[Rocket 750 and Staggered Spin Up causing issues]

Gave up on the Rocket 750 and bought a new "LSI Logic Controller Card 05-25699-00 9305-24i 24-Port SAS 12Gb/s pci-e 3.0" from a Chinese seller on eBay for $399 USD.

 

Works perfectly out of the box:

 - motherboard recognises the card - comes up with "Avago SAS3 BIOS" and enumerates the drives I have installed so far

 - boots UnRAID quickly with no timeout messages

 - drives recognised immediately by UnRAID

 

Need to get more SFF-8087 to SFF-8643 cables as the card uses SFF-8643 connectors, but so far so good.

[Rocket 750 and Staggered Spin Up causing issues]

Hi all,

 

Long time tinkerer and lurker. I'm stuck with this problem and don't know how to solve it.

 

UnRaid 6.8.3

Wanting to build a 24 drive UnRaid

Have a Rocket 750 40 port HBA

 

On power ON

If I go:

Rocket 750 -> drives: works perfectly

All drives spin up simultaneously as soon as power is turned on.

 

If I go:

Rocket 750 -> backplane -> drives: times out and drives are taken offline.

Drives spin up sequentially only after the Rocket 750 driver is initialized.

However, if I press RESET after all the drives have spun up, the next boot is fine - all drives are found.

 

 

So far I've tried:

2 different backplanes (one SAS x6, one SATA x 24)

Tried setting the Rocket 750 to non Staggered Spin Up using the CLI

 

 

Before I bite the bullet and spring for a 24 port LSI HBA (no room for port multipliers) - any suggestions?

(I understand that newer versions of UnRAID no longer support the Rocket 750 so it may be a lost cause).

 

 

[New Highpoint Rocket 750 - 40-Port SATA 6GB/s]

Took the plunge and bought one of these off eBay. Works fine with 6.8.3.

 

There is a post in Bug Reports / PreReleases which indicates that it does not work with 6.9.0-beta25.