[Physical NICs to respective containers]

Trying to get some containers their own IP dresses and i can't seem to be able to figure out a way to do it.  ipvlans break my unifi network and macvlans break my unraid. 

 

I was able to get a container on a separate vlan all together without any issues.  However, using the same methodology doesn't yield the same result without creating a different network for the respective NICs.  In other words, i'm trying to setup 2 NICs for 2 different containers in docker that are on the same network as "br1".  The following steps were done so far:

 

Settings -> network -> eth 2 & eth 3 -> Enable Bonding no -> enable bridging yes -> IPV4 assignment No

 

settings -> docker;

 

Docker custom network type: ipvlan

Host access to custom networks: Disabled

Preserve user defined networks: No

IPv4 custom network on interface br0:

Subnet: 192.168.1.0/27 Gateway: 192.168.1.1 DHCP pool: not set

IPv4 custom network on interface br1:

Subnet: 192.168.40.0/27 Gateway: 192.168.40.1 DHCP pool: not set

IPv4 custom network on interface br2:

Subnet: 192.168.1.0/27 Gateway: 192.168.1.1 DHCP pool: not set

IPv4 custom network on interface br3:

Subnet: 192.168.1.0/27 Gateway: 192.168.1.1 DHCP pool: not set

 

When i select to container, only custom network br0  and br1 show, the other 2 aren't an option. 

 

Any way of doing this?