Unraid 6.8.3

Intel X540-T2 NIC

AMD firepro W2100

 

Windows 10 VM on vlan if that matters

 

When I boot Unriad without the gfx card passedthrough my dashboard shows my 10gbe link and everything is all good. As soon as I passthrough the gfx card and start the VM the link shows 1gb on the dashboard. I will attach my diag files incase anyone can help me out. I will also include a clip of the logs after the passthough is set and the VM is booting.

 

Dec 7 22:46:21 Tower kernel: ixgbe 0000:81:00.0 eth0: NIC Link is Down
Dec 7 22:46:21 Tower kernel: br0: port 1(eth0) entered disabled state
Dec 7 22:46:21 Tower kernel: br0.100: port 1(eth0.100) entered disabled state
Dec 7 22:46:24 Tower ntpd[3218]: Deleting interface #2 br0, 192.168.1.12#123, interface stats: received=1021, sent=1038, dropped=0, active_time=215923 secs
Dec 7 22:46:24 Tower ntpd[3218]: 216.239.35.0 local addr 192.168.1.12 -> <null>
Dec 7 22:46:24 Tower ntpd[3218]: 216.239.35.4 local addr 192.168.1.12 -> <null>
Dec 7 22:46:24 Tower ntpd[3218]: 216.239.35.8 local addr 192.168.1.12 -> <null>
Dec 7 22:46:24 Tower ntpd[3218]: 216.239.35.12 local addr 192.168.1.12 -> <null>
Dec 7 22:46:40 Tower kernel: ixgbe 0000:81:00.0 eth0: NIC Link is Up 1 Gbps, Flow Control: None
Dec 7 22:46:40 Tower kernel: br0: port 1(eth0) entered blocking state
Dec 7 22:46:40 Tower kernel: br0: port 1(eth0) entered forwarding state
Dec 7 22:46:40 Tower kernel: br0.100: port 1(eth0.100) entered blocking state
Dec 7 22:46:40 Tower kernel: br0.100: port 1(eth0.100) entered forwarding state
Dec 7 22:46:41 Tower kernel: ixgbe 0000:81:00.0 eth0: NIC Link is Down
Dec 7 22:46:41 Tower kernel: br0: port 1(eth0) entered disabled state
Dec 7 22:46:41 Tower kernel: br0.100: port 1(eth0.100) entered disabled state
Dec 7 22:46:45 Tower kernel: ixgbe 0000:81:00.0 eth0: NIC Link is Up 10 Gbps, Flow Control: None
Dec 7 22:46:45 Tower kernel: br0: port 1(eth0) entered blocking state
Dec 7 22:46:45 Tower kernel: br0: port 1(eth0) entered forwarding state
Dec 7 22:46:45 Tower kernel: br0.100: port 1(eth0.100) entered blocking state
Dec 7 22:46:45 Tower kernel: br0.100: port 1(eth0.100) entered forwarding state
Dec 7 22:46:47 Tower ntpd[3218]: Listen normally on 3 br0 192.168.1.12:123
Dec 7 22:46:47 Tower ntpd[3218]: new interface(s) found: waking up resolver
Dec 7 22:46:58 Tower kernel: ixgbe 0000:81:00.0 eth0: NIC Link is Down
Dec 7 22:46:58 Tower kernel: br0: port 1(eth0) entered disabled state
Dec 7 22:46:58 Tower kernel: br0.100: port 1(eth0.100) entered disabled state
Dec 7 22:47:01 Tower ntpd[3218]: Deleting interface #3 br0, 192.168.1.12#123, interface stats: received=3, sent=9, dropped=0, active_time=14 secs
Dec 7 22:47:01 Tower ntpd[3218]: 216.239.35.0 local addr 192.168.1.12 -> <null>
Dec 7 22:47:01 Tower ntpd[3218]: 216.239.35.4 local addr 192.168.1.12 -> <null>
Dec 7 22:47:01 Tower ntpd[3218]: 216.239.35.8 local addr 192.168.1.12 -> <null>
Dec 7 22:47:01 Tower ntpd[3218]: 216.239.35.12 local addr 192.168.1.12 -> <null>
Dec 7 22:47:18 Tower kernel: ixgbe 0000:81:00.0 eth0: NIC Link is Up 1 Gbps, Flow Control: None
Dec 7 22:47:18 Tower kernel: br0: port 1(eth0) entered blocking state
Dec 7 22:47:18 Tower kernel: br0: port 1(eth0) entered forwarding state
Dec 7 22:47:18 Tower kernel: br0.100: port 1(eth0.100) entered blocking state
Dec 7 22:47:18 Tower kernel: br0.100: port 1(eth0.100) entered forwarding state
Dec 7 22:47:20 Tower ntpd[3218]: Listen normally on 4 br0 192.168.1.12:123
Dec 7 22:47:20 Tower ntpd[3218]: new interface(s) found: waking up resolver

 

 

 

tower-diagnostics-20201207-2324.zip

Edited December 9, 20205 yr by itskamel

anyone? @limetech could this be a driver issue? Btw I might add, when I was using the onboard nic (1gb) the passthough of the gfx card worked fine. No network issues.

Edited December 9, 20205 yr by itskamel

bump, anyone? i have been searching and searching but i do not see anyone else with this issue. I have been told it could possibly be a pic lanes issue but not sure how to confirm.