Guill.St-P
-
Posts
55 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Guill.St-P
-
-
No official fix for the GUI issue with intel graphics(https://forums.unraid.net/bug-reports/stable-releases/69-after-moving-to-69-local-gui-mode-not-working-r1326/)?
Is an embedded fix planned? Or users should rely on Intel-GPU-TOP Plugin?
Otherwise, it's all good, thanks for the work!
-
Just a follow-up on my case, the test took about 4h to run and terminated fine.
From memory, it use to be faster (like 30 minutes); but maybe my Plex Library got bigger since the last time I ran the test...
I'm available to do some testing if needed!
-
10 minutes ago, Squid said:
presumably its just going through the appdata share for plex which can potentially contain hundreds of thousands of files and can take quite a while to get through (and no disk activity means that it's checking it via the cached file structure.) One user IIRC had it finally complete after 24 odd hours. I wouldn't worry about it. You'll be notified whenever it completes. It won't cause any issues while it does it's thing.
Thanks for the quick answer, I will start it tonight and let it run overnight!
-
the extended test is stuck checking /mnt/user/appdata for 1+ hour without any disk activity... anyone have a clue why?
I only have my docket folder in this share (plex and rtorrentvpn only)
Thanks!
-
15 hours ago, binhex said:
you are missing the two cert files, as shown in your log:-
Options error: --ca fails with 'ca.rsa.2048.crt': No such file or directory (errno=2) Options error: --crl-verify fails with 'crl.rsa.2048.pem': No such file or directory (errno=2)they are included in the zip you download from PIA, so you need the two certs and a single ovpn file in the /config/openvpn/ folder
Solved the issue; that was a simple one! and thanks for the quick answer binhex
-
Hi all,
I'm having issues getting to the webui (the docker is starting fine)
I attached my log file to this message
I'm a novice user so don't be afraid to ask basic questions, I will not be offensed
Should I use my usual user and password from PIA or the one listed as "PPTP/L2TP/SOCKS Username and Password"?
Info on my network:
Routeur: 192.168.2.1
Submask: 255.255.255.0
unraid: 192.168.2.166
mac firewall turned off
should I play with proxy? not sure how...
I get this message on chrome when I want to launch the webui : ERR_CONNECTION_REFUSED
thank a lot to everybody!
-
12 hours ago, binhex said:
Odd, your website login (not pia forum account) is normally ok to use, the format for your website login is pxxxxxxxx right?
In any case, the web ui wont launch until you have a running vpn tunnel, so you def do have a connection to PIA so i wouldnt concern yourself too much with it.
Yes I'm using the website login starting by p...........
Is there a way to confirm I'm connected via the VPN?
Thank you
-
Hi all,
I've been using this docker since a couple of days; great work binhex!
I just want to confirm something with you guys:
Using my app/website login info for PIA doesn't work in delugevpn (the webui won't load)
However, using the "PPTP/L2TP/SOCKS Username and Password" works.
What is the difference between those 2 login info?
Does I'm doing the right thing?
Thanks all!
-
Sorry if my previous post wasn't clear
I did it just before my previous post (and set it back to my previous settings just before posting my screenshot).
It make no difference ....
I just the manual update to unRAID 6.2 and the Plex update was then available and applied successfully
Thanks everybody for the help!
-
Sorry if my previous post wasn't clear
I did it just before my previous post (and set it back to my previous settings just before posting my screenshot).
It make no difference ....
-
You could try to change your dns server to 8.8.8.8 and 8.8.4.4
I tried it without any success.
Here is my default network config:
My router is setup to always assign the same ip address to my unRAID server
Thanks again for the help!
-
Ok, thanks for the help Bjonness406.
I don't know if it's related but I don't see the 6.2 update either.
In the plugin page, clicking "Check updates" doesn't find any updates.
I just moved to a new house and changed my ISP at the same time; I don't know if that can make a difference...
Or is it some kind of network setting that I did wrong?
-
Clicking "Check for updates" on the Docker page don't find any updates.
The check for updates button does not work in 6.1.x, you need to click advanced view and then force update.
The check for updates button works on 6.2.
Thanks but it doesn't seems to do anything.
Here is what I obtain
Did I missed something?
-
Thanks for the quick answer interwebtech.
My settings looks fine.
See screenshot below.
Let me know if you need any info from my side!
-
Hi all,
I'm running Linuxserver Plex Media server on my unRAID server.
I'm not running version 1.0.0.2261 and I have some problem with my iOS app which have some difficulties to connect to the server.
I can see that the latest version is suppose to be 1.1.4.2757 (from the Plex download page).
Clicking "Check for updates" on the Docker page don't find any updates. Restarting the Plex Docker don't do much better.
Any other suggestions?
Thanks a lot for the help!
-
Nobody?
