DOM_EU
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by DOM_EU
-
-
I have now been able to solve my problem.
My static DNC cache was corrupt and had to be renewed.
Now it works again.
-
I have the same problem since today.
Community Applications requires your server to have internet access. The most common cause of this failure is a failure to resolve DNS addresses. You can try and reset your modem and router to fix this issue, or set static DNS addresses (Settings - Network Settings) of 208.67.222.222 and 208.67.220.220 and try again.
Alternatively, there is also a chance that the server handling the application feed is temporarily down. See also this post for more informationLast JSON error Recorded: Syntax error
ping works, nslookup also, but with a curl the page is no longer resolved..,
root@NAS:~# ping raw.githubusercontent.com
PING raw.githubusercontent.com (185.199.110.133) 56(84) bytes of data.
64 bytes from cdn-185-199-110-133.github.com (185.199.110.133): icmp_seq=1 ttl=59 time=21.6 ms
64 bytes from cdn-185-199-110-133.github.com (185.199.110.133): icmp_seq=2 ttl=59 time=14.9 ms
64 bytes from cdn-185-199-110-133.github.com (185.199.110.133): icmp_seq=3 ttl=59 time=12.3 ms
64 bytes from cdn-185-199-110-133.github.com (185.199.110.133): icmp_seq=4 ttl=59 time=19.9 ms
64 bytes from cdn-185-199-110-133.github.com (185.199.110.133): icmp_seq=5 ttl=59 time=18.1 ms
64 bytes from cdn-185-199-110-133.github.com (185.199.110.133): icmp_seq=6 ttl=59 time=18.0 msroot@NAS:~# nslookup raw.githubusercontent.com
Server: 10.253.254.1
Address: 10.253.254.1#53Non-authoritative answer:
Name: raw.githubusercontent.com
Address: 185.199.109.133
Name: raw.githubusercontent.com
Address: 185.199.108.133
Name: raw.githubusercontent.com
Address: 185.199.111.133
Name: raw.githubusercontent.com
Address: 185.199.110.133
Name: raw.githubusercontent.com
Address: 2606:50c0:8000::154
Name: raw.githubusercontent.com
Address: 2606:50c0:8002::154
Name: raw.githubusercontent.com
Address: 2606:50c0:8001::154
Name: raw.githubusercontent.com
Address: 2606:50c0:8003::154root@NAS:~# curl https://raw.githubusercontent.com/Squidly271/AppFeed/master/applicationFeed-lastUpdated.json
curl: (6) Could not resolve host: raw.githubusercontent.comHowever, with Firefox the page goes....
https://raw.githubusercontent.com/Squidly271/AppFeed/master/applicationFeed.json
https://s3.amazonaws.com/dnld.lime-technology.com/appfeed/master/applicationFeed.json
-
Hello together
I was wondering if it would be possible to upgrade the docker image for alturismo/xteve in Unraid to the latest version?
As I have seen there is already version 2.5 available
https://github.com/SCP002/xTeVemaybe this would be easy to implement? @alturismo
-
Hello together
I use TvHeadend as backend and Plex as frontend.
Currently I have to use xteve or antennas for Plex to find my DVBs channels.However, there is a patch in the latest unstable version of TvHeadend that allows Plex to access the channels directly via SAT>IP.
https://tvheadend.org/boards/5/topics/46764The option for "Drop "src=" parameter" has been added.
https://github.com/tvheadend/tvheadend/tree/master/src/satip
rtsp.c Always parse 'src' in RTSP requestsWould it be possible to get a version of this as a Unraid Docker image?
That would simplify a lot of things in Plex. -
Hello all.
I have problems with ASPM with the current Unraid 6.10.3.
Many of the devices can do ASPM, but it's disabled and NVMe says it can't, which I don't think is true.
Could it be because the platform is still too new and not properly supported in Unraid?
Or are there already solutions for this?
I only came across the problem when I noticed that the S3 sleep was not working and I found a PCIe error in the log.
