crankbearing
-
Posts
226 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by crankbearing
-
-
WOW what a fun night. So I installed my other two new WD 3.0TB EZRX and 2 1yr old NEW 2.0TB EARS and a new 7K2000 (RUNS HOT 40C in no time)) Hitachi and started a preclear on the works. No jumpers on any wd. These are on the boards I/O so I set to ACHI and max speed to sata 6GB/s and the 3.0TB are that. About three in the morning wife wakes me up says she heard a bang could not figure it out. One 3TB stopped reading with an I/O failure and filled my syslog with that error. The second 3TB was not spinning stopped at 50% into the pre-read. I tried spinning it up it worked for about 10 seconds and myMain indicated it had stopped again. Stopped the preclear (and it was writing zero's to the other drives already - UGH1) on all the other drives and shutdown (10 Minutes to save the syslog). I changed the sata6 cables to those two drives and rebooted board would not detect one of the 3TB and I was not taking a chance on the other. I just got them yesterday so I hope I can replace them at the store instead of with WD. Glad they were on sale for 188CDN each. I am glad this is just in testing stage.
rgds,
Dave
-
Just finshed the first cycle pre-clear on a new wd 3TB EZRX 6Gb sata drive with no issues. The total process on my new Asus F1A75-V Pro with the new A6-3500 APU took 36 Hours.
Here is the pre-clear report if there is anything you guys notice that I do not let me know please. I am running 5b14 as well.
========================================================================1.13 == invoked as: ./preclear_disk.sh /dev/sdb == WDC WD30EZRX-00MMMB0 WD-WCAWZ1395560 == Disk /dev/sdb has been successfully precleared == with a starting sector of 1 == Ran 1 cycle == == Using :Read block size = 8225280 Bytes == Last Cycle's Pre Read Time : 9:00:00 (92 MB/s) == Last Cycle's Zeroing time : 9:05:58 (91 MB/s) == Last Cycle's Post Read Time : 18:07:33 (45 MB/s) == Last Cycle's Total Time : 36:14:32 == == Total Elapsed Time 36:14:32 == == Disk Start Temperature: 28C == == Current Disk Temperature: 36C, == ============================================================================ ** Changed attributes in files: /tmp/smart_start_sdb /tmp/smart_finish_sdb ATTRIBUTE NEW_VAL OLD_VAL FAILURE_THRESHOLD STATUS RAW_VALUE Temperature_Celsius = 116 123 0 ok 36 No SMART attributes are FAILING_NOW 0 sectors were pending re-allocation before the start of the preclear. 0 sectors were pending re-allocation after pre-read in cycle 1 of 1. 0 sectors were pending re-allocation after zero of disk in cycle 1 of 1. 0 sectors are pending re-allocation at the end of the preclear, the number of sectors pending re-allocation did not change. 0 sectors had been re-allocated before the start of the preclear. 0 sectors are re-allocated at the end of the preclear, the number of sectors re-allocated did not change. ============================================================================
Here is the preclear finish report.
Disk: /dev/sdb smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD30EZRX-00MMMB0 Serial Number: WD-WCAWZ1395560 Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jan 9 22:15:00 2012 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (49980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 176 021 Pre-fail Always - 8158 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 35 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 16 194 Temperature_Celsius 0x0022 116 110 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Dave
-
forget this - I solved the issue.
Regards,
Dave
-
Hey all,
I am playing around with LinuxMCE and it has it's own DHCP built in to service it's client on the internal lan. Well my unraid server is on My Windows network inside my dlink routers scope and I was wondering is it possible to install a 2nd nic in the server and configure that nic with a different ip in a different subnet. Basically it would be serving to sub-nets.
Preclear.sh results - Questions about your results? Post them here.
in User Customizations
Posted
I just finished a pre clear on a Seagate 3TB same drive as johnm's post above, I though I would post the values as a comp.
thx for a great script Joe.
Dave