[kernel: mpt2sas_cm0: fault_state(0x2622)!]

I'm trying to recall exactly what I did.  I do remember putting a fan in a bracket above the card to provide more airflow, and I think that helped.

 

I ended up switching away from unRAID and back to ZFS.  I'd like the idea and features of unRAID, but with situations like this, or improper shutdowns, completely invalidating the array and requiring a party check, made me a bit uneasy of data loss.  After switching to Ubuntu and ZFS, I haven't had any issues.

 

Good luck!

 

 

 

[kernel: mpt2sas_cm0: fault_state(0x2622)!]

I've had this problem occur twice now.

I get a fault on the 9211 card, and then all my devices start erroring out.

 

The error looks like this --

 

Mar 31 05:24:59 Tower kernel: mpt2sas_cm0: fault_state(0x2622)!
Mar 31 05:24:59 Tower kernel: mpt2sas_cm0: sending diag reset !!
Mar 31 05:25:00 Tower kernel: mpt2sas_cm0: diag reset: SUCCESS
Mar 31 05:25:00 Tower kernel: mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
Mar 31 05:25:00 Tower kernel: mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(00.00.00.00)
Mar 31 05:25:00 Tower kernel: mpt2sas_cm0: Protocol=(
Mar 31 05:25:00 Tower kernel: Initiator
Mar 31 05:25:00 Tower kernel: ,Target
Mar 31 05:25:00 Tower kernel: ), 
Mar 31 05:25:00 Tower kernel: Capabilities=(
Mar 31 05:25:00 Tower kernel: TLR
Mar 31 05:25:00 Tower kernel: ,EEDP
Mar 31 05:25:00 Tower kernel: ,Snapshot Buffer
Mar 31 05:25:00 Tower kernel: ,Diag Trace Buffer
Mar 31 05:25:00 Tower kernel: ,Task Set Full
Mar 31 05:25:00 Tower kernel: ,NCQ
Mar 31 05:25:00 Tower kernel: )
Mar 31 05:25:00 Tower kernel: mpt2sas_cm0: sending port enable !!

 

After this occurs all my devices have I/O errors --

Mar 31 05:26:20 Tower kernel: print_req_error: I/O error, dev sdr, sector 3264152816
Mar 31 05:26:20 Tower kernel: sd 7:0:4:0: [sdf] tag#2 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
Mar 31 05:26:20 Tower kernel: sd 7:0:17:0: [sds] tag#50 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
Mar 31 05:26:20 Tower kernel: sd 7:0:4:0: [sdf] tag#2 CDB: opcode=0x88 88 00 00 00 00 02 2f 8c 76 c8 00 00 00 08 00 00
Mar 31 05:26:20 Tower kernel: sd 7:0:17:0: [sds] tag#50 CDB: opcode=0x88 88 00 00 00 00 00 c2 8f 04 f0 00 00 00 08 00 00

x

The motherboard is a X9SCL, in a super micro SC846 (SAS2 backplane), ECC ram

 

The 9211-8i card has the p20 firmware.

 

Has anyone had this occur? 

 

I've attached the diagnostics as well

tower-diagnostics-20190331-1416.zip