[[Support] Linuxserver.io - TVHeadend]

I'm getting an error with this docker: mpegts: too much queued table input data (over 2MB) - tvheadend becomes unresponsive & I need to stop & start the docker to get it going again.

 

A google search throws up a number of references on the tvheadend.org website but it's been down for the last 36 hours or so.

 

Anyone know how to get in touch with tvheadend to let them know there's an issue with their website?

[ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci]

Fixed my error!

 

VM -> Edit Settings -> Options -> Guest Operating System

 

I had this originally set to "CentOS 4/5/6/7 (64 bit)" [force of habit - we have many vms of this type at work]

 

Shutdown vm, modified to "Ubuntu Linux (64 bit)", booted and the errors disappeared.

 

This is booting via plop, first USB device attached is the unraid USB flash drive, second USB device is blank (& unmounted).

[ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci]

I boot from plop and was seeing the errors until I attached a second (blank) USB stick to my unraid VM. Note: I am not passing through a USB controller, only assigning USB devices to the VM. After getting a UPS and configuring a VM for it (with USB cable connected) I was able to remove the second USB from my unraid VM and the errors have not returned.

 

Poor choice of words on my part;  a USB controller was added to the vm and then the 2 USB flash drives were attached.

 

have you tried to mount this stick with unassigned devices? when i tested this with USB UPS, UPS daemon was loaded first to stop error messages..

 

I've tried with the extra USB device both mounted & umounted. The errors continue in the log file.

 

I currently have it attached and mounted in a separate vm (to test the scenario above with a UPS attached vaia USB to a separate vm). Errors continue in the log file.

 

[ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci]

I boot from plop and was seeing the errors until I attached a second (blank) USB stick to my unraid VM. Note: I am not passing through a USB controller, only assigning USB devices to the VM. After getting a UPS and configuring a VM for it (with USB cable connected) I was able to remove the second USB from my unraid VM and the errors have not returned.

 

Poor choice of words on my part;  a USB controller was added to the vm and then the 2 USB flash drives were attached.

[ESXI: usb 1-1: reset high-speed USB device number 2 using ehci-pci]

I can confirm also that just simply formatting a spare usb flash drive I had laying around and adding that USB device to my unRAID VM stopped the error messages for me.  I will also note that I have the unassigned devices plugin installed and the 2nd flash drives shows up under there (though I don't have it mounted).

 

I must be missing something as I have two USB devices passed through to my unraid 6.1.3 (booted via plop) running on ESXi 5.5.0.3116895.

 

The log file is full of errors from both usb drives :-(

 

Nov 2 18:04:25 unraid kernel: usb 1-2: reset high-speed USB device number 3 using ehci-pci

Nov 2 18:04:26 unraid kernel: sd 4:0:0:0: [sdj] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)

Nov 2 18:05:01 unraid kernel: usb 1-1: reset high-speed USB device number 2 using ehci-pci

Nov 2 18:05:01 unraid kernel: sd 3:0:0:0: [sdi] 30529536 512-byte logical blocks: (15.6 GB/14.5 GiB)