Bigmonty
-
Posts
77 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Bigmonty
-
-
1 minute ago, caplam said:
did you check you don't have duplicate ip on your network ?
No but ive just checked and I don't
-
I've been using Unraid for years with no problems but yesterday things started going wrong with the internet/network in my house and I have tracked the problem down to my Unraid server (6.8.3).
When the server is off everything is fine but when I turn it on the internet grinds to a halt on every other device in my house to the point where it's unuseable.
The server itself generally seems ok (no high CPU or RAM useage) and I haven't made any major changes to it recently. I generally use it for the usual dockers such as Plex/Sonarr/NZBGet etc.. and an Ubuntu VM so I tried turning then all off and leaving the server for a bit. The same thing happened however. I am at the point now where I have no idea how to track whats causing it.
Any idea? Are there any logs I could post which might help track the issue?
Thanks
-
Well its the Speedtest.net plugin im using primarily to test this so I'm guessing its using the flash drive (where the plugin is installed) as the location of the download, which on first thought might be the cause of the problem. However when I try and use NZBGet docker to download something it achieves the same low speeds and its installed on and downloads to the cache drive.
As for how it's networked I said the following in my initial post
QuoteMy setup is an unraid server and my desktop PC both connected by gigabit ethernet to a switch which is gigabit ethernet to my router/modem.
If i transfer files from or to my PC from the Unraid server cache drive I gets speeds of 112 MB/s so that looks perfectly fine to me.
-
Got a bit of a strange issue and I'm not sure if its a problem with my Unraid server or not.
My setup is an unraid server and my desktop PC both connected by gigabit ethernet to a switch which is gigabit ethernet to my router/modem.
I recently got 350mbps fibre broadband so thought I would run a couple of speed tests on my desktop and unraid server to make sure I was getting the quoted speeds.
On Speedtest.net and Fast.com I get the following download speeds (upload is fine and maxed on both):
Desktop: approx 380mbps
Unraid Server: approx 180mbps
Needless to say I was quite shocked at the difference. I tried changing ports on the switch and even removing the switch altogether.
Anyone got any ideas?
Cheers
-
Hi,
The Fix Common Problems plugin is reporting that I have Machine Check Events detected on my server.
I have followed what the suggested fix was and have attached my diagnostics file accordingly.
Just a note that my server crashed right before I noticed this error upon rebooting.
Any help appreciated.
-
click on the link in my sig for vpn docker faq, then scroll down to deluge specific faq's, there are instructions listed there on how to verify the tunnel is working.
Thanks worked fine.
-
Quick question - is there any (easy and not too technical) way to confirm that DelugeVPN is definitely connected to the internet through my PIA account?
I'm just being overly cautious here.
-
Still can't get Siphon to add a Torrent to Deluge. I'm still getting the "cannot communicate with the Deluge server" message, followed by the "Torrent not added message".
I had the same problem yesterday and for some reason after a few hours it started working. All i did was change the settings in Siphon to left click only and then restarted my PC and unraid.
I still get messages from Siphon saying that the Torrent has already been added but it does seem to add them now.
-
Anyone? ?
Exact same thing happening here. No idea what's wrong with it.
-
Managed to figure it out. I hadn't changed the bridge to br0 in Settings/VM Manager.
Once I did this and reinstalled the VM it worked fine.
Delete the topic if you want mods.
-
Any help appreciated as this is driving me nuts.
I have installed LibreELEC VM and it's up and running fine. I want it to be able to access my shared Kodi database on my Mariadb docker.
To do this I want to add an "advancedsettings.xml" file to LibreELEC, however I cannot figure out how to get access to the file system.
LibeELEC appear as a computer on my Network but I get the "windows cannot access" error message. I have also tried to SSH into it using the IP address shown in LibreELEC, this however just times out.
The IP address in LibreELEC is 192.168.122.46 however generally everything on my Unraid server is under 192.168.0.5, I don't know if this has anything to do with it.
Any ideas please?
-
Rebooted my server and Docker is not starting again. I have 60gb free on my cache drive so no idea whats going on.
I have attached another log.
Any help appreciated.
-
Managed to get it working. My 250gb cache drive had 16gb free, I freed up some more space and everything started working again.
I can't believe I use so much space on the drive just to run Plex, Sonaar, Couchpotato and NZBGet. Also the Docker image has 50gb allocated to it now.
Is there anyway to free up some of this space?
-
Hi,
I wonder if somebody could offer some advice.
I just tried to update my Plex container but received some errors and then the container disappeared.
I rebooted my server but now the whole Docker tab has gone. Also if I now go into the Apps tab I get a bunch of errors.
I tried increasing the size of Docker in system settings but it didn't seem to work.
Any help appreciated.
I have attached my log.
-
Ok thanks for the advice. Will give that a shot.
-
Hi.
I upgraded to 6.1.7 and restarted my server only to get the dreaded red cross next to one of my drives. Everything was fine before the upgrade.
I looked at the diagnostics file to check the smart report and it says my drive is fine. Not sure what to do now.
The drive in question is 3TB - sdk - ST3000DM001-9YN166
Any help would be appreciated.
I have attached the diagnostics file.
-
are you trying to load a docker from a repo or from local storage ?
Not sure what was going on, all the templates I had were empty. However after a few attempts the templates seemed to populate themselves.
To be honest I've no idea what happened, so I'd just ignore my post as it seems to be working fine now.
-
I wonder if someone could help.
After upgrading to 14b I followed the instructions on this page to recreate my docker img.
However when trying to add my previously installed applications under user defined templates I get "the command failed error".
Edit - never mind, seems to be working now. My saved templated had no data in them at all for some reason. After trying a few times the data just appeared, no idea what was happening.
Internet grinds shortly after server start
in General Support
Posted
Hi. I have been running Unraid for many years when very few problems. Recently I have noticed that within 15 mins or so of me starting my Unraid server my household internet grinds to a halt. After stopping the server the internet starts working again properly.
I am not sure what is causing this problem as I have not made any changes to the sever. I run a few dockers such as Plex, nzbget, sonarr etc... but not much else.
Is there anything I can look at to help. I can post a diagnostic summary if this would help.
Many thanks.