ftrees
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by ftrees
-
-
1 hour ago, dlandon said:
UD doesn't have a numeric limit to the number of drives, but there is a practical limit you've surely exceeded. UD is polling disk drives for status like size, used, and free every three seconds to refresh the display. UD will not be able to keep up with 110 drives and maintain a responsive GUI as you've seen.
Why do you have 110 unassigned drives? If you have that much storage requirement, you need to build a personal data center.
Is it possible to change the polling frequency? I want to set them as permanent disks essentially for Chia farming - I have another Unraid Server for VMs/Plex etc. Ideally I'd like to keep all of the farming drives on one server using the Machinaris docker - but perhaps I'd be better off to install linux. Or is there an option to disable the GUI/polling and just manage them as connected disks?
-
What is the limit in number of drives I can use with UAD? I have 110 working, but plugin is slow to load details in GUI (takes around 30-60seconds). I attempted to add another 24-bay jbod, and now it seems to be crashing with 100% CPU load, and mount/unmount not working, format not working, unable to change mount points, etc. Any change hits 100% CPU (on 58 cores) and takes 3+ min to load in gui.
-
Got it to install (must save, then install). Opened terminal and navigated to that directory. Get error “controller: command not found”
nvm- need command first: sudo hpsscli
-
3 hours ago, trurl said:
I wouldn't use it. The pending can become reallocated but too many either way.
https://wiki.unraid.net/UnRAID_6/Storage_Management#Normal_replacement
Thanks for the advice and the link! once the replacement drive arrives I'll get it added as a replacement, and then run 3 full preclear cycles to confirm its trash as jonathanm suggested. I was hoping it would have some value for resell at the least... I guess I could list it on eBay for parts only with the smart report and let someone make that choice. I don't want to trust it in my array though
-
Thanks! I've ordered a replacement drive - now I'll just need to do some reading on how to swap out the old for the new.
Current Pending Sector errors mean drive will die completely soon? or just that it will not work to rebuild in this type of arrary?
(drive worth using for any other use case? or is it basically trash?)
Parity sync should complete in 10 hours, then I'll run full diagnostic and post
-
I'm brand new to UNRAID, 10-days into a trial. I have 2 new 8TB drives, and 2 older 8TB drives from around 3 years ago currently in my array with 1 10TB parity drive. I'm getting an alert on 1 of the disks, and from search it looks like it may be a serious issue. Please see full SMART report below... I'm currently filling the arrary with data from my backup - and fixed the drive temp issue with a case mod.
Need guidance please!
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===
Model Family: Seagate Archive HDD
Device Model: ST8000AS0002-1NA17Z
Serial Number: Z840HT49
LU WWN Device Id: 5 000c50 0911924a8
Firmware Version: RT17
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5980 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Sep 23 12:31:04 2020 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 925) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x30b5) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 118 099 006 - 168442512
3 Spin_Up_Time PO---- 090 090 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 478
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 081 060 030 - 158052475
9 Power_On_Hours -O--CK 075 075 000 - 21986
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 54
183 Runtime_Bad_Block -O--CK 097 097 000 - 3
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 084 084 000 - 16
188 Command_Timeout -O--CK 100 096 000 - 8
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 069 043 045 Past 31 (0 73 35 30 0)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 949
193 Load_Cycle_Count -O--CK 096 096 000 - 9833
194 Temperature_Celsius -O---K 031 057 000 - 31 (0 10 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 118 099 000 - 168442512
197 Current_Pending_Sector -O--C- 091 091 000 - 3248
198 Offline_Uncorrectable ----C- 091 091 000 - 3248
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 3
240 Head_Flying_Hours ------ 100 253 000 - 7854 (191 118 0)
241 Total_LBAs_Written ------ 100 253 000 - 50080216735
242 Total_LBAs_Read ------ 100 253 000 - 116521342260
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warningGeneral Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 8 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 8 Write stream error log
0x22 GPL R/O 8 Read stream error log
0x24 GPL R/O 512 Current Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 24 Device vendor specific log
0xa2 GPL VS 8160 Device vendor specific log
0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 9048 Device vendor specific log
0xbe-0xbf GPL VS 65528 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 16 Device vendor specific log
0xd1 GPL VS 80 Device vendor specific log
0xd3 GPL VS 1920 Device vendor specific log
0xda GPL,SL VS 8 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data TransferSMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 16
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 16 [15] log entry is empty
Error 15 [14] log entry is empty
Error 14 [13] log entry is empty
Error 13 [12] log entry is empty
Error 12 [11] log entry is empty
