Hello Guys,

 

Some time ago, i had read Errors on the array. But it was BTFRS errors and i removed the cache drive and it stopped spewing errors.

 

But tonight, when i came home, it says it had found read errors. It it bad? Should i buy new drives?

 

Thanks a lot

.DS_Store domain.cfg go docker.cfg super.dat ident.cfg share.cfg network.cfg disk.cfg WDC_WD40EFRX-68N32N0_WD-WCC7K5VY42E9-20201121-1827 parity (sdd).txt SanDisk_Ultra_Fit_4C530001230713104105-0-0-20201121-1827 flash (sda).txt WDC_WD40EFRX-68N32N0_WD-WCC7K6SKLNHN-20201121-1827 disk2 (sdc).txt Samsung_SSD_860_EVO_1TB_S4FMNE0MB10644A-20201121-1827 cache (sdb).txt WDC_WD40EFRX-68N32N0_WD-WCC7K5VY4XY7-20201121-1827 disk1 (sde).txt Windows 10.xml cmdline.txt btrfs-usage.txt plugins.txt motherboard.txt iommu_groups.txt ethtool.txt folders.txt lsmod.txt lsscsi.txt loads.txt memory.txt lspci.txt meminfo.txt lsusb.txt top.txt ps.txt vars.txt lscpu.txt lsof.txt df.txt ifconfig.txt libvirt.txt docker.txt syslog.1.txt syslog.txt no qemu log files unraid-6.8.3.txt appdata.cfg domains.cfg M---a.cfg T----------e.cfg isos.cfg W----------s.cfg system.cfg D-------s.cfg D-------------o.cfg

Disk2 appears to be failing, run an extended SMART test.

 

P.S. next time please post the single diags zip file.

Ok, i'm running it on Disk 2, but DIsk 1 is also saying that there are some errors

 

Could it be software related?

Also start a test for disk1, it can't be software, but it can be a different hardware issue, though it's logged as an actual disk problem for both disks.

Hum, the Two tests completed without Error , here are the reports.

 

It doest not seem like there is a major problem. What do you think?

 

WDC_WD40EFRX-68N32N0_WD-WCC7K5VY4XY7-20201122-1341.txtWDC_WD40EFRX-68N32N0_WD-WCC7K6SKLNHN-20201122-1349.txt

Disks are showing some SMART warnings, but this type of read errors can be intermittent, run another check (non correcting), also keep an eye on these attributes, if they continue to increase there will likely be more errors soon.

 

ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   199   051    -    5
  ...
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    6

 

 

Ok thanks a lot, i'll check