DrMucki

July 8, 2022

Hier sind die Einstellungen….

July 6, 2022

Hallo zusammen

ich hab das gleiche Problem, komme aber nicht weiter (OS 6.10.2). Das device (eine USB HDD) wird remounted unter /mnt/disks/WD_Elements_2620 , darunter kann ich auch die Datenfreigabe durchsuchen, aber einen SMB share bekomme ich nicht hin. Es steht auch nur einmal "Mount" da und zwar bei dem Device, nicht aber bei der wohl automatisch gemounteten partition (Exfat)

was mache ich falsch?

March 7, 2021

sorry for the question... but how to change the bios within Unraid for the vm... it only gives me OVMF...

March 7, 2021

Thanks a lot. I will give it a try and will post the results here. How did you manage to extract the vbios? Can you explain it to us here. A step by step how to could be useful, even for those who come will find this post here

March 7, 2021

1 hour ago, CodingMicrobe said:

@DrMucki also why use Splashtop? Can you try just plugging in an HDMI/VGA/DP cable directly to your motherboard to see if you get output from iGPU Windows VM - without Splashtop at all? That can help narrow down if the issue is with Splashtop & AMD iGPUs, or with the passthrough itself.

It is a headless system... there is no Mouse/keyboard or even a monitor.... Just SSH and web....I will give it a try with the monitor within the next days.. I have to completely remove the system. which is within a server rack... but not today anymore and with this I can go the latest bios as well

March 7, 2021

1 hour ago, CodingMicrobe said:

So it sounds like you got it working, but it was very very poor performance, with poor resolution and lag on keyboard/mouse inputs?

What specific motherboard & BIOS version do you have? I can extract the VBIOS from that version of the BIOS for you. Maybe there is a newer version.

Yeah that is right.

i have a ASUS PRIME A520M-K.

Unraid gives the following Infos:

ASUSTeK COMPUTER INC. PRIME A520M-K, Version Rev X.0x
American Megatrends Inc., Version 1401
BIOS dated: Fri 04 Dec 2020 12:00:00 AM CET

I know that there is a newer bios but I did not install it so far

March 7, 2021

Thank you.

I am just trying to get it to work with your bios...

What I did so far...

Set up a Win 10 VM which is working with VNC or with a AMD GPU.

For the AMD GPU and the iGPU Part and their sound part are both bound to VFIO..

First tried the VNC --> Working with all resolutions

tried my GPU with my extracted Vbios... working perfectly

changed to AMD Renoir with your bios... first I got an error in the log file. Started it with no changes a second time...

no Errors are shown.. and yeah Splashtop connects... windows login screen is coming up (ugly resolution, black and white). You can log onto it and it takes ages to show a screen.

Ok its color but the resolution.... and there it comes it very very laggy on keyboard or even. mouse inputs . I was not able to interact with the machine at all....

May be you can tell me how you extracted the bios... I will give it a try on mine 4650g...

March 7, 2021

9 hours ago, CodingMicrobe said:

Have you checked this post out? That message (type 127) seems to be an AMD thing when the GPU can't reset properly: https://forums.unraid.net/topic/76510-execution-error-internal-error-unknown-pci-header-type-127/

EDIT: it may be possible to extract iGPU VBIOS with UEFITool, but I believe this is Windows-only (unsure, just found this online), see https://github.com/LongSoft/UEFITool/issues/26

EDIT2: I think I got the Renoir APU VBIOS, I will PM you and if it works, I'll make it public.

I would really appreciate your APU Vbios for the 4650.. can you post it here of send it to me via PN... on which unraid version are you? Did you get it to passthrough for windows VM or even with macinabox?

how did you manage to get it? I tried to use the tool of Spaceinvader one, but that did not work...

February 21, 2021

4650g doesn’t work so far. I added a AMD GPU... but that only works in windows so far

February 14, 2021

Ok once again: here the solution: but as I told before: use the search function or click on my name, than you will see my posts...there is the solution... copied it for you here.... because me was helped as well here..

