[Cannot USB boot anymore since hardware change]

12 minutes ago, Vr2Io said:

 

 

 

I suggest you redo this step, don't use USB creator,  format it in FAT32, copy all file and execute make_bootable.bat ( i.e. Windows command prompt ) .... this is official method when no USB creator program.

 

5 minutes ago, Vr2Io said:

Pls also try raise USB-ZIP higher then USB-HDD

no on both accounts unfortunately

[Cannot USB boot anymore since hardware change]

No, I dont think so, it's pretty basic and 12 years old.

 

I'll put some BIOS pics up shortly, see if you can see something I cannot., Thanks

[Cannot USB boot anymore since hardware change]

I can boot from USB if the USB sticks have only memtest86 on them, BIOS seems perfectly happy to do that.

 

When configured to Boot with UNRAID on them....nothing

 

[Cannot USB boot anymore since hardware change]

Well the scandisk USB stick didn't work either

 

Must just be some really annoying and illogical quirk.

 

All memtest configured USB sticks boot in the new server

None of those sticks configured with UNRAID will boot in the new server.

But all of those usb sticks will boot other PC's into UNRAID.

 

So annoying..!!

 

 

[Cannot USB boot anymore since hardware change]

I've ordered a ScanDisk 16GB 2.0 in one last ditch attempt to see if this will try to be recognised to Boot.

 

Failing that, the old hardware is going back in.....

[Cannot USB boot anymore since hardware change]

all USB sticks are 2.0 and all headers are 2.0 / 1.1 only (no 3.0 in sight)

[[SOLVED] About to upgrade MBD -- sanity check!]

Hi, not sure if OP will see this but I am bit behind your curve and tried to migrate to:

Intel core 2 quad - q9550 

Gigabyte G33M-DS2R

8GB DDR2 RAM

 

but my USB from even older hardware server wont attempt to boot at all - were there any strange BIOS settings or quirks to get the G33m to work?

[Cannot USB boot anymore since hardware change]

I'm struggling here and need some assistance please.

I've had a server running for 3 or 4 years mostly for Plex on old PC hardware. skt 775 Core2duo 4Gb Ram Gigabyte G31 mobo and all was well  but I felt the need for more cores and more RAM.

So a minor upgrade ensued...

skt 775 core2 quad 8gb RAM and Gigabyte g33m board (not enormously different one would have thought!)

 

However, 

The same USB stick wont boot or even start to. I've fiddled with every BIOS permutation I can see. It gets stuck at Verifying DMI Pool Data

That USB stick in my PC starts to boot ok, can get to the Unraid menu choice screen. (so USB ok?)

Different USB with memtest86 on boots in server OK (BIOS all set to boot from USB etc fine then)

 

I noticed that Memtest86 configures file to FAT and Unraid USB file creator opts for FAT 32 so I manually created a USB drive with FAT put on UNraid and made it bootable - still no joy.

 

I haven't changed my original USB stick as once I get the hardware read and boot I'm hoping to insert my original USB.

I'm experimenting with fresh Unraid but cannot get it to even start to load.

So I've tried a couple of other USB sticks (16GB Verbatim and 16Gb unbranded) and both work for memtest86 and neither work for Unraid as FAT or FAT32.

 

I've tried with and without HDD attached, no change.

 

In my searches, I've seen some people using same mobo and processor as me so it cant be grossly incompatible.

 

Not sure what else to try and am open to suggestions........

 

Currently about 12 hours banging head against wall and counting

 

TIA