[Unraid OS version 6.12.4 available]

Issues with custom IPVLANL3 Docker network after the upgrade.

All my dockers run on a custom IPVLANL3 network after the up grade none of the dockers will

start and produce this error in the log “failed to create the ipvlan port: device or resource busy”

 

The custom network is present and all dockers are assigned to it.

If I roll back everything works correctly as it always has

 

root@NAS1:~# docker network ls
NETWORK ID     NAME        DRIVER    SCOPE
c672eff05a16   bridge      bridge    local
3bbd8bb2ae5c   host        host      local
de7e521a4485   ipvlan-l3   ipvlan    local
f6fe78a2336c   none        null      local

nas1-diagnostics-20230901-2323.zip

[(SOLVED) 2 Failed Drives]

I Just replaced them both with 2 brand new cable. Got 9 back, added 5 back to the Array and it is rebuilding.

 

Will see how it looks when all is done.

 

Thanks for the help

[(SOLVED) 2 Failed Drives]

I checked the connections and swapped the cables.

 

Disk 5 was failed Red X, and now is the Unassigned Device sdi

 

Think that happened after a few reboots

[(SOLVED) 2 Failed Drives]

Version: 6.7.2

After an Extended power outage I lost one drive Failed, and another with a Unmountable: No file system errorr.

 

I tried xfs_repair, on the drive with the bad file system, got the following

 

root@NAS1:~# xfs_repair -v /dev/md9
Phase 1 - find and verify superblock...
superblock read failed, offset 0, size 524288, ag 0, rval -1

fatal error -- Input/output error

 

The Array starts and I can get to the remaining disk shares

 

I am fine with losing the data on these 2 drives, Just need help getting the array back with the remaining drives.
 

nas1-diagnostics-20190808-1522.zip