[Radarr deleted ALL my movies]

I searched this forum, where I am already a member

[Radarr deleted ALL my movies]

I guess so, I couldn't find anything for Radarr, so thought this was a good place to post. Ive 'solved' my issue. Please remove if you need to

[[Support] Linuxserver.io - Radarr]

I recently had Radarr delete all my movies. I created a post in general support.

 

 

To summarise, I thought I would try monitor a 'collection' and it seemed that Radarr decided to delete everything that wasnt in this list. 

I've never used lists before, and have been running radar for years. Turns out, there is this setting that I'm sure I didnt enable. 

Is it remotely possible this gets enabled by default if monitoring a collection through the normal search page

[Radarr deleted ALL my movies]

You're probably right. But to counter, It could be considered a bit more general Radarr issue, than specific to my chosen repo

[Radarr deleted ALL my movies]

I have restored my database now, and I guess I have found the setting that was the issue. 

 

Like I said, i didn't add a list from this screen. and have never used lists before, so I didnt change it to remove and delete files. This cant be the default setting right?  

[Radarr deleted ALL my movies]

I recently upgraded to v3 (automatically?) and decided to try to add some movies via "collection", I chose something I didn't have or really care about, "Star Wars Lego Collection"

 

After adding, it seems like Radarr thought that was ALL I wanted in my collection and proceeded to delete thousands of movies from its database, and removed 9+TB of files across 2x6tb drives. 

 

I have attached a few most recent logs (i hope there is nothing incriminating), but this excerpt seems to be where I added the list, and Radarr starts deleting my files.

2020-12-29 07:27:01.4|Info|FetchAndParseImportListService|Syncing Movies for List: TMDb Collection
2020-12-29 07:27:01.4|Info|TMDbCollectionImport|Importing TMDb movies from collection: 302331
2020-12-29 07:27:05.7|Info|ImportListSyncService|[Life on the Line (2015)][tt3727202, 398289] was in your library, but not found in your lists --> Removing from library and deleting files
2020-12-29 07:27:05.8|Info|MovieService|Deleted movie [Life on the Line (2015)][tt3727202, 398289]
2020-12-29 07:27:05.8|Info|ImportListSyncService|[American Casino (2009)][tt1396209, 57904] was in your library, but not found in your lists --> Removing from library and deleting files
2020-12-29 07:27:06.0|Info|MovieService|Deleted movie [American Casino (2009)][tt1396209, 57904]

 

I have pulled the drives and tried to view/recover on my windows machine to no avail. I am now loading an appdata backup and hoping my database can be recovered, and ill just slog through re-downloading everything. 

radarr.0.txt radarr.1.txt radarr.2.txt

[Syslog filling up! - NGINX out of shared memory]

Another one getting these errors. 

Ive tried rolling back to 6.8.2 and still getting them.

Now noticed on other threads some mods asking if it happens in safe mode so I'm trying that now. 

Started happening most recently after 9-10 days, so ill keep an eye on it and will make a new thread with safemode logs if it happens again

[[Plugin] Mover Tuning]

Yeah sometimes my cache fills up if I 'backfill' or have a few large (incomplete) torrents, like games or something. Or radarr/sonarr decide to not delete the moved file for some reason (I know, another issue I should fix)

 

Regular day to day my 500gb is fine, I don't mind if stuff gets moved to the array, I just try and keep the disks spun down when possible. I think a 1-2tb is a bit overkill for most of my use. Id rather spend that money on another large drive for the array, and bump one of my older smaller drives to an unassigned device for my incomplete downloads

[[Plugin] Mover Tuning]

Thanks, good to know. 

I dont mind having old files on cache, I almost exclusively use this for movies and TV, so I kindof want to keep "new" stuff on cache for quicker access.

I have ~500gb cache, mover checks hourly, and threshold currently set at 70%. So I might try setting the days to 20.

To confirm, mover will check every hour if my cache is at 70%, when it is, it will only move things older than 20days. 

 

Lastly, is there an override or something, say I download a bunch in a short period of time nothing will get moved because its so new right.??

 

[[Plugin] Mover Tuning]

Can someone explain how the age feature works in combination with the threshold %. 

 

- Will it move, say, over 30 day old files BEFORE my threshold % is met?

- Will it not move 10 day old files, even if my threshold % IS met?

 

I haven't tried it yet, but maybe it needs an "and/or" option for each condition?

[[Support] SpaceinvaderOne - Macinabox]

How does this VM handle updates?

I assume its OK to update from systempreferences, Do people enable automatic updates?

