[(SOLVED) iGPU transcoding: i915 driver present but /dev/dri not available]

@randomninjaatk

 

I had that all already, thanks.  I think it's got to have something to do with either the Z390 chipset, or more likely small changes to the 9600k.  As I had mentioned, I had this perfectly set up for a friend of mine on a z370 / 8600k with zero issues, so it's not a configuration issue, unless something needs to be specifically different for the 9th gen Intel processors and/or z390 chipset somehow.

[(SOLVED) iGPU transcoding: i915 driver present but /dev/dri not available]

I just swapped my 3570k with a 9600k and an asus z390 board. Set explicitly to enable onboard video, and have a dummy HDMI plug (I even tried with a monitor attached), and I'm getting the same problem as Teixeira.  I set it up no problem on a friend's 8600k/z370, but it's definitely not working for me either.  I have the required lines in my go file, and even tried the "i915.alpha_support=1" in syslinux.cfg (though I thought I read somewhere that's no longer required).  Output of grep | lsmod i915 is as follows:

 

i915                 1245184  0
i2c_algo_bit           16384  1 i915
iosf_mbi               16384  1 i915
drm_kms_helper        126976  1 i915
drm                   319488  2 drm_kms_helper,i915
intel_gtt              20480  1 i915
i2c_core               40960  5 drm_kms_helper,i2c_algo_bit,i2c_i801,i915,drm
video                  40960  1 i915
backlight              16384  2 video,i915

 

 

Any thoughts?

 

Additionally, I just noticed on Intel's site that while both the 8600k and 9600k use the 630 graphics, the device id for is different.  

 

https://ark.intel.com/products/126685/Intel-Core-i5-8600K-Processor-9M-Cache-up-to-4-30-GHz- lists the 8600k with a device id of 0x3E92

and

https://ark.intel.com/products/134896/Intel-Core-i5-9600K-Processor-9M-Cache-up-to-4-60-GHz- lists the 9600k with 0x3E98

 

Could it be something as simple as unRAID needing to add that 0x3E98 somewhere?