The problem is, that when you switch back from gpu to VNC add using the Macinabox helper script, the bus from the vnc is not

set correctly.

To fix it do the following:

After switching back from Gpu to VNC and running the helper script, go to your vm setting of your vm and Open the XML view (right corner there is a switch Form view).

scroll nearly to the end.

You have to change the XML in this part:

</graphics>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
<address type='pci' domain='0x0000' bus='0x06' slot='0x01' function='0x0'/>

for me worked

CHANGED to bus='0x00' slot='0x02' function='0x0'
</video>
but you must not run the Helper script afterwards.

February 14, 2021

7 hours ago, steve1977 said:

I am facing the same issue. Everything used to work well. Then switched back to VNC and I am getting the error above. And after switching back to GPU-passthrough, it no longer works. Used the script a few times both with and without GPU. But no luck!

Any ideas?

I think I answered the question with the issue switching back to VNC several times here, when the display says: guest Display not initialized... the script changes the bus for the video in vnc the wrong way. You have to set it back manually in the xml after you run the script.

if you want to know exactly how, please just use the search function within this forum please. I do not have it here now...

Marc

January 18, 2021

The problem is, that when you switch back from gpu to VNC add using the Macinabox helper script, the bus from the vnc is not

set correctly.

To fix it do the following:

After switching back from Gpu to VNC and running the helper script, go to your vm setting of your vm and Open the XML view (right corner there is a switch Form view).

scroll nearly to the end.

You have to change the XML in this part:

</graphics>
<video>
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/>
<address type='pci' domain='0x0000' bus='0x06' slot='0x01' function='0x0'/>

for me worked

CHANGED to bus='0x00' slot='0x02' function='0x0'
</video>
but you must not run the Helper script afterwards.

January 18, 2021

Hi maybe I can help you with returning to VNC.. does the VNC say that guest display is not initialized....? But I also having trouble enabling my amd gpu...

January 9, 2021

Sorry about what? I mean in the Bios of my mainboard , I did not find any option to change between UEFI and legacy there in the bios. I think it is UEFI.

Unraid is defintely in UEFI mode (checked it within the syslinux config).... just checked my Windows VM with it, still works fine with passthrough. May be we can find out there anything?? I also got the radeon software installed, may be we get some needful information there??

Would a dummy HDMI Plug help here?

I was just wondering, because my windows VM was not accepting resolutions higher than 1600x1200

January 9, 2021

25 minutes ago, ghost82 said:

mmm..ok thanks for the logs..

First: can you check if the R7 370 is uefi compatible?

In other words, if you force the bios to boot in uefi mode instead of legacy bios does the R7 works?

If your R7 supports uefi mode, then make sure to boot unraid in uefi mode (go into your unraid settings to allow uefi boot).

I did not bother before about UEFI and legacy... so everything was set to UEFI when setting up. Unraid is already booting in UEFI Mode and in windows VM the GPU passthrough works. Should I switch to legacy, but how to do it........ IN the morning I had a quick look to my bios of the motherboard (ASUS) but I did not find anything to change there...

January 9, 2021

16 hours ago, ghost82 said:

Opencore is compiled into 2 versions: debug and release.

Macinabox includes the release version.

Debug version should be used when issues appear, because by changing the key "Target" to 83 in the config.plist, you will be able to log to a file all of the things the bootloader is doing, saved in the root of the efi partition.

The release version is able to log too, but with less information saved.

I don't know which release version macinabox includes, maybe 0.6.4: if you go to github.com/acidanthera/opencorepkg and you click on "releases" on the right of the page, you can download the precompiled "debug" version and replace the files in the efi, then changing Target to 83 will let you save to a log file.

Ok, did that at installed the debug version (replaced the files mentioned here https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/debug.html and followed the instructions)

finally I was able to create some log files.

For comparison I created the 3 files:

1st: (VNC): I started up the VM with the standard config.plist without any changes (except the ones for the logging)

2nd(VNC with new config): I changed the config.plist while adding the part in Device Properties and booted up with this in VNC Mode

3rd (GPU with new config): I modified the VM (added GPU and vbios) run helper script and started the VM.