[[Support] SpaceinvaderOne - Macinabox]

So Ive made a few posts over the last few pages regarding my inability to passthrough onboard or gpu audio. I was getting garbled and staticy audio with multiple usb audio devices (soundcard, speaker and headset). I then ordered a PCI soundcard and usb card as I read that there can be issues passing through individual usb sound devices. Well I couldn't get either of them passed through correctly either despite being detected by BIOS and unraid fine.

Then I had an idea, Use the PCI usb card for the unraid flashdrive and UPS usb input, and passthrough all the onboard usb controllers to my VM (vfio-pci.ids=xxxx:xxxx,xxxx:xxxx). This seemed to have worked perfectly (havent tested speeds or anything) and I now have all my front usb ports hotswappable for my MacinaBox VM and my usb soundcard is working as well as I could hope. 

👍💪

[Unraid Feature Request Wishlist]

I don't really know what most of those options are in the poll.

Probably the wrong place to ask, but I would really love a solid built in way to see what service/docker is spinning up my disks n whatnot (I use open files / file activity plugins, but my disks are always spinning)

[[Support] SpaceinvaderOne - Macinabox]

On 11/18/2019 at 7:00 AM, samtrois said:

Ive ordered a soundcard and usb card to passthrough for this VM, sadly I'm on a h97 M-ATX board, and my 2 pci-e are used up with my GPU and HBA, so have ordered some cheap PCI cards. Will report back

Sadly no luck so far with my PCI soundcard. The chipset is a C-Media CMI8738 and is detected by unRaid.
 

 

 

I have tried all PCIe ACS override options .

Disabled:

 

Downstream:

 

Multi-function:

 

Both:

 

 

 

And it just doesn't show up as an option in my VM config.

Could someone suggest the best ACS override setting and code to enter it in the XML manually?

[[Support] SpaceinvaderOne - Macinabox]

1 hour ago, Skitals said:

picked up a FL1100 usb card. Passed it through to MacOS and my usb audio works fine now. This is the card I went with

Ive ordered a soundcard and usb card to passthrough for this VM, sadly I'm on a h97 M-ATX board, and my 2 pci-e are used up with my GPU and HBA, so have ordered some cheap PCI cards. Will report back

[[Support] binhex - DelugeVPN]

Lastest build seems to break AutoRemovePlus plugin, I'v had to rollback to 

binhex/arch-delugevpn:2.0.3-1-08

 

[[Support] SpaceinvaderOne - Macinabox]

7 hours ago, Skitals said:

I can plug in my usb astro mixamp or usb-c pixel buds, and they are recognized as audio devices. But the audio through either is garbled/clicky.

The only issue I'm having at the moment is audio. I cant seem to pass through my onboard or gpu audio. and Ive tried 3 usb audio devices, all show up fine, but all are choppy and static-y. 

Ironically, bluetooth audio works fine with a cheap BT dongle passed through, but not ideal for most of my situations

[[Support] SpaceinvaderOne - Macinabox]

36 minutes ago, phyzical said:

Hey all,

 

on my first install i was able to get GPU passthrough via my GT 620 as a secondary card. but the next day i could not get video signal anymore. So i tried reinstalling the OS a few times infact.. (also tried high sierra and mojave) this had no effect.

 

I also think i was served with weird boot screen at one point which allowed me to skip the clover boot loader (i think this is the important part as the GT 620 suffers from the reboot bug)

 

Does anyone know how to adjust the Clover image to allow for me to try and skip the boot loader to rule this out as an issue or any tips for GPU passthrough and these macos images.

 

i know the 620 shouldn't work with catalina but i swear it was working, persisted vm sleep too. i dont know how i got lucky the first time haha..

 

thanks!

I had a "similar" issue, I bought a gt710 just for the purpose of passing though to this vm. Got it up once, then changed something and couldn't get it displaying again after several reinstalls. Then I tried the HDMI cable in my main pc, and it also wasn't displaying anything, which had me quite confused because t it was working on my laptop. Very weird. Anyway, another HDMI cable 'sorted' the issue for me. 

[[Support] Linuxserver.io - Bazarr]

Does anybody have this working with Sonarr-V3 ?

[[Support] SpaceinvaderOne - Macinabox]

4 hours ago, dexxy said:

Hi all! @SpaceInvaderOne thanks a ton for this container. I've been thinking about getting a hackintosh up and running and your Catalina update tipped me over the edge.

 

Everything's running just fine as long as I don't touch the CPU pins. I applied the XML corrections, but maybe I've missed something? Screen shots and XML below.

