[Plugin] IPMI for unRAID 6.1+
IPMI plugin for unRAID 6.1+
This plugin is for viewing the local or remote sensors and event logs of a motherboard with ipmi. Sensors can be viewed in basic or advanced mode. Sensor reading color will be green if between non critical, yellow for critical and red for non recoverable. Event Log can clear all or individual events. Sensors page will refresh every 10 sec while viewing it. You can turn on event notification warnings and remote lan monitoring from the settings page.
1. Co
Go to Settings/IPMI/Config Editor click on Select Config and pick Sensors. Scroll down to each Section Fan and change the 3 lower threshold values to something like 300. Do this for every Section Fan. Like this. Section 540_FAN1... ## Give valid input for sensor type = Fan; units = RPM Lower_Non_Critical_Threshold 300.000000 ## Give valid input for sensor type = Fan; units = RPM Lower_Critical_Threshold 300.000000 ## Give valid input for sensor type = Fan; units = RPM Lower_Non_Recov