01111000
-
Posts
201 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by 01111000
-
-
I must be overlooking something simple but I’d like to access my server while on the go via IP Address when I’m using the VPN. While Tailscale does connect, I cannot access any of the local services running on my server via IP. Where do I configure local access?
-
Just now, trurl said:
Or maybe just reseat that controller.
Great, thanks again. The cables are very old at this point so hopefully it works either way.
-
Gotcha. Time to buy new cables for that backplane.
-
Parity, SDZ and SDY are the problem disks right now. There are no smart warnings that I can see, only indication of something being wrong is the parity disk being disabled. Scrutiny doesn’t indicate anything either but I don’t know how it polls its data. This is a server running at my parents house, I no longer live with them and am usually not around due to my job. That’s also why it hasn’t been updated, I haven’t been around and have not had time to really sit down and work through any potential issues after the upgrade. This build has been particularly bulletproof throughout the years.
Here’s the weird part of this, maybe related? The server is physically located on top of a cabinet, 6 feet or so above the ground. On the same day of this issue, the basement bathroom flooded this area. I’m thinking it’s possible that they bumped that cabinet a few times while dealing with this aftermath. I can’t tell for sure though. That’s why I’m asking for help, I was thinking about trying to reseat the cables but what would be the best way to determine this potentially fixed an issue? Or am I crazy for thinking this could be a cause?
Thanks again for your help
-
7 minutes ago, trurl said:
Attach Diagnostics to your NEXT post in this thread.
Well, duh. Sorry about that
-
Hey, it's been some time. Recently, I have a 3 drives, including a parity drive, report errors. How should I proceed at this point?
-
2 minutes ago, bonienl said:
The "appdata storage location" needs a trailing slash (/).
Unraid 6.8 has stricter checks on names of files and folders.
Well, that was an id10t error. Thank you
-
15 minutes ago, Squid said:
Post your diagnostics
ugh, should've realized that.
Attached
-
Recently upgraded to 6.8. I disabled Docker but am unable to re-enable it. The directory shows red and cache is not available in the dropdown. My cache drive is still accessible. Any ideas?
-
On 12/6/2019 at 7:34 AM, R0Bzombie said:
You'll probably want to get a nvidia quadro p4000 gpu for harware transcoding.
If I was you, i'd keep current config and add a p4000 and see how it's going.
He can actually use a P2000 for what he needs to do.
-
29 minutes ago, Squid said:
At some point you either redid the flash drive from scratch, or wound up deleting manually the files in /config/plugins/dockerMan/templates-user
Your end-game here is to take a screen shot of all of the container's mappings, then delete the docker.img, then reinstall those apps again via CA adjusting your templates accordingly.
Unless your flash did drop offline, in which case a reboot will bring everything back, but then you've got to solve the problem of your flash disappearing.
Before I do any OS upgrades or major changes, I make a backup of my Flash drive (I know I did for the 6.4 and 6.4.1 upgrades). If my backup does have these template files, can I simply drag it back over, restart docker and be good to go?
I really appreciate the help guys.
-
On 3/12/2018 at 8:11 AM, trurl said:
I see you have been a forum member as long as I have, so maybe you installed your dockers a long time ago before the dockerman component was fully developed.
When and how did you first install these dockers?
These Dockers were setup a while back (over a year), using Community Apps. When I went to 6.4, I did end up reinstalling some of my plugins, this is likely the cause. What would be the easiest way to fix the issue- recreating each docker container? Just threading as lightly as possible as I don't want to have to reconfigure everything from scratch.
On 3/12/2018 at 1:11 PM, CHBMB said:Hadn't even thought of that! Genius.....
lol, I didn't know what to put as my username so I went with x since it's a variable and can be anything.
-
I know this is probably a simple fix, but all of my Dockers that I've had installed on 6.3 give me this error when trying to upgrade it on 6.4. Fix Common Problems is unable to fix the issue (Template URLs are missing). What is the easiest way to fix this issue; I'm not sure where to add the missing information.
-
AKR- with the new 6.4 release, Unraid’s GUI is utilizing 443. You will need to change that to 442 or something similar and forward the ports as needed.
-
I had the same issue. I tried rebooting but it did not work, so I ended up rebooting via IPMI. The next restart it was stuck on Mounting Drives. Still stuck trying to shut down.
-
2 hours ago, dlandon said:
You are installing packages from /boot/packages/ - tcl, expect, openvpn. I'd recommend finding another way to do this. Use the nerd pack for packages, and a docker for openvpn. These packages may be holding up a shutdown.
I believe that a few plugins auto installed these packages. I'm using peter sm's OpenVPN plugin, for example.
Ive fixed the deluge error as well. I'll give it a try and report back.
edit- nope. Same issue. Unmounted unassigned drives, stopped OpenVPN, stopped all dockers and VMs and use Open Files plugin to kill any remaining processes.
-
1 hour ago, dlandon said:
Post diagnostics.
server-diagnostics-20171009-2011.zip
See attached.
Thanks
-
I've had this issue as long as I remember, literally years. I'm on 6.3.5
I am trying to either Stop my array or reboot/shut down. It ALWAYS gets stuck with "Unmounting disks...Retry unmounting disk share(s)..." and I am forced to use IPMI to force a reboot.
I want to fix this once and for all. I'm trying to add a new disk but cannot because of this. I stop ALL of my dockers and VMs before hitting stop in the webui.
How can I troubleshoot this and resolve it? I'm so sick and tired of this issue rearing its head every few years. I really appreciate any help with this; I'll provide whatever is needed- I'm extremely frustrated right now.
- 1
-
Is there at least a slightly more detailed guide on migrating from the LT plex docker to the LS Unraid docker?
Thanks for the dockers guys, appreciate all that your team does for the community.
-
Is anyone willing to take on the Guacamole Docker? I'm surprised that there doesn't seem much demand for it on these forums; I see this being extremely useful especially when paired with a reverse proxy. I currently use a VPN to connect to my home network while away and RDP into what I need.
-
Thanks Peter. At least now i know i am not crazy. Is this going to be fixed in the newer release you previously spoke about...or is it an UnRaid issue..?
I think it needs a new package that isn’t in 6.1
Peter, how can I ensure that the plugin doesn’t auto update and kill itself? Thanks
-
Has this been fixed or do I need to use the old plugin on 6.1? How can I disable the auto updates that break it? Thanks
Version 6.1 should be fine for latest plugin
Do we need to rebuild anything? I have the same issue even with the latest update. Rolling back to the version that was linked two pages or do ago allows me to connect right away.
I appreciate the help
-
Has this been fixed or do I need to use the old plugin on 6.1? How can I disable the auto updates that break it? Thanks
-
Just wanted to say thanks. Was able to use this plugin to easily mount drives from my old unraid server to transfer the data to the new server. Will also put it to use for a deluge docker as my ssd is relatively small compared to my old, now unused, cache drive.
[Plugin] Tailscale
in Plugin Support
Posted
LAN IP