[Adding a P2000 to my build...what am I doing wrong?]

The only time i've had issues with the USB not working has been when i've added an additional card to the system (the P2000). Otherwise, the system has run flawlessly for the past 18 months. So i'm not sure if the BIOS would be the cause of the problem.

My only concern with updating the BIOS would be the system bricking or causing some new issue. I don't want to try to update the BIOS unless that's definitely the problem - if the system bricks etc. then it's down until I fix it, track down any new issues or replace the system.

[Adding a P2000 to my build...what am I doing wrong?]

Hi All,

 

Hopefully your able to assist. My current build consists of:

 

Motherboard: MSI B350 Mortar Arctic

CPU: Ryzen 2400G

RAM: 24GB DDR4 RAM (2666Mhz) - I'm aware that Ryzen prefers faster RAM but I've had zero issues so far.

HBA Card: LSI 9211-8i SAS Card

HDDs: 7 for Array, 1 for Parity, 2 for SSD Cache all connected to HBA

 

The Problem:

I purchased a Quadro P2000 to add to my build to increase the number of transcodes i'm able to do, as the majority of my playing is done off site now that i've moved house. When I added the drive into a free PCIE slot on the motherboard, I can't get the system to load properly. It boots and starts loading Unraid but then all the USB ports stop working and it doesn't fully load Unraid.

 

I've tried switching which PCIE slot the P2000 and HBA are plugged into and this doesn't help.

 

The Solution:

Through some browsing online, I believe this may be due to not enough PCIE lanes available from the 2400G? I don't know if that's right though. If that's the case, then it would mean an upgrade to a different CPU/Motherbaord combo.

 

Any feedback would be great. If I don't need to go and spend a bunch of money on new parts that's great. If I do, then cool - new upgrade time

[Adding a P2000 to my build...what am I doing wrong?]

Hi All,

 

Hopefully your able to assist. My current build consists of:

 

Motherboard: MSI B350 Mortar Arctic

CPU: Ryzen 2400G

RAM: 24GB DDR4 RAM (2666Mhz) - I'm aware that Ryzen prefers faster RAM but I've had zero issues so far.

HBA Card: LSI 9211-8i SAS Card

HDDs: 7 for Array, 1 for Parity, 2 for SSD Cache all connected to HBA

 

The Problem:

I purchased a Quadro P2000 to add to my build to increase the number of transcodes i'm able to do, as the majority of my playing is done off site now that i've moved house. When I added the drive into a free PCIE slot on the motherboard, I can't get the system to load properly. It boots and starts loading Unraid but then all the USB ports stop working and it doesn't fully load Unraid.

 

I've tried switching which PCIE slot the P2000 and HBA are plugged into and this doesn't help.

 

The Solution:

Through some browsing online, I believe this may be due to not enough PCIE lanes available from the 2400G? I don't know if that's right though. If that's the case, then it would mean an upgrade to a different CPU/Motherbaord combo.

 

Any feedback would be great. If I don't need to go and spend a bunch of money on new parts that's great. If I do, then cool - new upgrade time

 

 

 

 

 

 

[[Support] Linuxserver.io - Ombi]

I know this has been asked before...but Ombi URL... what am I putting here so that I can access through the app outside of the network?