kasper1705
-
Posts
12 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by kasper1705
-
-
2 hours ago, kasper1705 said:
Hi guys
I have actually made a post a long time ago, about the problem not getting access to the webgui after iptables was not part of unraid as default.
I tried many different things but never got it working. So I was using openvpn as a plugin in unraid and vpn disabled in the delugevpn docker.
But now I want to try to figure this out, and making it work with the vpn functionality inside the docker and not by using the openvpn plugin (gives me some headaches with other applications I use)
What I have tried for now
1. Uninstalled and reinstalled delugevpn from scratch (made sure I got the newest version, removed everything in the appdata folder etc.)
2. Activated virtualization on MOBO and turned on VM's in Unraid GUI, to activate iptable_magle_module (for some reason it did not work with the commands stated by binhex in the FAQ)
3. Portforwarded all the ports for delugevpn in the router (just to be sure)
4. Restarted router and unraid server
And for some reason, even though iptable_magle_module seems to be activated according to the log, I still can't get access to the deluge gui with vpn enabled.
It works when i disable vpn in the delugevpn docker.
As I am using PIA as VPN, I have also double checked the credentials and they are correct
So if anyone of you bright minds could tell me what to do, it could be much appreciated.
I have attached the supervisor log for delugevpn, if that is of any help
That did it binhex. Just strage because i actually tried to change those values before, where it did not work. Probably a bad version of the docker
But thanks again :-)
-
Hi guys
I have actually made a post a long time ago, about the problem not getting access to the webgui after iptables was not part of unraid as default.
I tried many different things but never got it working. So I was using openvpn as a plugin in unraid and vpn disabled in the delugevpn docker.
But now I want to try to figure this out, and making it work with the vpn functionality inside the docker and not by using the openvpn plugin (gives me some headaches with other applications I use)
What I have tried for now
1. Uninstalled and reinstalled delugevpn from scratch (made sure I got the newest version, removed everything in the appdata folder etc.)
2. Activated virtualization on MOBO and turned on VM's in Unraid GUI, to activate iptable_magle_module (for some reason it did not work with the commands stated by binhex in the FAQ)
3. Portforwarded all the ports for delugevpn in the router (just to be sure)
4. Restarted router and unraid server
And for some reason, even though iptable_magle_module seems to be activated according to the log, I still can't get access to the deluge gui with vpn enabled.
It works when i disable vpn in the delugevpn docker.
As I am using PIA as VPN, I have also double checked the credentials and they are correct
So if anyone of you bright minds could tell me what to do, it could be much appreciated.
I have attached the supervisor log for delugevpn, if that is of any help
-
Fixed the problem to get access to Deluge with vpn activated. Well sort of.
I downgraded to unraid 6.1.9, reinstalled delugevpn (with exactly the same settings as with unraid 6.2), startet the webgui with vpn activated and everything works again.
So I think I'm waiting till there is a further update of either delugevpn or unraid 6.2, before i'm going all in again.
-
Here it is
And here is the problem:
[warn] iptable_mangle module not supported, you will not be able to connect to Deluge webui or Privoxy outside of your LAN
To correct, go to the VM's tab, enable VM's and hit apply. Then disable VM's and hit apply. Then restart delugevpn.
I don't have VM's activated as my hardware doesn't support Virtual Machines. So I don't have any VM's tab to enable and disable VM's.
It is strange that this failure should have any relation to an activated VM
-
Hi binhex
I'm not specifying strong_certs to yes.
So it is kinda strange it will not work with the vpn on
-
Here it is
-
It works when the vpn is off.
Since i'm using pia, would a solution maybe be to download the openvpn files available at pia's homepage and just overwrite those in the appdata folder of delugevpn?
-
For some reason I still can't get access to the webgui of DelugeVPN.
I have checked the vpn_port is set to 1198, that my username and password for the vpn is correct and configured LAN_NETWORK accordingly to 192.168.0.1/24, as my router is sending out ip-adresses from 192.168.0.1
But I still get no connection to the webgui.
I have also tried to remove the docker and reinstall the docker image from scratch and install DelugeVPN. But still doesn't work. I'm running Unraid 6.2 and should have the newest version of DelugeVPN according to the Docker section
What is the problem here?
A syslog is attached, if that is of any help
Thanks in advance
-
That did it. I must have changed it in the volume mapping for /root by mistake. Thanks for the quick help
-
Hi everyone
I've heard there was some problems with unBALANCE in a previous version of unRaid, where it only will come with a message saying "The array is not operational. Please start the array first."
I also read there should come an update to fix this. But i am still encountering it. I have the lastest version of unraid installed (ver. 6.1.3), tried to restart both the server and the docker service. Tried to reinstall unBALANCE, but nothing works. Are there any compatibility problem with unBalance under Unraid ver. 6.1.3 or am I doing something wrong?.
I have also attached the log for unBalance, if that helps
-
Well i'm having the same problem. Tried to remove the docker image and reboot my unraid server and reinstall docker, but nothing happens. In the plugin section i only have the Dynamix WebGui and the Unraid OS listed, so there should be no plugins, that mess the docker container section up.
Is it possible there is a problem with the Dynamix WebGui after the update to Unraid 6.0.0?
LSI Controller FW updates IR/IT modes
in Storage Devices and Controllers
Posted
Hey guys
just got a LSI 9211-8i HBA card and wanted to flash it to IT Mode. But my stupid Gigabyte motherboard has BIOs limitations and comes with the infamous failure “"Failed to initialize PAL".
I have tried with many different EFI shell, but nothing work. So it looks like i have to invest in a motherboard, where i am able to flash the HBA card to IT-mode
The motherboard need to support LGA1150, and been looking at Supermicro motherboards, but i like to know if you have other good suggestion.
The main use has been as a NAS/plex server and download/backup station. But i like to be able to fiddle with VMs in the future. Nothing heavy though.
I hope some of you can pinpoint me in the right direction