I was transferring data to the array and the transfer froze for a second. After the transfer completed, I checked unRAID and it was reporting a red X on one drive.
Checking the drive the following receives a warning:
199-UDMA_CRC_Error_Count: 2
I ran an extended SMART test on the drive along with a round of pre-clearing. The drive passed SMART test and successfully completed the pre-clear.
The question is should I send the drive back to manufacturer (HGST)? Can I even creat
WDC_EARS
UDMA CRC error_output - RAW VALUE = 8731 Power on hours = 7y 9m 4d 16h
This is on my LSI card, but I changed the SATA cable to my on-board sata port (to swap the cable) rather then using the LSI breakout cable and still prone to the error.
I think due to the age of the drive it needs to be replaced to be honest.
Let me know your thoughts
Thanks