Mikevipe
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Mikevipe
-
-
On 8/9/2020 at 11:24 PM, saarg said:
Most likely hardware incompatibility. Try updating the bios or change the slot of the card.
The card doesn't support much anyway, so I would buy a card that you can use. It only supports h264 4:2:0
The problem is I am limited to only (2) PCIE x1 slots. My other two slots are occupied by a raid card and 10gige card to serve the network file shares.
Do you know any other x1 cards? I was unable to find any. I could dremmel out the back of the x1 slot and put in a later card I suppose. I suppose it would be better than no card even if it is scaling down.
-
Hello,
I am running Unraid 6.8.3, I have installed the Unraid Nvidia plugin and installed the Nvidia 6.8.3.
I have an onboard video card set in my bios as the default for Unraid. I have a second GT 710 installed which I am wanting to use for PLEX.
I do not have any other VM trying to access the video card and my syslinux.cfg is stock.
Unraid Nvidia has driver version 440.59 installed and that version shows compatibility with my GT 710.
After rebooting the Unraid Nvidia settings show the following
Nvidia Driver Version: 440.59
GPU 0 Model & BUs: No devices were found
nvidia-smi: Unable to determine the device handle for GPU 0000:07:00.0: Unknown Error
lspci -k shows:
07:00.0 VGA compatible controller: NVIDIA Corporation GK208B [GeForce GT 710] (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. GK208 [GeForce GT 710B]
Kernel driver in use: nvidia
Kernel modules: nvidia_drm, nvidia
07:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1)
Subsystem: ZOTAC International (MCO) Ltd. GK208 HDMI/DP Audio Controller
The only other errors I noticed in dmesg/syslog is:
Aug 9 09:26:39 UNRAID kernel: NVRM: GPU 0000:07:00.0: RmInitAdapter failed! (0x23:0x56:515)
Aug 9 09:26:39 UNRAID kernel: NVRM: GPU 0000:07:00.0: rm_init_adapter failed, device minor number 0
Aug 9 09:26:39 UNRAID kernel: NVRM: GPU 0000:07:00.0: RmInitAdapter failed! (0x23:0x56:515)
Aug 9 09:26:39 UNRAID kernel: NVRM: GPU 0000:07:00.0: rm_init_adapter failed, device minor number 0I know the video card works as it was previously the primary display card for my server.
Also for reference I have tried booting UEFI as well as Legacy with no difference.
Attached is my diagnostics.
Incorrect total, used and free space shown
in General Support
Posted
Hello,
I have (12) 8TB drives with (2) of them being used for Parity. They should each have 7.21 GB usable but unRAID shows them as 8TB space usable. So my current usage shows 49.1TB of 80TB used with 30.9TB free.
From previous experience on all other systems with the same drives formatted I'm getting the true usable space not the manufacturer labeled capacity.
Anyway to make this properly display the "real" used and free capacity?
Thanks