V..
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by V..
-
-
Hello,
Sorry but I am still stuck trying launch this docker.I am quite new, but is it possible that my issue come from the "$DEFAULT_GATEWAY" ?
I tried to run command seperately and when I try : ip route add default via $DEFAULT_GATEWAY table rutorrent_https
It show : inet address is expected rather than "table".
See below the result of route :
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default gateway 0.0.0.0 UG 0 0 0 eth0
172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
192.168.1.0 gateway 255.255.255.0 UG 0 0 0 eth0
Does anyone have an idea ?
Thank you.
-
Thank you, I tried and the issue is still here.
(I also tried to instal deluge container = same issue)
If I can do anything that could help for understanding It will be a pleasure
-
THank you for your help.
I confirm, I am on Synology DS916+ (DSM 6.0.2-8451 Update 9).
I tried through the GUI (except for localtime line that I can't do) but result is the same : "iptables: No chain/target/match by that name."
172.17.0.0/16 is my docker LAN, I tried with my local LAN also : 192.168.1.0.
If you have an idea, I take it with pleasure :-)
I would love to succed to get RUtorrent and VPN
-
Dear Hansel,
I tried again today and it still don't work.
I tried the enclosed command lines to run container, could you tell me if yours looks like the same ?
Regards.
-
Hello,
Thank you for you reply and sorry for my badly formatted post (my first post).
I tried to instal as following :
- Launch following :
sudo insmod /lib/modules/tun.ko
sudo insmod /lib/modules/iptable_mangle.ko- Launch your command text adjusted with my parameters (without "--cap-add=NET_ADMIN \")
- Stop container
- Put openvpn key
- Add "Execute container using high privilege"
- Launch container again
But unfortunately it still show the same error, is there something wrong ?
What is the command for "Execute container using high privilege" that I could add to your command text ?
Thank you.
-
Hello,
It looks like I have the same issue than "Hansel" during installation :
01:46:54 2017-03-09 02:46:54,448 DEBG 'start-script' stdout output:
stdout01:46:54--------------------
stdout01:46:54stdout01:46:542017-03-09 02:46:54,458 DEBG 'start-script' stdout output:
stdout01:46:54[info] iptable_mangle support detected, adding fwmark for tables
stdout01:46:54stdout01:46:542017-03-09 02:46:54,519 DEBG 'start-script' stderr output:
stdout01:46:54iptables: No chain/target/match by that name.
stdout01:46:54stdout01:46:542017-03-09 02:46:54,527 DEBG 'start-script' stderr output:
stdout01:46:54iptables: No chain/target/match by that name.
stdout01:46:54stdout01:46:542017-03-09 02:46:54,535 DEBG 'start-script' stderr output:
stdout01:46:54iptables: No chain/target/match by that name.
stdout01:46:54stdout01:46:542017-03-09 02:46:54,543 DEBG 'start-script' stderr output:
stdout01:46:54iptables: No chain/target/match by that name.
stdout01:46:54stdout01:46:542017-03-09 02:46:54,572 DEBG 'start-script' stdout output:
stdout01:46:54[info] iptables defined as follows...
stdout01:46:54--------------------
stdout01:46:54stdout01:46:542017-03-09 02:46:54,576 DEBG 'start-script' stdout output:
stdout01:46:54-P INPUT DROP
stdout01:46:54-P FORWARD ACCEPT
stdout01:46:54-P OUTPUT DROP
stdout01:46:54-A INPUT -i tun0 -j ACCEPT
Then I can't access to the web page, does anyone find a way to fix it ?
Here is my installation command, do you find something wrong ?
docker run -d \
--cap-add=NET_ADMIN \
-p 9080:9080 \
-p 9443:9443 \
-p 8118:8118 \
--name=Rtorrent-OpenVPN \
-v /volume2/RuTorrent:/data \
-v /volume2/docker/Rutorrent-OpenVPN:/config \
-v /etc/localtime:/etc/localtime:ro \
-e VPN_ENABLED=yes \
-e VPN_USER=xxx \
-e VPN_PASS=xxx \
-e VPN_REMOTE=fr1.vpn.goldenfrog.com \
-e VPN_PORT=1194 \
-e VPN_PROTOCOL=UDP \
-e VPN_DEVICE_TYPE=tun \
-e VPN_PROV=custom \
-e STRONG_CERTS=no \
-e ENABLE_PRIVOXY=no \
-e ENABLE_FLOOD=no \
-e LAN_NETWORK=192.168.1.0/24 \
-e NAME_SERVERS=8.8.8.8,8.8.4.4 \
-e DEBUG=false \
-e PHP_TZ=UTC \
-e PUID=1038 \
-e PGID=100 \
binhex/arch-rtorrentvpnThank you.
[Support] binhex - rTorrentVPN
in Docker Containers
Posted
Unfortunately even Deluge isn't working for me.
I really don't understand, as Haugene-transmission-openvpn and linuxserver-rutorrent containers are perfectly working.
I try to find an openvpn client to set up, did you look at this from your side ?
To purpuse would be to launch a container for the openvpn connection, then configure other container to use it connection.
Thank you.