Error 11 [10] log entry is empty
Error 10 [9] log entry is empty
Error 9 [8] log entry is empty
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 30/35 Celsius
Lifetime Min/Max Temperature: 10/57 Celsius
Under/Over Temperature Limit Count: 0/0SCT Temperature History Version: 2
Temperature Sampling Period: 3 minutes
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (98)Index Estimated Time Temperature Celsius
99 2020-09-18 07:01 47 ****************************
100 2020-09-18 08:00 46 ***************************
101 2020-09-18 08:59 46 ***************************
102 2020-09-18 09:58 ? -
103 2020-09-18 10:57 27 ********
104 2020-09-18 11:56 ? -
105 2020-09-18 12:55 26 *******
106 2020-09-18 13:54 43 ************************
107 2020-09-18 14:53 50 *******************************
108 2020-09-18 15:52 50 *******************************
109 2020-09-18 16:51 51 ********************************
110 2020-09-18 17:50 51 ********************************
111 2020-09-18 18:49 43 ************************
112 2020-09-18 19:48 41 **********************
... ..( 6 skipped). .. **********************
119 2020-09-19 02:41 41 **********************
120 2020-09-19 03:40 ? -
121 2020-09-19 04:39 29 **********
122 2020-09-19 05:38 ? -
123 2020-09-19 06:37 28 *********
124 2020-09-19 07:36 ? -
125 2020-09-19 08:35 36 *****************
126 2020-09-19 09:34 41 **********************
127 2020-09-19 10:33 41 **********************
0 2020-09-19 11:32 42 ***********************
1 2020-09-19 12:31 41 **********************
... ..( 13 skipped). .. **********************
15 2020-09-20 02:17 41 **********************
16 2020-09-20 03:16 40 *********************
... ..( 4 skipped). .. *********************
21 2020-09-20 08:11 40 *********************
22 2020-09-20 09:10 45 **************************
23 2020-09-20 10:09 50 *******************************
24 2020-09-20 11:08 ? -
25 2020-09-20 12:07 38 *******************
26 2020-09-20 13:06 ? -
27 2020-09-20 14:05 36 *****************
28 2020-09-20 15:04 28 *********
29 2020-09-20 16:03 28 *********
30 2020-09-20 17:02 28 *********
31 2020-09-20 18:01 29 **********
32 2020-09-20 19:00 28 *********
33 2020-09-20 19:59 28 *********
34 2020-09-20 20:58 29 **********
35 2020-09-20 21:57 28 *********
36 2020-09-20 22:56 28 *********
37 2020-09-20 23:55 29 **********
38 2020-09-21 00:54 29 **********
39 2020-09-21 01:53 28 *********
40 2020-09-21 02:52 27 ********
... ..( 6 skipped). .. ********
47 2020-09-21 09:45 27 ********
48 2020-09-21 10:44 28 *********
... ..( 3 skipped). .. *********
52 2020-09-21 14:40 28 *********
53 2020-09-21 15:39 29 **********
... ..( 2 skipped). .. **********
56 2020-09-21 18:36 29 **********
57 2020-09-21 19:35 31 ************
58 2020-09-21 20:34 31 ************
59 2020-09-21 21:33 30 ***********
60 2020-09-21 22:32 30 ***********
61 2020-09-21 23:31 29 **********
62 2020-09-22 00:30 29 **********
63 2020-09-22 01:29 29 **********
64 2020-09-22 02:28 30 ***********
... ..( 7 skipped). .. ***********
72 2020-09-22 10:20 30 ***********
73 2020-09-22 11:19 29 **********
... ..( 4 skipped). .. **********
78 2020-09-22 16:14 29 **********
79 2020-09-22 17:13 ? -
80 2020-09-22 18:12 34 ***************
81 2020-09-22 19:11 34 ***************
82 2020-09-22 20:10 35 ****************
83 2020-09-22 21:09 35 ****************
84 2020-09-22 22:08 34 ***************
... ..( 5 skipped). .. ***************
90 2020-09-23 04:02 34 ***************
91 2020-09-23 05:01 33 **************
92 2020-09-23 06:00 32 *************
93 2020-09-23 06:59 31 ************
... ..( 4 skipped). .. ************
98 2020-09-23 11:54 31 ************SCT Error Recovery Control command not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 54 --- Lifetime Power-On Resets
0x01 0x010 4 21986 --- Power-on Hours
0x01 0x018 6 50155789730 --- Logical Sectors Written
0x01 0x020 6 149177905 --- Number of Write Commands
0x01 0x028 6 116655189179 --- Logical Sectors Read
0x01 0x030 6 497436643 --- Number of Read Commands
0x01 0x038 6 - --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 4113489040 N-- Spindle Motor Power-on Hours
0x03 0x010 4 4113469003 N-- Head Flying Hours
0x03 0x018 4 9833 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 31 N-- Current Temperature
0x05 0x010 1 31 N-- Average Short Term Temperature
0x05 0x018 1 29 N-- Average Long Term Temperature
0x05 0x020 1 57 N-- Highest Temperature
0x05 0x028 1 10 N-- Lowest Temperature
0x05 0x030 1 46 N-- Highest Average Short Term Temperature
0x05 0x038 1 8 N-- Lowest Average Short Term Temperature
0x05 0x040 1 41 N-- Highest Average Long Term Temperature
0x05 0x048 1 0 N-- Lowest Average Long Term Temperature
0x05 0x050 4 33 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 13 --- Specified Minimum Operating Temperature
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized valuePending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
[Support] Machinaris - Chia cryptocurrency farming + Plotman plotting + Unraid WebUI
in Docker Containers
Posted · Edited by ftrees
UPDATE
I just updated to new version and have ~50% of partials reporting stale and SpacePool is showing estimated size around 15% of my actual space. Never had an issue previously, haven't changed anything else (no compressed plots etc). Any idea on what I should check? Client showing all plots and lookup times around 1 second in log.
on 11/11 for 6 hours it shows 34,000 valid partials, 0 stale. In the last 6 hours I show 3,400 valid 4,400 stale.
UPDATE - Overnight everything went back to normal on its own?!