November 30, 20205 yr Hello, i am new to unraid and just started to play around a bit on Server 1 where it was running with no issues. I had to plug the USB-stick into another server (Server 2) and also there it was working fine. Today i replugged the stick back to server 1. But i am not able to boot it properly. I can boot from USB, i can choose the different modes (GUI, no GUI, safe mode etc.). Than I can see the row of codes and it seems to load. But thats all...after the "loading" the monitor goes off (says, no input detected) and nothing happens. I let it run for 1 hour, but no screen, and i can't ping the Server. I formatted the USB stick, did a new copy using the unraid usb tool, did it also manually, tried UEFI and legacy, tried different USB sticks..switch USB ports..but always the same behaivior. Assigned a fixed IP in the config file, but still not able to reach the server I also searched for this issue. But mostly, others were able to ping an access the server using the Web-GUI. not working for me.. Unfortunately i can't try it on my Server 2. Do you guys have any idea what i can try? Specs: MB: Asrock X470 Taichi Ultimate CPU: Ryzen 5 2600x RAM: 32 GB G.skill DDR4 3200 USB: - SanDisk Ultra Flair 32GB - Kingston DataTraveler SE9 -DTSE9H/32GB (USB 2.0) GPU: nvidia GT710
November 30, 20205 yr Author i tried gparted, and it is also not working. I can see the bootloader, like with unraid, and then the monitor shuts off. Still no idea what i can check as next. I also tried nomodeset, without luck UDPATE: Sooo...i focused too much on the USB stick...the CPU had an issue. After replacing it, everything is working like it should Edited December 1, 20205 yr by jeneeben
Archived
This topic is now archived and is closed to further replies.