Jump to content

chclark

Members
  • Posts

    7
  • Joined

  • Last visited

Posts posted by chclark

  1. On 3/17/2024 at 8:45 AM, yayitazale said:

    It should but you should open the communication between the 2 networks.

    Had a play yesterday with this I put the IP ranges down wrong orginally they are all on the same subnet 192.168.1.* had an issue with the streaming user and antennas so it's using the default TVheadend user account at the moment till I can work out what I did wrong. but it's working perfect otherwise, all the clients can play from the Freeview list it's created. Just need to get myself an antenna booster/splitter so I can use my other three Xbox one tuners to allow more streams. 

     

    • Upvote 1
  2. I'm looking at getting a raspberry pi back out of storage and setting TVheadend up on it one way or another with some Xbox usb tuners I got ages ago. I would go direct into the server but I can't get the aerial near. 

     

    Am I right in thinking this should work

     

    Pi with tuners - 192.168.1.*

    Unraid running Plex - 192.168.2.3

    Unraid running antenna -192.168.2.3

     

  3. 12 minutes ago, JorgeB said:

    Like mentioned disk looks healthy, SMART looks fine, you can swap slots with a different disk and rebuild, in case the same thing happens again in the future.

     ill follow procedure your linked on I think its labelled disk 3 which is disabled fingers crossed. it was odd about a week about I couldn't access the system via browser and couldn't get a screen to show me anything that was connected I had to hard reboot the server but has been fine since then this today happened.

  4. 14 minutes ago, JorgeB said:

    Because of the reboot we can't see what happened, but the disk looks healthy, suggest replacing cables to rule that out and assuming the emulated disk is still mounting and contents look correct you can rebuild on top:

     

    https://docs.unraid.net/unraid-os/manual/storage-management#rebuilding-a-drive-onto-itself

    Thank you i wouldn't know what cable to replace as its a HP microserver so its on a backplane id of expected all 4 disks would of had the fault as its a single connector to the board i think.

     

    i didn't think to check the content it says there's still used space on the disk just its marked as disable. after the reboot it allowed me to do a quick self test which passed but all the stats are zeroed but i don't know if they was unraid error stats showing in the main section or smart errors.

     

    i know i have a disk that does report a smart error so shows with a orange ! in the dash but i cant tell if it needs replacing or not.

×
×
  • Create New...