.png.e7d28ae103d7875a99dc76a56ef9a5f6.png)
JieKie
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by JieKie
-
-
23 hours ago, JorgeB said:
When Unraid fails to do a clean shutdown it saves the diags in the flash drive /logs folder, post those, there might be some clues there.
-
So it happend again. I can't shut it down. When I ssh into the server and use poweroff i get the "The system is going down for system halt NOW!" but the server keeps running. When I use umout -a it says target is busy for most services
-
The issue has returned. Can I assume the unassigned devices plugin is causing issues? i'm afraid i can't download the log as the UI pages are mostly unresponsive and i will have to force restart the server.
update: managed to snag the logs
-
On 10/14/2022 at 7:20 PM, BzzLghtyr said:
I will also add that I have not taken the time to make this change so my setup still has a majority of docker data in an unassigned device.
So far so good running only the unassigned devices and unassigned devices plus plugin. Maybe you could try monitoring with only the unassigned devices plugin. If you still have problems you can assume its this plugin.
-
On 10/11/2022 at 4:46 PM, JorgeB said:
Try booting in safe mode to rule out any plugin issues.
After a forced reboot i was able to reboot into safe mode. So far i had no more issues, parity check completed. What can i do to determine if a plugin is causing issues?
-
I will follow this thread as I have the exact same problem for a couple of days now. Dockers themselves work fine, but i cant load the docker page. The server does not respond to shutting down, stopping the array, pausing parity check, even pressing the power button does nothing except for the "beeb". When i close a notification it pops back up after a few seconds. I had to forse shut down, problem cam back. Great server name btw.
-
10 minutes ago, binhex said:
only two ways, either you edited the container and accidentally entered in a 1 instead of a 0 and didn't realise you were doing it (too much beer? 🙂 ) or you deleted the edited template and pulled it fresh from CA and forgot to change the LAN_NETWORK. in short there is NO way any of my code has access to your template, so it aint me 🙂
Hhm, the ony thing i did since last time i used them (couple of months ago) was adding 2 disks, move the docker file to cache, and maybe an update. Anyway, doesn't matter, glad its ok now, thanks again.
-
8 hours ago, binhex said:
yep as i suspected incorrect LAN_NETWORK, from your log:-
LAN_NETWORK defined as '192.168.1.0/24'see Q4 if you are struggling to define it correctly:- https://github.com/binhex/documentation/blob/master/docker/faq/vpn.md
Got it back up and running again. How is it possible this changed? My network always has been 192.168.0.0/24. I've been using these dockers for over a year, always worked.
thanks a lot for the help
-
13 hours ago, binhex said:
thats a successful start, what is the ip of the machine running your web browser?.
It's from different devices, different browsers, all in the same range. It's on DHCP but right now it's 192.168.0.20. Unraid is fixed.
I tried clearing cache, incognito, etc..
-
14 hours ago, devnet said:
What network type are you using inside of the docker settings for the VPN versions?
it's briged
-
On 2/6/2022 at 9:30 PM, binhex said:
My apologies, added the log.
So in short, I can't get into the UI (same for qbittorrentvpn an rtorrentvp. the regular binhex deluge works fine)
-
On 1/19/2022 at 5:29 PM, binhex said:
remove both ips from NAME_SERVERS and try again.
I have the same problem, none of the binhex vpn torrent clients seem to work. I tried removing these IP's but the problem is percisting.
-
3 minutes ago, itimpi said:
Once a disk is disabled (which it would be if removed with Unraid running) it has to be rebuilt to get it back into use.
Not quite sure what you then did - did you follow the procedure documented here?
Yeah, kind of.
Ok, then everything checks out as it should be, nothing to worry about (except finding a new spot for my server, my little toddler is fascinated by flashing lights).
I expected to just pop it back in and continue with my day. Thanks for the quick help and info!
-
So, turns out my kid opened the hotswap bay whilst playing. I popped it back in, but unraid couldn't find the disk. I was able to add it as a "new" one. I'ts currently rebuilding onto the same old disk. This can't be right no?
-
Hi,
So I just got my first ever hard drive failure. I got an alert saying one of my drives had errors. Took a look at the array and saw one drive was emulated. I checked the logs and found this:
Jan 26 19:27:37 MELCHIOR kernel: md: disk2 read error, sector=10903897736 Jan 26 19:27:38 MELCHIOR kernel: md: disk2 write error, sector=10903897736This is what the Disk Logs says:
Dec 28 13:36:30 MELCHIOR kernel: mdcmd (3): import 2 sde 64 11718885324 0 WDC_WD120EMFZ-11A6JA0_9RJ64SWL Dec 28 13:36:30 MELCHIOR kernel: md: import disk2: (sde) WDC_WD120EMFZ-11A6JA0_9RJ64SWL size: 11718885324 Dec 28 13:36:30 MELCHIOR emhttpd: read SMART /dev/sde Jan 26 19:09:51 MELCHIOR kernel: sd 8:0:0:0: [sde] Synchronizing SCSI cache Jan 26 19:09:51 MELCHIOR kernel: sd 8:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00I can't seem to be able to start a SMART self test.
Its a chucked WD 12TB, running about 1,5 years. I'm rocking version 6.9.2 with 2 parity drives. The drive itself is pretty full, 94%. I've got a spare 12TB lying around. Should I start preclearing it an replace the failed drive? Or can i check something else first?
regards,
-
Hi everyone,
It's my first post here, i've been using unraid for about half a year now and enjoying it. When i built the server i used a generic unbranded usb drive and a SSD with bad sectors. Not the best idea but i wanted to test unraid, had these laying around and now i'm stuck with these. I'm also running 6 6TB WD reds (1 parity) which i will be replacing with 8 12TB drives (shucked WD white label) (2 parity drives). I'm also looking into encrypting my data, but i'm still on the fence, it's mainly movies, shows, music and console games.
What would be the best course of action? Replace the flash drive and SSD and gradually rebuild the hard drives?
Or replace all drives, remove the config, add the old drives as unassigned drives and copy everything from the old hard drives to the new drives or maybe chuck them into my computer and transfer over the network? This way if something goes wrong i can rebuild the old setup.
I could also add encryption, not sure on this as its just mostly media.
my current setup:
Supermicro X10SL7-F
Intel® Core™ i3-4330
32 GiB DDR3 Single-bit ECC
generic unbranded 16Gb flash drive
CacheCorsair Force 3 SSD 120Gb with bad sectors as cache drive
6 x 6TB WD red (1 parity)
future setup:
sandisk cruzer mini 16Gb
2 x Samsung 860 QVO 1TB as cache raid 1
8 x 12TB WD white label (precleared) (2 parity)
For now i'm using the server as a NAS, but in the future i will experiment with dockers and vm's.
regards,
Various issues after updating from 6.9 to 6.11
in General Support
Posted
thanks, indeed the same issues. For now i have downgraded back to v6.10