-
I also have the same problem than X1pheR (system fans shows OK, but no temperature reading)
The command "sensors" is working well in the terminal and I gel this:
Linux 4.1.7-unRAID. root@Alligator:~# sensors acpitz-virtual-0 Adapter: Virtual device temp1: +27.8°C (crit = +105.0°C) temp2: +29.8°C (crit = +105.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +35.0°C (high = +80.0°C, crit = +100.0°C) Core 0: +35.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +33.0°C (high = +80.0°C, crit = +100.0°C) it8728-isa-0a30 Adapter: ISA adapter in0: +1.13 V (min = +0.00 V, max = +3.06 V) in1: +2.04 V (min = +0.00 V, max = +3.06 V) in2: +2.03 V (min = +0.00 V, max = +3.06 V) in3: +2.03 V (min = +0.00 V, max = +3.06 V) in4: +0.01 V (min = +0.00 V, max = +3.06 V) in5: +1.74 V (min = +0.00 V, max = +3.06 V) in6: +1.50 V (min = +0.00 V, max = +3.06 V) 3VSB: +3.38 V (min = +0.00 V, max = +6.12 V) Vbat: +3.07 V fan1: 1004 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: -128.0°C (low = +127.0°C, high = +127.0°C) sensor = disabled temp3: +30.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI intrusion0: ALARM
Here are my settings
Config folder:
go file:
sensors.conf file
Can anyone check and confirm if there is anything wrong?
thanks a lot!
-
OK, I chosen port 3690 (unused by any other Docker) and the Docker is starting succesfully
When I choose to go to the WebUI, it just bring me to the server ip adress; so, to the unRAID dashboard.
what do I'm missing there...?
For example, with Plex plugin, when I click to go on the WebUI, it brings me to my local Plex page on my Internet browser... should it be the same for PhotoShow? Or is there something esle to install?
Thanks
-
Ok, how do I chose? Can it be the same port number used by another docker?
-
Plugin is not working for me:
Here is what I have whent I want to start it:
IMAGE ID [latest]: Pulling from sparklyballs/photoshow.
IMAGE ID [511136ea3c5a]: Already exists.
IMAGE ID [53f858aaaf03]: Already exists.
IMAGE ID [837339b91538]: Already exists.
IMAGE ID [615c102e2290]: Already exists.
IMAGE ID [b39b81afc8ca]: Already exists.
IMAGE ID [8254ff58b098]: Already exists.
IMAGE ID [ec5f59360a64]: Already exists.
IMAGE ID [2ce4ac388730]: Already exists.
IMAGE ID [2eccda511755]: Already exists.
IMAGE ID [5a14c1498ff4]: Already exists.
IMAGE ID [060be227b705]: Already exists.
IMAGE ID [fc9a0fa7e39a]: Already exists.
IMAGE ID [95aedf1cf8d5]: Already exists.
IMAGE ID [3dcc289d7145]: Already exists.
IMAGE ID [ccd9f08639eb]: Already exists.
IMAGE ID [2caede33a2a7]: Already exists.
IMAGE ID [a19912056c16]: Already exists. Digest: sha256:948642b030abd1cfc3eb2233ce5dae8f0e0383ae67a02e213d5efe8d0a785832. Status: Image is up to date for sparklyballs/photoshow:latest.
TOTAL DATA PULLED: 0 B
Command:
root@localhost:# /usr/bin/docker rm -f Photoshow
Photoshow
The command finished successfully!
Command:
root@localhost:# /usr/bin/docker run -d --name="Photoshow" --net="bridge" -e TZ="America/New_York" -p 80:80/tcp -v "/mnt/user/Photos/":"/Pictures":rw -v "/mnt/user/appdata/":"/Thumbs":rw sparklyballs/photoshow
66fc28ecbccda2af107d9fed7716e4eab16a813a3c0938377bc8110720062697
time="2015-09-01T21:28:00-04:00" level=fatal msg="Error response from daemon: Cannot start container 66fc28ecbccda2af107d9fed7716e4eab16a813a3c0938377bc8110720062697: Error starting userland proxy: listen tcp 0.0.0.0:80: bind: address already in use"
The command failed.
Should I change the host port? It's on the default setting: 80... I'm not sure what is the problem...
[SOLVED] my LOG is full. How to clear it??
in General Support
Posted · Edited by Guill.St-P
same problem for me; server is up for just 2 months
any clue?
edit: log file attached
edit2: rebooted and log is back to 1% (for now)
root@Alligator:~# du -sm /var/log/* 1 /var/log/Xorg.0.log 1 /var/log/Xorg.0.log.old 1 /var/log/apcupsd.events 1 /var/log/apcupsd.events.1 1 /var/log/apcupsd.events.2 1 /var/log/apcupsd.events.3 1 /var/log/apcupsd.events.4 0 /var/log/btmp 0 /var/log/cron 0 /var/log/debug 1 /var/log/diskinfo.log 1 /var/log/dmesg 1 /var/log/docker.log 0 /var/log/faillog 1 /var/log/fluxbox.log 1 /var/log/gitflash 1 /var/log/lastlog 0 /var/log/libvirt 1 /var/log/maillog 0 /var/log/messages 0 /var/log/nfsd 123 /var/log/nginx 0 /var/log/packages 1 /var/log/pkgtools 0 /var/log/plugins 0 /var/log/preclear.disk.log 0 /var/log/pwfail 0 /var/log/removed_packages 0 /var/log/removed_scripts 0 /var/log/removed_uninstall_scripts 1 /var/log/samba 0 /var/log/scripts 0 /var/log/secure 0 /var/log/setup 0 /var/log/spooler 0 /var/log/swtpm 1 /var/log/syslog 2 /var/log/syslog.1 4 /var/log/syslog.2 0 /var/log/vfio-pci 1 /var/log/wtmp root@Alligator:~# du -sm /var/log/sa/* du: cannot access '/var/log/sa/*': No such file or directoryalligator-diagnostics-20210605-0952.zip