:27 Teletran kernel: ata7.15: failed to reset PMP, giving up
Nov  9 05:07:27 Teletran kernel: ata7.15: Port Multiplier detaching
Nov  9 05:07:27 Teletran kernel: ata7.00: disabled
Nov  9 05:07:27 Teletran kernel: ata7.02: disabled
Nov  9 05:07:27 Teletran kernel: ata7.00: disabled

But can also be a cable issue.

Link to comment

Many thanks for your continued patience and advice. My main concern was that it would be a disk issue, but that does not appear to be the case. Going to order some new sata cables and see if they do the trick. If not, I will look to get a better SATA card!

Edited by BlackBriar
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.