RandomPedestrian
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by RandomPedestrian
-
-
No luck unfortunately. I updated the BIOS (which was admittedly two years outdated), found that one hard drive was dying and downgrading the link to 1.5Gb/s and replaced it, but after a week of it being fine I’m getting the error again.
-
Over the past week I've gotten hundreds of warnings in Unraid saying my Write Cache NVME has been disconnected. A reboot will bring it back up temporarily, but anywhere from a few minutes to a day or two later it's back down again.
I thought it might have been the NVME slot it's in, so I swapped it from slot 2 to 3 with no luck.
Secondly, I replaced the SSD (which is a less-than-year-old Sabrent Rocket 4.0 2TB) with the old CS3030 that it replaced, which I know to be good. Both show up fine in a Windows machine, and the SMART data on both are fine.
Now that drive dropped out today. Going to the attributes tab shows it can't be read, but I don't see any warnings in Unraid yet. Looking at the logs though, there's a ton.
I really hope it's not my motherboard, but that's what I'm leaning toward at this point...
-
13 hours ago, alturismo said:
may take a look at your server and read about "optimized versions" and / or download feature for clients, plex then transcodes and provides these transcoded versions.
No dice unfortunately. Optimized versions list was empty. Tautulli also didn’t have any logs of the movie being transcoded either.
-
I apologize if this has been covered somewhere else, but I've tried on Reddit and on Plex forums and have gotten no answer.
Plex will randomly transcode an entire movie to my /transcode folder (set to /tmp currently) and let it sit there until I manually delete it. When I check the logs, that movie has never been transcoded before at any time, and the movie it's doing it to now hasn't even been played in three years. The movies are always seemingly random too.
I have no idea how to diagnose or fix the issue, and it's caused my server to crash because a 22GB file was eating up almost half my ram.
-
1 hour ago, Squid said:
Have you tried disabling it and XMP if only to rule it out?
Haven't yet, but definitely can. My thinking was that if it passed Memtest it was fine, but I'll turn it off and run at stock on the next restart.
-
1 minute ago, 6of6 said:
IMHO I shouldn't have access to the diagnostics above. Squid should. I shouldn't. If I do, everyone else has?
I'm secure to the point of paranoid (until someone smarter than me kindly points out my errors).
I guess I'm kindly pointing out an error. There are no obvious "Moderators" or "Administrators" here.
LOL... I won't be able to login tomorrow. 😁
6.
Truthfully since it's the first time I'm posting on the forums I just hit Anonymize and uploaded everything for transparency thinking it was fine. Thanks for pointing that out!
-
I've been running into issues with my server in the last month or two where it'll randomly reboot, seemingly at idle most of the time. It can run fine for two weeks or as little as a day. I've done 5 passes of Memtest with no issues, but I'm stumped on what to try next.
Additionally, today I got a warning saying that Fix Common Problems found a hardware issue with my system. I've checked the logs, but I'm honestly not sure what I'm looking at.
Specs:
Unraid 6.9.0
Ryzen 3900x
ASRock X570 Taichi
2x32GB TeamGroup DDR4 3000 (running at DOCP 3000, no other tweaks)
PNY CS3030 2TB for cache, 1TB for Windows VM
RTX 2080 Super for VM
Quadro P4000 for Plex docker
Two 10TB Ironwolf, two 10TB Exos X10
Corsair RM850i
Troubleshooting:
Power Supply Idle Control at Typical
5+ passes of Memtest86
Have a drive that's got failing SMART data; working on replacing it
[Support] Linuxserver.io - Syncthing
in Docker Containers
Posted
So I think I've got Syncthing up and running how I want it, but the "watch for changes" isn't working. I've got two Unraid servers, with directories SMB'd to each other via Unassigned Devices, and period scanning is fine. It's just that when I add something to either of those shares, it's not updating until it scans again or I scan manually. Is there a setting I'm missing somewhere?