4th(VNC Spoofed GPU). I modified the VM Back to VNC and added the config.plist with the Spoofed GPU mal part, deleted the APCI part which was added in 2)

5th (GPU spoofed). Added the GPU with VBIOS and started again...

I looked throughout them and. th 3rd and the 5th one are complaining about missing compatible GOP.

Googling around with missing GOP and R7-370 didn't get me any hints

opencore-2021-01-09-101113(VNC).txt opencore-2021-01-09-103445(VNC with new config).txt opencore-2021-01-09-103843(GPU with new config).txt opencore-2021-01-09-121610(VNC spoofed GPU).txt opencore-2021-01-09-124847(GPU spoofed).txt

January 8, 2021

29 minutes ago, ghost82 said:

If it didn't work I would not have too much hope..I'm afraid but I'm out of ideas

If you can replace opencore files with that of a debug version and obtain a full log of a gpu failure maybe we will have some for info to evaluate..

it's ok... I wasted many hours of your time...... and mine... but if I will not work I will give it up.

I am trying to get from 0x0,0x0 to 0x5, 0x5 with all combinations and than I will stop it.

I always have to wait for 60 sec to get the VM a chance to come up..

with vnc I get a response after 30 sec..

What do you mean with "f you can replace opencore files with that of a debug version and obtain a full log of a gpu failure maybe we will have some for info to evaluate.." I need a little help with it..

google was not so helpful.

Otherwise may be you have suggestion for a GPU for max 150 Euros, which will work out of the box 🙂

I am sorry for not being as smart as you with these things. BTW where are you from? seems to be the same time zone 🙂 as here in Germany

January 8, 2021

2 hours ago, ghost82 said:

Should be fixed now, you messed the DeviceProperty section.

config.plist 20.83 kB · 2 downloads

Thank you with this file OC shows no error (of cause :-)). I went back went the GPU and tested

(0x1, 0x4) and the numbers from 0-5 at the last position..

now going on to check 0x2, 0x0...

what numbers are logical to test I mean the first an the second part....

0xa,0xb. (where a and b are ini which range) to ask mathematically---

January 8, 2021

1 hour ago, ghost82 said:

It should only apply to vnc display.

ok. So the only way to check if the machine starts is Teamviewer coming up , right?

I edited the config.plist, but I think I misunderstood you somewhere

First I checked it with vnc without gpu, machine was starting but when opening with OC it complained about the config.plist when opening it

"OpenCore Configurator was unable read because it isn’t in the correct format.

Please fix the following code before saving: Found non-key inside <dict> at line 212"

I did not manage to fix it...maybe I forgot something or added wrongly. Would you mind having a look to my edited config.plist please?

Thought I had to check my config before adding the GPU...

config.plist

January 8, 2021

1 hour ago, ghost82 said:

no problem take your time and check carefully the code: please note that I edited the code of DeviceProperty because of an error, so refresh the page and check.

Before i will start with it i got a further question

when changing from VNC to passthrough back to VNC the following in the XML gets wrong after the script:

It leads "the Guest has not initialized the display yet error"

changing the red part to: bus='0x00' slot='0x02" fixes the problem...

when swapping to GPU XML changes like this

I am just wondering if this error also occurs, when changing to gpu and i cannot see it, beacuse i do not have vnc... and it stucks somewhere there.....

What do you think

January 8, 2021

1 hour ago, ghost82 said:
Otherwise try to inject spoofed device-id property with config.plist only, without ssdt.

