limpid Posted December 3, 2020 Share Posted December 3, 2020 Hi All Again to ask how to deal with big sur on KVM. so far it have worked catalina on unasigned device NVME samsung . and when I give update gives a black screen and the logo in the middle. when preinstall catalina work. but update to big sur not. what clover.qcow2 to use Quote Link to comment
derpuma Posted December 4, 2020 Share Posted December 4, 2020 I updated to Big Sur with the help of a user here. You need at least a bootloader update. Best way to go is opencore, but newer clover with the right quirks enabled should do the trick too. It is not a trivial single click update. You need to modify you EFI Partition in the qcow2 image or simply create a new dmg file an put your EFI bootloader in there and point your xml to take it instead of clover.qcow2. If your not familiar with updating bootloaders be careful. Backup everything you really need before you update. Quote Link to comment
limpid Posted December 6, 2020 Author Share Posted December 6, 2020 I tried this several times with different efi folders but without success I don't know where I'm wrong which folder to use to put in clover.qcow2 . does it matter ha z270m dzh virth 7600k if you have a finished folder send me to try pls on xml. side have some code to ad/remove i test this </devices> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='************************'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='IvyBridge,vendor=GenuineIntel,+hypervisor,-erms,+invtsc,kvm=on,+topoext,+invtsc,+avx,+aes,+xsave,+xsaveopt,+ssse3,+sse4_2,+popcnt,+arat,+pclmuldq,+pdpe1gb,+rdtscp,+vme,+xsave,+umip,+topoext,check'/> <qemu:arg value='-smp'/> <qemu:arg value='16,sockets=2,cores=8,threads=1'/> </qemu:commandline> </domain> ======================================================== </devices> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='************************'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='Penryn,kvm=on,vendor=GenuineIntel,+invtsc,vmware-cpuid-freq=on,+pcid,+ssse3,+sse4.2,+popcnt,+avx,+aes,+xsave,+xsaveopt,check'/> </qemu:commandline> </domain> --------------------------------------------------------- ========================================================== no efekt Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.