 

On 11/4/2019 at 3:17 AM, blaine07 said:

Every time I go through these motions once I start the VM it shows loading bar multiple times and appears to fully boot but graphics super borked of having the desktop like gargley across top of screen several times.

On 10/30/2019 at 3:14 AM, frodr said:

Great docker container and video. Everything worked fine until I changed cpu pinning and memory, then this black screen. Xml mods done.

On 10/29/2019 at 1:11 AM, CorneliousJD said:

Ok so mostly smooth so far but I don't keep my VMs in /mnt/user/domains so i had to do some tweaking.

I'm sure I've mucked something up now in the works but cannot figure it out.

 

Anyone care to take a look?

On 10/31/2019 at 12:03 PM, Young_Max said:

When I use default setting（2 cpu ，4096MB ） to install macos catalina，it's fine. But I change cpu number to 4

 

This post talks about another XML correction. Copying the <os> </os> section of your original xml back in after making edits.

Saved me from the exact same graphical issues you are having when changing cpu threads. 

 

 

[[Support] SpaceinvaderOne - Macinabox]

On 10/31/2019 at 11:25 AM, DontWorryScro said:

for people who booted up fine the first time around, decided to give more cores or ram and went back to find the apple logo upper left and weird graphical anomalies try restoring the <os> section of the xml with what was originally there when you first installed.  You're welcome.

 

<os>

<type arch='x86_64' machine='pc-q35-3.1'>hvm</type>

<loader readonly='yes' type='pflash'>/mnt/user/domains/MacinaboxCatalina/ovmf/OVMF_CODE.fd</loader> <nvram>/mnt/user/domains/MacinaboxCatalina/ovmf/OVMF_VARS.fd</nvram>

</os>

Saved me, Thank you

[[Support] binhex - DelugeVPN]

oh so you did, my bad. 👍

[[Support] binhex - DelugeVPN]

40 minutes ago, strike said:

 

Edit the auth file located in your delugevpn appdata dir. Add the user/pass on a new line in this format: 

username:password:10

 

3

This was already in my auth file. ?

 

16 hours ago, binhex said:

it looks like a value for encryption is set to a negative decimal value, 

 

my core.conf had 

  "enc_in_policy": -1, 
  "enc_out_policy": -1, 

I renamed and made a new one, where the enc_in value is 1, and there is no enc_out. I'm back up and running, thanks a lot. 

[[Support] binhex - DelugeVPN]

Wondering if i could get some help with an error. My deluge has been working fine for months with my VPN. recently I had to reset my PW, and after updating in the docker information I cannot access the Deluge docker anymore. 

From the logs the VPN seems to connect ok, but I have even disabled the VPN connection and it seems to be the same error. 

[info] Deluge process started
[info] Waiting for Deluge process to start listening on port 58846...

2019-03-26 08:47:36,496 DEBG 'watchdog-script' stderr output:
Unhandled error in Deferred:


2019-03-26 08:47:36,497 DEBG 'watchdog-script' stderr output:

Traceback (most recent call last):
File "/usr/lib/python2.7/site-packages/deluge/main.py", line 241, in start_daemon
Daemon(options, args)
File "/usr/lib/python2.7/site-packages/deluge/core/daemon.py", line 170, in __init__
component.start("PreferencesManager")
File "/usr/lib/python2.7/site-packages/deluge/component.py", line 296, in start
deferreds.append(self.components[name]._component_start())
File "/usr/lib/python2.7/site-packages/deluge/component.py", line 124, in _component_start
d = maybeDeferred(self.start)
--- <exception caught here> ---
File "/usr/lib/python2.7/site-packages/twisted/internet/defer.py", line 151, in maybeDeferred
result = f(*args, **kw)
File "/usr/lib/python2.7/site-packages/deluge/core/preferencesmanager.py", line 186, in start
self._on_set_encryption)
File "/usr/lib/python2.7/site-packages/deluge/config.py", line 319, in register_set_function
function(key, self.__config[key])
File "/usr/lib/python2.7/site-packages/deluge/core/preferencesmanager.py", line 362, in _on_set_encryption
lt.enc_policy(self.config["enc_out_policy"])
exceptions.OverflowError: can't convert negative value to unsigned

I have removed the docker and reinstalled from template, but same issues, I have attached the 'full' log but please let me know if there is more info i can provide. 

 

Much thanks,

samtrois

deluge.log

[Failing Parity drive?]

4 minutes ago, Benson said:

BTW, it is the same drive "R6H1LS5Y",

Yes, this is the exact same drive as the report posted in the first post.  The images are the current status of the drive. 

 

I really don't want to send it away for 2 weeks just to have them tell me its fine.