Jun 15 11:18:54 NAS kernel: pcieport 0000:00:01.0: AER: Uncorrected (Non-Fatal) error received: 0000:00:01.0 Jun 15 11:18:54 NAS kernel: pcieport 0000:00:01.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Receiver ID) Jun 15 11:18:54 NAS kernel: pcieport 0000:00:01.0: device [8086:460d] error status/mask=00200000/00010000
If I set "pcie_aspm=off", then it works without errors, but that shouldn't be the point.
--------------------
Linux 5.15.46-Unraid.
root@NAS:~# lspci -vv | awk '/ASPM/{print $0}' RS= | grep --color -P '(^[a-z0-9:.]+|ASPM )'
00:01.0 PCI bridge: Intel Corporation 12th Gen Core Processor PCI Express x16 Controller #1 (rev 05) (prog-if 00 [Normal decode])
LnkCap: Port #2, Speed 32GT/s, Width x16, ASPM L1, Exit Latency L1 <16us
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
00:1c.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #1 (rev 11) (prog-if 00 [Normal decode])
LnkCap: Port #1, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk-
00:1c.4 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #5 (rev 11) (prog-if 00 [Normal decode])
LnkCap: Port #5, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
01:00.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
03:00.0 Non-Volatile memory controller: Device 1d79:2262 (rev 03) (prog-if 02 [NVM Express])
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM not supported
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+-------------------------------
root@NAS:~# lspci -vvvnnPPDq | grep -B 30 ':[[:space:]]ASPM'
DeviceName: Onboard - Other
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
IOMMU group: 0
Region 3: Memory at <ignored> (32-bit, non-prefetchable)0000:00:01.0 PCI bridge [0604]: Intel Corporation 12th Gen Core Processor PCI Express x16 Controller #1 [8086:460d] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 122
IOMMU group: 1
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff [disabled]
Memory behind bridge: 40500000-405fffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 32GT/s, Width x16, ASPM L1, Exit Latency L1 <16us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
--
Interrupt: pin B routed to IRQ 255
IOMMU group: 8
Region 0: Memory at 600101d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vendor Specific Information: Len=14 <?>0000:00:1c.0 PCI bridge [0604]: Intel Corporation Alder Lake-S PCH PCI Express Root Port #1 [8086:7ab8] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin ? routed to IRQ 123
IOMMU group: 9
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: 40700000-408fffff [size=2M]
Prefetchable memory behind bridge: 0000004017000000-00000040171fffff [size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk-
--
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00238 Data: 0000
Capabilities: [90] Null
Kernel driver in use: pcieport0000:00:1c.4 PCI bridge [0604]: Intel Corporation Alder Lake-S PCH PCI Express Root Port #5 [8086:7abc] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 124
IOMMU group: 10
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff [disabled]
Memory behind bridge: 40400000-404fffff [size=1M]
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
--
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00318 Data: 0000
Kernel driver in use: e1000e
Kernel modules: e1000e0000:00:01.0/01:00.0 Multimedia controller [0480]: Digital Devices GmbH Octopus DVB Adapter [dd01:0003]
Subsystem: Digital Devices GmbH Cine S2 V6.5 DVB adapter [dd01:0021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
IOMMU group: 12
Region 0: Memory at 40500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
--
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=00c <?>
Kernel driver in use: ddbridge
Kernel modules: ddbridge0000:00:1c.4/03:00.0 Non-Volatile memory controller [0108]: Device [1d79:2262] (rev 03) (prog-if 02 [NVM Express])
Subsystem: Device [1d79:2262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
NUMA node: 0
IOMMU group: 13
Region 0: Memory at 40400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 25.000W
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM not supported
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ -
Gibt es einen bestimmten Grund, warum es nicht schon die 2.14 Version im nerdpack gibt?
https://github.com/fenrus75/powertop/releases/tag/v2.14
bzw wäre es leicht umsetzbar?
BTRFS error and Read-only cache since updating to 6.12
in General Support
Posted
I have exactly the same problem, with the same error pattern.
The error exists since the upgrade from v6.11.5 to v6.12.3
I never had any problems with version 6.11.5.
I'll try it now also once with the change from Btrfs vdisk to Directory