T3nchu
-
Posts
24 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by T3nchu
-
-
Think I got it figured out. I replaced the PCI cards. Upgrade to 6.7.2. Reassignment my drives and check parity correct. It started a parity check and flag the error drive. After replacing the drive restart the server, it started to rebuild my replaced drive. Once this is done, i will work on my other V5 UNRAID server with new parts.
-
I currently have a fail drive but the config is valid. Is that ok for my to update to V6 and rebuild the drive?
-
I have 4.7 UNRAID with RAID bus controller: Marvell Technology Group Ltd. MV64460/64461/64462 System Controller, Revision B (rev 01). I know there are issue with this card type. I keep getting a fail drive randomly. Initially, I would rebuild the drive and sometimes it would be months before it fail again. Recently, I can't seems to rebuild the drive anymore. It would initiate rebuild then fail. The drive I put is precleared. How do I go about and save my system? I purchased a LSI 9207-8i card, but the system is not recognizing it (according to the company I purchase the card from, it is in IT mode). Any help would be greatly appreciated.
Rebuild drive keep failing
in General Support
Posted · Edited by T3nchu
Not sure if this a hardware or software issue. I keep getting error when I try to rebuild a drive. I usually preclear the drive once. The rebuild would fail at different point each time. Thanks
syslog.txt