[how to Manual upgrade to 6.9 rc1]

 it was very slow to download https://s3.amazonaws.com/dnld.lime-technology.com/next/unRAIDServer-6.9.0-rc1-x86_64.zip  when i use unRAIDServer.plg to   upgrade 6.9 rc1 ,can i manual download unRAIDServer-6.9.0-rc1-x86_64.zip  and put it into somewhere in unraid ,and use  unRAIDServer.plg to upgrade unraid?

[Does this operation lose data?]

8 hours ago, itimpi said:

If you assign a drive to a parity protected array then the first action that Unraid will take is to ‘clear’ the drive (by writing zeroes to every sector of the drive) to keep parity valid.  This will erase any existing content and leave the drive ready to be formatted to the file system you choose (auto means use the default setting).  From your description this is what has happened.   

 

If you assign a drive to a parity-protected array, the first action Unraid will take is to “clean” the drive (by writing Zeros on each sector of the drive) to keep the parity valid. This deletes any existing content and prepares the drive for formatting to the file system of your choice (which automatically means using the default settings) . According to your description, that’s what happened.

new HDD is disk3 had gitlab-ce docker data

old HDD is disk2 also had gitlab-ce docker data.

when i put new HDD into array，and start ,parity found new HDD has gitlab-ce data and move it into disk2..

i think that cost my data lost...

 

[Does this operation lose data?]

9 hours ago, itimpi said:

How did you add the drive after moving it?  It should have showed up just fine in Unassigned Devices with its data intact.   If you tried to add it to the array or to an existing cache pool then the data could well be lost  as those actions expect the disk to not contain any data you want to keep.

tks for reply ,my unraid A is 6.8.2 ，and when i put the HDD Into unraid b( 6.9.0 beta35), HDD Is unassigned ,and i assign it to a disk3,  the HDD fs show "auto", and i also have a 4T parity hdd on unraid b, when a start array , unraid seem to move data. after that , unraid b tell me format HDD ,i do that。 HDD fs became “xfs”.and ，i lost my  gitlab-ce data on unrad B disk1...😂

[Does this operation lose data?]

hi all:

  i have two unraid server ,today , i get one HDD from unraid A and put it into unraid B. this HDD contain a docker data with gitlab-ce ,unraid B also has a gitlab-ce data in appdata .when i start unraid B, i found The gitlab-ce data on unraid B losted and became gitlab-ce data on unraid A ,and i cant found the lost data.. dose it unsafe move A HDD from a unraid to another one ?

 

[准备放弃unraid了，说说半年来为何最终放弃这个nas系统！]

我也没发装CA 家里的电信网络不行，公司的网通就毫无问题，后来终于搞好了

首先设置host

echo "# GitHub Start" >> /etc/hosts
echo "52.74.223.119 github.com" >> /etc/hosts
echo "192.30.253.119 gist.github.com" >> /etc/hosts
echo "54.169.195.247 api.github.com" >> /etc/hosts
echo "185.199.111.153 assets-cdn.github.com" >> /etc/hosts
echo "199.232.68.133 raw.githubusercontent.com" >> /etc/hosts
echo "151.101.108.133 user-images.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 gist.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 cloud.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 camo.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars0.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars1.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars2.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars3.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars4.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars5.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars6.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars7.githubusercontent.com" >> /etc/hosts
echo "151.101.76.133 avatars8.githubusercontent.com" >> /etc/hosts

 

然后

替换CA的include的paths.php 用国内的CDN源，记得chmod +x

 

docker镜像去阿里云免费搞个镜像源

 

最后下载userscript，自己搞个脚本

array第一次启动的时候把以上的事情做一遍。。

搞好后下载docker查docker images 湿滑。。。

 

不过unraid文档的确太垃圾，我现在还在爬怎么写插件的。。真是连个统一的文档都没有，整的和小作坊一样。。

 

paths.php