You could add the following snippet of code in the DeviceProperties-->Add in the config.plist:
		<dict>
			<key>PciRoot(0x1)/Pci(0x1,0x4)/Pci(0x0,0x0)</key>
			<dict>
				<key>device-id</key>
				<data>10680000</data>
			</dict>
		</dict>
So that it becomes:
	<key>DeviceProperties</key>
	<dict>
		<key>Add</key>
		<dict>
			<key>PciRoot(0x1)/Pci(0x1F,0x0)</key>
			<dict>
				<key>compatible</key>
				<string>pci8086,2916</string>
				<key>device-id</key>
				<data>FikA</data>
				<key>name</key>
				<string>pci8086,2916</string>
			</dict>
			<key>PciRoot(0x1)/Pci(0x1,0x4)/Pci(0x0,0x0)</key>
			<dict>
				<key>device-id</key>
				<data>10680000</data>
			</dict>
		</dict>
Here comes another problem...as you can see I wrote the gpu address as PciRoot(0x1)/Pci(0x1,0x4)/Pci(0x0,0x0)

but this is MY gpu address, because I found it in ioreg with the gpu attached...But how can you know your gpu address if the gpu is not attached?

By guessing?

All we know is that the gpu will be under a bridge in qemu: the PciRoot(0x1) is OK, what may change is the second address Pci(0x1,0x4): this corresponds to [email protected],4

I would try in order:

Pci(0x1,0x4)

Pci(0x1,0x1)

Pci(0x1,0x2)

Pci(0x1,0x3)

Pci(0x1,0x5)

Not sure about the lat path Pci(0x0,0x0) if it can change or not...probably not..

Sorry, I know there are a lot of variables to test...

I tried the other aml... with no success will go on with the other method withoud SSDT...

Just to get it right...... I will boot in VM, restore my old config, add the code snippet in config.plist add gpu and restart....

I think it could be a good idea to mount the disk in unraid terminal, modify the config.plist there and try it this way. So i do not have to restart the vm in vnc to do the changes there....

<key>PciRoot(0x1)/Pci(0x1,0x4)/Pci(0x0,0x0)</key> the red part is the part to change... right?

January 8, 2021

15 minutes ago, ghost82 said:

I'm not sure, this is the main issue!

The hamletic question is: how can you check for the device path if the device is not attached?

This is why in my last reply I wrote "by guessing"...

If I were you, I would try the DeviceProperty Add:
https://forums.unraid.net/topic/84601-support-spaceinvaderone-macinabox/?do=findComment&comment=932679

without messing with the SSDT

Thank you. I will give it a try.... plz stand by 🙂 this will take a while....

Doing this while in homeoffice.... but now breakfast....

January 8, 2021

I just trief

55 minutes ago, ghost82 said:

Hi, I'm not sure it will work, just think at it about what may be wrong.

First of all, make a backup of all if you have important data, so you don't have to spend time to restore all if something goes wrong.

OK

OK, how did you find it?linux or windows?Here my first doubts about the acpi path, I'm not sure it's ok, since we are using qemu but we are applying a method for a real hackintosh, but let's take as it for now.

I did it on the unraid server using the terminal...

55 minutes ago, ghost82 said:
Here I'm sure, there's an error: your actual device-id is 0x6811 but you need to spoof it, otherwise injecting this ssdt will result as if not injecting; change it to 0x6810 --> the "X" equivalent of your card (attached files).

OK

OK

OK, I'm not a fan of opencore configurator, but the config.plist is correctly modified:
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Enabled</key>
				<true/>
				<key>Path</key>
				<string>SSDT-GPU-SPOOF.aml</string>
			</dict>
Just to make sure: mount the efi, go to \EFI\OC\ACPI and check if SSDT-GPU-SPOOF.aml is in this folder with all the other aml files.

OK

Let's hope is only due to wrong spoofed device-id..

SSDT-GPU-SPOOF.dsl 1.86 kB · 0 downloads SSDT-GPU-SPOOF.aml 261 B · 0downloads

I just copied your aml file to the efi folder unmounted and rebooted....

Am i doing correct... I always switch back to vnc, booting back the vm, do the changes in OC, powering down Vm, edit the VM to passthrough with vbios, helper script, starting the machine... but than the only way is Teamviewer to check... and this is not coming up again so with your 1st file nu success

.Where to check whether the path is correct? Can i do this within the vm ( i dont think so because im not getting i the vm with the card passing through)

Meanwhile I will try the other file you provided... Thanks for your help so far....

