Problem Passthrough AVM GmbH Fritz!Card PCI v2.0 ISDN with PCIe to PCI Adapter


Recommended Posts

Hi,

 

I have a AVM GmbH Fritz!Card PCI v2.0 ISDN and I want to passthrough the card to Windows but I got a error.

I googled this error but don't find a solution. Hopefully you can help me.

 

"Failed to set up TRIGGER eventfd signaling for interrupt INTX-0: VFIO_DEVICE_SET_IRQS failure: Device or resource busy"

 

image.thumb.png.86bacdef0a2d72f98e96b5a3bbc7b70f.png

 

 

I tried different PCIe ACS override settings but no change.

 

VMS Error attached.

 

 

 

 

VMS_error.txt

Link to comment

Try installing the adapter+card in different PCI-e slots.

 

I've noticed the IRQ sharing actually comes into play with legacy PCI devices and passthrough.

 

Its also possible this device is simply not going to get along with PCI passthrough, not all of them do.

 

I think there is also an option in VM settings for "allow unsafe interrupts". I've never used it and am not sure what it does but it might be worth a shot.

Link to comment

There's a third party (asmedia) PCIe to PCI bridge listed in your first post. So the device is actually a legacy PCI device with a converter chip basically. Not a lot of people try to run legacy PCI stuff but it does work sometimes at least.

 

Maybe try binding the device to vfio at boot if it isn't already.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.