[Temperature Monitoring]

I don't know how common it is for the drives today to not have temperature sensors so not sure how much effort is really needed on this.   

 My work around is working well for now.   Thank you for the update!!

 

I find it odd that Unraid is able to count the UD drives towards the license but is not able to adjust monitoring thresholds for them.  Perhaps a later version will address this.   However with such a great piece of software it really is a minor complaint.

 

Thanks to both of you on your hard work making Unraid the great OS it is.

[Temperature Monitoring]

15 minutes ago, paultn said:

Nevermind it now triggering the warning instead of the critical

 

Ok so I found a work around.

 

Settings>Disk settings will set the warning and critical for all disks including those in UD.   So set these to 0 for both Critical and Warning (This disables it).  Now nothing alerts.

Go back to Main Dashboard screen and click the Thumb up icon and can set all the disks to their own threshold.  (UD device won't allow setting so it will use the one set in settings)

I tested this by setting all the disks to a very low temp threshold to test and they all triggered except the UD device. 

 

This seems to be a good workaround but an easier more intuitive way of doing it would be nice.  (like being able to set the temp threshold just for the UD disk)

[Temperature Monitoring]

20 minutes ago, paultn said:

Thanks I tried setting the Critical temp alert to 129.  This way it won't alert.   However I left the warning as 45.  This way I should still get a warning if something is going wrong but hopefully won't keep getting critical alerts.   

 

Would be nice to be able to disable it on a per drive basis though.

Nevermind it now triggering the warning instead of the critical

[Temperature Monitoring]

3 minutes ago, bonienl said:

Default temperature thresholds are set under Settings -> Disk Settings.

 

Setting these to zero will disabled monitoring of all devices (not recommended). Perhaps UD uses these default thresholds?

 

Thanks I tried setting the Critical temp alert to 129.  This way it won't alert.   However I left the warning as 45.  This way I should still get a warning if something is going wrong but hopefully won't keep getting critical alerts.   

 

Would be nice to be able to disable it on a per drive basis though.

[Temperature Monitoring]

29 minutes ago, dlandon said:

Can you show me the output of this command?

/usr/sbin/smartctl -A /dev/sdX

Where X is the device designator.

 

As you can see it always says the temp is 128.   I can assure you its not   I have no problem ignoring this however the alerts that get generated become irritating after awhile lol.

[Temperature Monitoring]

Hello,   Sorry if this is not the correct place to post this.

 

I have an old OCZ Agility 3 SSD running as my download drive through unassigned devices plugin.   The drive does not have a temperature sensor on it and always reports 128.   This is triggering temperature warnings constantly from the server.   Is there any way to disable these warnings?   I would prefer to just disable them for this drive but if needed all temperature warnings could be disabled.