January 7, 2021

4 hours ago, ghost82 said:

Otherwise you need to mount your img vdisk, and mount the efi inside that img, mount the downloaded opencore.img and overwrite the files from opencore.img to the efi.

Or if you are passing through a physical disk, mount the efi partition of that disk, mount the downloaded opencore.img and overwrite the files from opencore.img to the efi.

Opencanopy is only hidden, if you press esc button it will show, if the system it's still able to reach the boot picker..

Just started from scratch and the vm is working again. I also got it managed to mount the disk, but this ended up with a stable apple logo... so start from scratch looks only an hour .....

But I did not get it managed to get it started with the amd passing through.

Here is what I did, for trying it to get to work:

1. found the Device ID from my GPU: Device: Curacao PRO [Radeon R7 370 / R9 270/370 OEM] [6811]

2. discovered the firmware path:

cat /sys/bus/pci/devices/0000:01:00.0/firmware_node/path

\_SB_.PCI0.GPP0.X161

3. Edited the provided SSDT-GPU-SPOOF.dsl file

a) changed the firmware path , wherefore I changed twice the "EXTERNAL" and the "Scope"

changed the spoofed "device id" to 0x11 , 0x68 and renamed the model

(Did I forget anything here or did I make a mistake? I provided the file at the end...)

3. Downloaded MaciASL and double clicked my .dsl file and saved it as aml file

4. opened Openconfigurator and mounted the partition and opened it. Looked for the config.plist and double clicked it to open it with OC

5. On the first page I saw several aml files, so I dragged and dropped my aml. file here and saved the config.plist, and unmounted the partition (I am not sure for this step, so I decided to do as described, may be it is wrong....)

6. Did a shutdown and started the vm again... I did not change anything in the VM , because I want to see if the VM comes up. It does and it started without any problems. Teamviewer starts up automatically and I was able to get in via TeamViewer . OK Shut Down....

7. Edited the VM: changed graphics to AMD Radeon, added VBIOS, Saved changes, runned helper script and started the VM again. VM is starting but no possibility to get in via TeamViewer

8. changing back to VNC (after editing the known bug in the xml file..) brings back the machine... but with no amd-

What am I doing wrong?

Thank you for your help!

SSDT-GPU-SPOOF.aml SSDT-GPU-SPOOF.dsl config.plist config.original.plist

January 7, 2021

20 hours ago, ghost82 said:

There should be, but not so easy.

As described by dortania you should spoof the id of your R7 370: R7 370 is listed as compatible with latest mac os but needs fakeid and maybe the -raddvi boot arg.

https://dortania.github.io/GPU-Buyers-Guide/modern-gpus/amd-gpu.html#r7-r9

Basically, you need to get the acpi address of your gpu, modify the source code of ssdt (.dsl file) template available at dortania, compile with maciasl, or iasl or anything else able to compile dsl files (--> .aml file) and inject this compiled ssdt with opencore.

https://dortania.github.io/Getting-Started-With-ACPI/Universal/spoof.html

i totally messed up my config.plist

the vm is not booting anymore. I got a copy of my old config.plist, but i don't now how to mount the proper image and where it is....

I don't get into the boot menu, because i configured it in opencore to boot directly into the image....

Any help appreciated

DrMucki

Posts

Joined

Last visited

Content Type

Profiles

Forums

Downloads

Store

Gallery

Bug Reports

Documentation

Landing

Posts posted by DrMucki

Unassigned Device (USB HDD) als Share einbinden

Unassigned Device (USB HDD) als Share einbinden

Help requested for AMD Ryzen 5 Pro 4650g Passthrough

Help requested for AMD Ryzen 5 Pro 4650g Passthrough

Help requested for AMD Ryzen 5 Pro 4650g Passthrough

Help requested for AMD Ryzen 5 Pro 4650g Passthrough

Help requested for AMD Ryzen 5 Pro 4650g Passthrough

Help requested for AMD Ryzen 5 Pro 4650g Passthrough

Help requested for AMD Ryzen 5 Pro 4650g Passthrough

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox

[Support] SpaceinvaderOne - Macinabox