[Log at 100% even after increase, post parity upgrade and disk replacement.]

Rebooted, looks like I lost the copy progress. I did disable docker all together this time around. I guess move to 6.10.0-rc1 and retry the parity copy process?

[Log at 100% even after increase, post parity upgrade and disk replacement.]

By network thing, would that be a plugin I might be using, a router setting or a unraid config? Glad to hear it does not look like a disk issue, but it obviously presents a problem. Given the new parity drive seems to be established would it make sense to reboot the box?

[Log at 100% even after increase, post parity upgrade and disk replacement.]

I believe is just died, I logged in and the disk was marked as disabled and I was unable to run a SMART test on it either in unraid or while connect to my PC via and external enclosure. Here is one of logs from attempting to run a smart test.

 

Quote

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.28-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST4000VN000
Serial Number:    #REMOVED#
LU WWN Device Id: 5 000c50 0655e420c
Firmware Version: SC43
User Capacity:    137,438,952,960 bytes [137 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s
Local Time is:    Fri Sep  3 13:32:37 2021 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Read SCT Status failed: scsi error aborted command
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

Read SMART Data failed: scsi error aborted command

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error aborted command
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Log Directory failed: scsi error aborted command

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error aborted command
Read GP Log Directory failed

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

Read SMART Error Log failed: scsi error aborted command

SMART Extended Self-test Log (GP Log 0x07) not supported

Read SMART Self-test Log failed: scsi error aborted command

Selective Self-tests/Logging not supported

Read SCT Status failed: scsi error aborted command

Read SCT Status failed: scsi error aborted command
SCT (Get) Error Recovery Control command failed

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error aborted command
Read SATA Phy Event Counters failed

 

[Log at 100% even after increase, post parity upgrade and disk replacement.]

I upgraded my parity drive to larger drive while at the same time replacing a failed disk with my old parity drive. It looks the parity has rebuilt correctly, but the system seems to have stalled in rebuilding the failed data drive. Unraid shows the array as started, but the main dashboard and docker show it as stopped. The parity copy action is at 100% completed, but has the warning next to it saying stopped. My cpu is maxing and my log file instantly filled even after increasing it. Attached is my sys log.

Edit: Is it safe to just reboot?

unraidserver-diagnostics-20210914-1023.zip